Products in Industrial: Good Electrical Properties

ProPolymers PPS 20GF is a 20 % fiberglass reinforced polyphenylene sulfide compound that offers a superior combination of mechanical, electrical, and thermal properties. PPS is inherently flame resistant with low smoke emission. It provides outstanding processability and chemical resistance.

MECHETEC® PEEK ( Polyetheretherketone) is a semi-crystalline high temperature thermoplastic that offers design engineers a truly unique combination of exceptional performance characteristics. When compared with other engineering polymers, this material ranks as the best or nearly the best in every performance category. MECHETEC® PEEK has a relative thermal index of 480°F and has a UL 94 flammability rating of V-0, with very low levels of smoke generation and toxic gas emission. Additionally, this material exhibits excellent electrical properties, which remain stable over a wide range of both temperatures and frequencies. MECHETEC® PEEK is chemically resistant to a wide range of organic and inorganic liquids and is insoluble in all common solvents. In addition, it is unaffected by steam and hot water and has a very low moisture absorption rate. This material offers superior dimensional stability and machines easily. While unfilled MECHETEC® PEEK offers good wear resistance, Polymer Industries also offers MECHETEC® PEEK with glass fiber filled options as well as Carbon and Teflon filled options. Formally known as Unitrex Peek. For more Info : Click Here

Tufnol Grade 10G/41 is a high quality epoxy resin bonded glass fabric laminate. It offers very high mechanical strength and low moisture absorption, combined with excellent electrical properties, under both dry and humid conditions. They are rigid materials with good dimensional stability, controlled flammability and good resistance to a wide range of working environments.

FILAVA™ WF BSB3_120.XXX.0127.T2/2.ISAA continuous filament for technical textiles and high-performance composites.

Dynacast Industrial Products Butyl Rubber - BUTYI has a very high impermeability to gasses and is used for the inner tubes of pneumatic tires, and in vacuum and high pressure applications. It has an unusually broad loss peak so that, despite having a glass transition temperature as low as -65C, it displays high damping at ambient temperatures. Butyl Rubber has good ozone, weathering, heat and chemical resistance. It is not suitable for use in contact with mineral oils. Butyl rubber has low resilience at ambient temperatures and is suitable for damping applications.

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

E-glass 1080 is also known as electrical glass—is the standard glass composition used for most glass fibers. It is made from the oxides of silicon, aluminum, calcium, magnesium, and boron.

GREENSTAB® 4220(P) is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

I-Speed® laminate and prepreg products are manufactured with Isolas' patentable high performance multi-functional resin system, reinforced with electrical grade (E-glass) glass fabric. This system delivers a 15% improvement in Z-axis expansion and offers 25% more electrical bandwidth (lower loss) than competitive products in this space. These properties coupled with superior moisture resistance at reflow, result in a product that bridges the gap from both a thermal and electrical perspective. The I-Speed® resin system is laser fluorescing and UV blocking for maximum compatibility with Automated Optical Inspection (AOI) systems, optical positioning systems and photo imageable solder mask imaging.

Tufnol Grade 10G/42 is a high quality epoxy resin bonded glass fabric laminate. It offers very high mechanical strength and low moisture absorption and high temperatures, combined with excellent electrical properties, under both dry and humid conditions. They are rigid materials with good dimensional stability and good resistance to a wide range of working environments. It is suitable for uses up to 155°C (Class F).

avanSTATIC TPU-B255 are uses of TPU is causing a multitude of thermoplastics with completely different characteristics to be found under this denomination. Given this versatility and variety of TPUs in the market, avanzare has developed a wide variety of additives in various formats to respond to each of the requests shown by the market.

avanSTATIC TPU MB are uses of TPU is causing a multitude of thermoplastics with completely different characteristics to be found under this denomination. Given this versatility and variety of TPUs in the market, avanzare has developed a wide variety of additives in various formats to respond to each of the requests shown by the market.

PPS-SGL451T65 PPS is a 45% special glass fiber reinforced low chlorine polyphenylene sulfide compound, its CL content is in 900PPM below, mainly used in the field of halogen content requirements.

Mar-Bal MB2000-15 is an excellent flame and track resistant material possessing outstanding electrical and mechanical properties.

INOFLON® 210 has good flow with high bulk density and good mold filling behavior and it is used in automatic and isostatic molding of parts, molded sheets, small diameter and thin wall thickness tube.

avanION 35 is a material widely used in industry in both rigid and foamed applications. The final density obtained as well as the type of polyol play a crucial factor in the antistatic characteristics of the system. avanzare has developed a variety of products that, depending on the type of application and foam structure, can be used as the main and unique antistatic agent or as synergistic with other products on the market.

