Products in Ready-to-Use Products: Polyureas

Arma 103 is a low VOC aliphatic topcoat available to meet VOC regulations in specific areas. It is used in combination with Arma 101. It is used as a UV resistant topcoat for any of the Arma polyurea coatings, predominantly for RV roofs.

Arma 901-90AS (800% Elongation) is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

Arma 400 is two-component 100% solid cast urethane elastomer is recommended for high temperature applications where thermal stability is required. Often used for dump-truck beds, this product provides a hard, glossy surface necessary for smooth movement of cargo during tilt unloading.

ARMA 100 APU is a two component, polyurethane/polyurea elastomer system used for bedliners. This product provides a flexible but extremely tough monolithic membrane with excellent water and chemical resistance with a vast variety of other applications.

Arma 60A polyurea/polyurethane hybrid is waterproof, soft and rubber-like. It is skid-resistant and provides an extremely tough monolithic membrane for flexible surfaces. This product exhibits excellent abrasion and chemical resistance and contains no VOCs.

POLYSHIELD HT™ 100F is a fast-set, high performance, spray-applied, plural component, pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and prepolymers. It provides a cost effective flexible, tough, resilient monolithic membrane with water and chemical resistance.

Marvel Industrial MarvelShield M395 Potable Water is the NSF 61 Certified version of the M395 formulation. The NSF 61 Certification confirms the product has been tested, approved, and qualifies for use on POTABLE WATER applications.

Ply-Guard UR (Fast Set) is a fast set, fast gel time spray-applied, two-component Polyurea coating that is 100% solids and contains 0 VOCs.

Marvel Industrial ProtecT2 is a solvent-based clear topcoat that bonds well on top of our Marvel Hybrid & 100% Polyureas to provide protection against harsh environments. Demonstrating excellent abrasion, scratch, and UV resistance, our Marvel ProtecT2 is the perfect compliment for added protection.

Stobicoat® U 841 is a two-component UV stable polyurea elastomer coating designed for applications where resistance to chemicals or prolonged weathering is needed.

Marvel Industrial MarvelCoat Premium (M91) provides ultimate versatility. With some of the highest POLYUREA content in the industry, this product is a great option for multiple applications. Providing just the right blend of high physical properties such as hardness, tensile & tear strength, along with increased elongation, this product will provide a long-term coatings solution. Super quick dry time combined with a 24-Hour cure time makes it practical for increasing the efficiency.

HARD CAP™ 100 spray-applied, plural-component, 100% pure polyurea is an ideal choice when a durable high buildcoating for interior and exterior applications with excellent color stability and gloss retention is required. HARD CAP™100 provides a flexible, resilient, tough, monolithic membrane with good water and chemical resistance.

Arma 901-50DS is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

EPL™ 9 is a 100% pure, slow set, self-leveling elastomer.

CTM Coatings UCT-PU polyurea primer is a two-component, 95% solid, VOC compliant, polyurea hybrid that was developed as a primer/basecoat for a variety of coating systems. It provides outstanding adhesion on many substrates and performs well in a wide range of temperature conditions. This system has been approved by the Canadian Food Inspection Agency (CFIA).

UREA-TUFF 4260 is a two-component, liquid-applied hybrid polyurea elastomer designed for use as a mix-in-the-bucket, but yet rapid-curing, monolithic waterproofing membrane. is a solvent-free aromatic polyurea-polyurethane elastomer containing no tar or asphaltic extenders.

Elba Lubrication Elbalubes EM 2 is a premium quality lubricant utilizing a Polyurea thickener system compounded with high quality base stocks to provide excellent protection for electric motor bearings. It is characterized by its state-of-the-art additive technology providing exceptional rust control and oxidation resistance. It's mechanical and shear stability and temperature range durability promote optimal performance under continuous operation. It is designed and tailored specifically for use in electric motor bearings, all types of rolling element bearings and various industrial applications. Always consult with OEM (Original Equipment Manufacturer) for appropriate lubricant viscosity and quality selection.

Perdure P72 is a new generation fast-curing, two-component, poly aspartic aliphatic polyurea formulated to be used as a sealer or topcoat for interior or exterior use over properly prepared concrete or resinous flooring systems. Perdure P72 has excellent penetration and bond strength to properly prepared surfaces, UV resistant, abrasion, impact and wear-resistant.

