Products

Tarnoform® 300 GB2 there is 10% glass beads filled injection-molding grade - increased stiffness and hardness with reduced shrinkage.

Poliamid 6 impact modified grade. ISO 1874-1: PA 6-HI, MR, 14-020

Tarnamid® T-27 GF30 W is a 30% glass fiber reinforced polyamide 6 compound, specially UV-stabilized grades for outdoor applications.

It is low-medium viscosity general purpose polyamide 6, containing release agent. ISO 1874-1: PA 6, MR, 14-030N

Tarnamid® T- 27 MT 20 is a 20% mineral filled polyamide 6 compound, heat stabilized.

Grupa Azoty S.A Tarnoform® 300 GF4 is a 20% glass fibers reinforced injection-molding grade with high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Grupa Azoty S.A Tarnoform® 300 GF3 is a 15% glass fibers reinforced injection-molding grade with increased strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

It is flame retarded polyamide 6 compound, halogen and phosphorous free, good electrical properties. ISO 1874-1: PA 6, MFR, 14-040

Tarnamid® T- 27 GF25 FRV0 is a polyamide 6 containing 30% glass reinforced, heat stabilized, flame retardant.

Tarnoform® 400 UV is a easy flowing grade containing special carbon black giving maximum resistance against uv light exposure degradation. Only black color.

Tarnamid® T-27 GF30 FR850 is a polyamide 6 containing 30% glass reinforced, heat stabilized, flame retardant.

It is low-medium viscosity general purpose polyamide 6, containing release agent and colorant. ISO 1874-1: PA 6, MC2R, 14-030

Grade with lowered wear coefficient modified with special chalk ISO 9988-1: POM-K, M-GNR, 03-002, K5

Easy flowing grade, lowered viscosity ISO 9988-1: POM-K, M-GNR, 04-002

Tarnamid® T-27 GF15 ESD by Grupa Azoty S.A is commonly used as Molding Resin for a variety of applications. It is available in Granules form.

Grupa Azoty S.A Tarnoform® 300 SI is an Acetal (POM) Copolymer material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnoform® 300 SI are: Flame Rated Chemical Resistant Bacteria Resistant Copolymer Fatigue Resistant Typical applications include: Engineering/Industrial Parts Automotive Plumbing/Piping/Potable Water

Grade with lowered wear and friction coefficient modified with PTFE ISO 9988-1: POM-K, M-GNS2, 03-002

Grade with high impact strength ISO 9988-1: POM-K, M-GNPR, 02-001

Tarnamid® T-27 GF18 by Grupa Azoty S.A is commonly used as Molding Resin for a variety of applications. It is available in Granules form.

Grade with very high impact strength ISO 9988-1: POM-K, M-GNPR, 02-001

Grade with lowered wear coefficient modified with molybdenium sulphite for higher loaded elements ISO 9988-1: POM-K, M-GNS2, 03-002

Tarnamid® T- 27 CF20 is a 20% carbon fiber reinforced polyamide 6 compound, heat stabilized, good conductive and electrostatic properties.

Very high impact grade, also at low temperatures, high strength along weld lines ISO 9988-1: POM-K, M-GNPR, 01-001

Tarnamid® T- 27 CF40 is a 40% carbon fiber reinforced polyamide 6 compound, heat stabilized, good conductive and electrostatic properties.

Tarnamid® T-27 G is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-090, Z

Tarnamid® T-27 GF25 HL is a 25% glass fiber reinforced polyamide 6 compound, heat stabilized and UV stabilized.

Grupa Azoty S.A Tarnamid® T-27 GF30 H2 is a 30% glass fiber reinforced polyamide 6 compound, heat stabilized by cooper/potassium iodide stabilizing system (H2 code) protecting polymer against influence of elevated temperature.

It is high viscosity general purpose polyamide 6, containing release agent. ISO 1874-1: PA 6, M2R, 22-030N

Grupa Azoty S.A Tarflen® DN-R is a Polytetrafluoroethylene (PTFE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or pipe extrusion.Important attributes of Tarflen® DN-R are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Adhesives/Tapes Fabrics/Fibers Hose/Tubing

Tarnamid® T-27 GF30TF15 is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-090, GF30Z15

Tarnoform® 300 AF there is injection-molding grade, modified with addition of micron-sized PTFE fibers.

Tarnoform® 300 HD1 by Grupa Azoty S.A is comprised of Polyacetal Copolymer. It is commonly used It is available in Granules form.

Tarnoform® 300 HG220 by Grupa Azoty S.A is comprised of Polyacetal Copolymer. It is commonly used It is available in Granules form.

Tarnamid® T-27 GF 15 is a 15% glass fiber reinforced polyamide 6 compound.It can be processed using injection molding.

Tarnamid® T- 27 MT 30 is a 30% mineral filled polyamide 6 compound, heat stabilized.

Tarnamid® T-27 GF25M is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-080, GF25Z