Tachyon 100G materials exhibit exceptional electrical properties that are very stable over a broad frequency and temperature range between -55°C and +125°C up to 100 GHz. These electrical properties provide designers a scalable solution for next generation designs of backplanes and daughter cards, enabling 10x improvements from 10 Gb/s data rates. Isola has developed Tachyon 100G with the highest level of thermal performance for high layer count line cards. The very low Z-axis CTE makes it a perfect choice for fine pitch BGA applications of 0.8 mm or less. The material is optimized with the use of spread glass to mitigate skew, improve rise times, reduce jitter, and increase eye width/height and that use ultra smooth HVLP (VLP2) 2um Rz copper that significantly reduces conductor losses.

PPS-SGL401A87 PPS is a 40% special glass fiber reinforced low chlorine polyphenylene sulfide compound, its CL content is in 900PPM below, mainly used in the field of halogen content requirements.

E-glass 1297 is also known as electrical glass—is the standard glass composition used for most glass fibers. It is made from the oxides of silicon, aluminum, calcium, magnesium, and boron.

BPS provides outstanding thermal stability and electrical Performance.It is particularly suitable for engineering plastic applications such as polyesters(PET,PBTandPCT) and polyamides(nylons).

GREENSTAB® 5115(PF) is used by PVC Pipe Manufacturers,PVC Accessories Manufacturers,PVC Cable Manufacturers.

Next ABS SX-02BK is ABS Modified Black Compound.

E-glass 106 is also known as electrical glass—is the standard glass composition used for most glass fibers. It is made from the oxides of silicon, aluminum, calcium, magnesium, and boron.

ProPolymers PEI 2100 is a 10% glass filled polyetherimide that offers a superior combination of mechanical, electrical, and thermal properties. PEI is inherently flame resistant with low smoke emission. It provides outstanding processability and good chemical resistance.

INNOPRENE 1450 is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing.

Korrels B.V. PA, 20% glass fiber reinforced, heat stabilized, natural is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

6G30 is a grade of Glass Fiber Reinforced which offers high mechanical properties, good behavior of electricity, good heat resistance, good processibility and good flammability after joined flame retardant agent. It is used for electric tool, machine tool electrical apparatuses, junction box for automobile, electric plug-in unit, electric switch, communications equipment's, computer parts, etc.

Korrels B.V. PA, 15% glass fiber reinforced, heatstabilized, natural is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

Armlen PP MD 40-11TS is a 40% mineral filled, thermostabilized polypropylene. This material displays high mechanical and electrical properties; is resilient to cold and hot water, alkali, acids and detergents, organic polar solvents (acetone, spirits etc.), benzene fumes. Designed for injection molding and extrusion of various items and parts for construction, electrical tools, machine engineering, household appliances, transportation, camping equipment and etc. Available in white color.

Carbkid® Fiber VE SMC is a polymer composite material reinforced with carbon fiber, which consists of a thermoset resin (usually vinylester or epoxy) and different additives that allow to obtain certain specific characteristics and improve the behavior of the material during the molding process of the final product. While the standard SMC is reinforced with glass fibers, the CSMC is reinforced with cut fibers or carbon fabrics. CSMC materials combine the low-weight characteristics offered by carbon composites in conjunction with a widespread forming process, such as compression molding, which allows for short manufacturing cycles and is therefore suitable for industrial applications in large series.

Qpac® 130 Poly(Cyclohexene Carbonate) is an amorphous, clear, readily processable solid polymer with long-term mechanical stability.

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

Vertec™ 1024 is PTFE (polytetrafluoroethylene) reinforced with glass fiber. Glass fiber improves the wear properties of PTFE, lowers the deformation under load at both high and low temperatures, and increases the impact resistance while leaving the electrical and chemical characteristics of PTFE essentially unchanged. It is suitable for piston rings, valve seats, shaft seals, electrical insulators, bearing pads and gaskets. This material should not be used in contact with strong alkalis and hydrofluoric acid.

Tufnol Grade 10G/40 is a high-quality epoxy resin bonded glass fabric laminate. It offers very high mechanical strength and low moisture absorption, combined with excellent electrical properties, under both dry and humid conditions. They are rigid materials with good dimensional stability and good resistance to a wide range of working environments. This is the most widely used grade, suitable for continuous use at temperatures up to approximately 130°C (Class B).

Glass-filled PTFE - GS020X12A is an extremely tough, weatherproof, interface material that can be cut or stamped into configurations to match the dimensions of the opposing surfaces. Fluoro-Plastics has been producing compounded PTFE products and shapes since compounding was invented.