Products

Toray Amilan® CM1021 FS is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America.

Amilan® U141 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: impact resistant.

Toray Toraycon® 1401X06 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America. Typical application Automotive. Primary characteristic includes flame rated.

Toray Torelina® A604 is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated Good Toughness.

Toray Toray AmberTool® TC40 is a BMI resin that which provides excellent elevated temperature properties and processability. Toray AmberTool TC40 has been designed for high temperature tooling Applicationss. BMI Tooling Prepreg.

Toray Toraypef® 30030 AP66 is a Polyolefin product. It can be processed by foam processing or vacuum casting and is available in Asia Pacific, Europe, or North America. Typical application includes foam.

Toray Toraycon® 1101H is a Polybutylene Terephthalate + PET (PBT+PET) product filled with 40% mineral. It is available in Asia Pacific, Europe, or North America.Characteristics includes flame rated and good esthetics.

Toray E722 is a 120°C (248°F) cure toughened epoxy component prepreg. E722 is designed for structural Applicationss in the motorsport and marine industries. Toray E722 would also suit general aircraft fittings, sporting equipment, and a wide range of engineering Applicationss. Toray E722 is compatible for co-cure with Toray MicroPly™ EF72, a 120°C (248°F) cure resin film, and Toray MicroPly™ SC72A syntactic core. 120°C (248°F) Cure Toughened Epoxy Resin System

Toray Toray CFRT® TL-2100 consist of the same composition resin, carbon fiber, and laminate )concept of our proprietary sandwich construction. The carbon fiber (graphite) provides strength, stiffness, and durability. TL-2100 Semi-Flex, Semi-Rigid, Rigid, and Ultra differ only in terms of the volume of carbon fiber used and the thickness of the sheet material. TL-2100’s custom-designed weave provides high-strength carbon fiber in the longitudinal direction of an orthotic.

Toray Toraycon® 1101G-X53 is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America.Characteristics includes flame rated and good esthetics.

Toray Torelina® A310M is a Polyphenylene Sulfide (PPS) product filled with 70% glass\mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and warp resistant.

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

Toyolac® TM335-GM2 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: high flow.

Toray C640 is a cyanate ester resin system suitable for curing between 70°C (158°F) and 135°C (275°F). The medium viscosity resin is pre-impregnated into high-performance fibers such as carbon, glass and aramid. The system is capable of withstanding very high temperatures and is inherently flame-retardant. After a suitable post cure, the glass transition temperature can be increased to as high as 335°C (635°F).

Toraycon® 1050M by Toray is comprised of Polybutylene Terephthalate. It is commonly used

Toray E731 is a toughened epoxy resin system designed to deliver enhanced resin clarity for cosmetic components within high performance automotive. The resin formulation ensures that components are free from white-spots and exhibit high clarity.

Toray Toyolac® 834V-X01 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and flame retardant.

Toray BT250E-6 resin system is a 121°C (250°F) cure epoxy prepreg with excellent strength and stiffness. It provides an outstanding surface finish under vacuum bag/oven cure. BT250E-6 has an FAA-conformed database on carbon IM-7 uni-directional tape, S2-glass, and AS-4C plain weave.

Toray MS-1A is a high performance carbon fiber/epoxy resin compression molding system based on high-modulus carbon fiber. MS-1A compression molding compound yields unparalleled stiffness and high strength. MS-1A is qualified for space Applicationss. 138°C (280°F) Cure High-Modulus Compression Molding System

Toray Toraycon® 1401X04 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and good toughness.

Toray Amilan® CM3004G-15 is a Polyamide 66 (Nylon 66) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and flame retardant.

Toray Toray Cetex® MC1100 PPS is a thermoplastic bulk molding compound (BMC) based upon Toray Cetex® TC1100 PPS thermoplastic uni-directional tape. Toray Cetex® MC1100 PPS is offered on standard-modulus fibers in lengths of up to 25.4 mm (1”). Intermediate-modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. Many composite compression molded parts are used to replace metal parts for weight savings or replace plastic injection molded parts where higher strengths or stiffness are required. Toray Cetex® MC1100-4A, PPS, 25.4 mm (1”) represents standard-modulus AS-4 fiber chopped to 25.4 mm (1”) in length.

Toray Toray MicroPly™ SC72A is a 120°C (248°F) curing low-density unsupported epoxy syntactic core. Toray MicroPly™ SC72A offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin-walled composite sandwich structures. Considerable cost reductions can be realized when SC72A replaces prepreg as the core material, and where sandwich cores below 3 mm are difficult to achieve in honeycomb core, Toray MicroPly™ is a superior alternative. Toray MicroPly™ SC72A is available in a variety of thicknesses down to 1 mm and is easily contoured and shaped. SC72A is supplied on a roll (15 m x 400 mm) or in sheets (625 mm x 400 mm). Toray MicroPly™ SC72A is compatible for co-cure with Toray E720 and E722 mid temperature curing prepregs.

Toray Toraycon® 5201X11 is a Polybutylene Terephthalate (PBT) product. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and impact resistant.

Toray Siveras™ L304M35 is a Liquid Crystal Polymer (LCP) product filled with 35% glass\mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated, high flow and warp resistant.

Toray Toray AmberTool® HX32-1 New is an epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 140°C (284°F) is achieved. Toray AmberTool® HX32-1 prepreg is ideal for large tooling Applicationss. 65–80°C (149–176°F) Curing Epoxy Tooling Prepreg.

Toray Toyolac® ASG-40 is a Styrene Acrylonitrile (SAN) product filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic is flame rated.

Toray Torelina® A400M-X05 is a Polyphenylene Sulfide (PPS) product filled with 60% glass\mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and high strength.

Torelina® A900 is a Polyphenylene Sulfide (PPS) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Toray Siveras™ LX70U30 is a Liquid Crystal Polymer (LCP) product filled with 35% mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated, good toughness, high flow warp resistant.

Toray Amilan® CM3001R is a Polyamide 66 (Nylon 66) product filled with 40% mineral. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated and warp resistant.

Toyolac® 125-X82 is an Acrylonitrile Butadiene Styrene (ABS) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Toray Torelina® A310MX04 is a Polyphenylene Sulfide (PPS) product filled with 65% glass\mineral. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray Torayca® NX85K-15 is a Polycarbonate (PC) product filled with 5.0% carbon fiber and 8.0% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray Toyolac® 100G-10 is an Acrylonitrile Butadiene Styrene (ABS) product filled with 10% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray Torelina® A604-X95 is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics includes flame rated Good Toughness.