Elba Lubrication Elba PolySyn 2 is Synthetic Polyurea grease designed for use in rolling bearings operating under extreme temperature. The organic Polyurea thickener system contains no metals ions which act as catalyst for oxidation. It is particularly beneficial for the long term lubrication of rolling and ball bearings in electric motors, fans and air conditioned. Elba PolySyn 2 is a ideal lubricating grease for electric motors bearings designed to be lubricated for life.

POLY HYBRID (CLEAR) is a two-component poly aspartic-polyurea clear coat providing a high-gloss finish. This product combines extreme chemical, abrasion and UV resistance with fast-cure properties. Clear Poly Hybrid is ideal for exterior or rapid turnaround installations in temperatures as low as 20˚F

AMP™ 100 spray-applied, plural-component 100% pure polyurea is a unique synergy of aliphatic and aromatic polymer chemistry. AMP™ 100 pure polyurea is formulated using amine terminated polyether resins, amine chain extenders, and aliphatic and aromatic prepolymers. For many applications this highly cross-linked elastomer offers an economical alternative to pure aliphatic protective coatings. AMP™ 100 can be used as a stand-alone product or as a topcoat over aromatic polyureas, polyurethanes, or hybrids.

Arma 901-70DS is a two-component, polyurea elastomer spray system that can be applied under harsh environmental conditions. These products are non-hydrophobic with excellent chemical and abrasion resistance, providing excellent elongation.

POLYQuik® HPU-1229 is a two-component, aromatic, sprayable, hybrid polyurea elastomeric coating. It is used as an elastic waterproof protective coating for construction and industrial applications. It is specifically formulated for applications where fire retardancy is required. POLYQuik® HPU-1229 passes ASTM E84 Class A requirements for flame spread and smoke index, and has been tested according to other fire standards.

Polybred 3000 is a aromatic polyurethane/polyurea hybrid system, 100% solids, 2 components, with rapid curing speed, applied by spraying, used to protect polyurethane foam in cold rooms, leaving a smooth, elastic and washable surface.

LOPH II (CLEAR) is two-component low-odor poly aspartic-polyurea clear. This low viscosity, zero solvent, easy to handle product combines extreme chemical, abrasion and UV-resistance with fast-cure properties. The product is ideal for exterior or rapid turnaround installations in temperatures as low as 20˚F.

Marvel Industrial MarvelFlex is UV Stable, 100% Pure Polyurea aliphatic product is ideal for single application colorfastness combined with an extremely durable coatings product. Whites stay white, and colors stay true longer with this product.

POLYQuik® HPU-1653 is a two-component, aromatic, elastomeric coating with exceptional abrasion and slip resistant properties. It cures quickly and it has excellent adhesion to wood, concrete, geotextile, and steel. POLYQuik® HPU-1653 can be applied under a wide range of climate conditions to form a very durable coating for ramps and various waterproofing applications.

WearMaster® KG 455 is a polyurea-based high-temperature lubricant.KG 455 uses low-sulfur base oils to prolong the performance life of elastomeric and metal components. The excellent EP performance is obtained without the use of corrosive-type additives often found in lithium-complex greases. For long life performance, KG 455 is recommended for service up to 350 °F (177 °C) with extremely low oil separation.

Onyx Concrete Coatings Polyaspartic 100 is a two component, high performance aliphatic polyaspartic finish floor coating. It is 100% solids and 0-V.O.C. The absence of solvents and almost no odor allows it to be applied in occupied areas. Polyaspartic 100 provides a high gloss finish and is the product of choice for a high build interior/ exterior top coat. It is designed to be applied at 5-20 mils (DFT). For durability, stain resistance, and a finish coat which beautifies concrete for years, Polyaspartic 100 is simply unmatched. It is also formulated to be used with virtually all other Onyx base systems.

CHEM-THANE DCP RR is a fast curing, two component aliphatic polyaspartic polyurea topcoat. It has superior color and gloss retention and meets or exceeds SSPC Paint Specifications 36, 38 and 39 Level 3 weathering performance requirements.

Polylast 2000 is 100% Polyurea 2-component system, excellent physical properties, fast curing speed at room temperature, solvent-free, applied by spray. Waterproof material, with excellent chemical resistance and great durability. Material evaluated under the ANSI/NSI 61-5 Standard, to be used as a coating for drinking water tanks.

POLYSHIELD HT™ SLOW FC is a state-of-the-art, high- performance, sprayed, plural-component, pure polyurea elastomer,that is compliant with FDA 21 CFR 175 300 (c)/ (d) high temperature, heat-sterilized, non-acid aqueous food contact.This system is based on amine-terminated polyether resins, amine chain extenders and prepolymers. It provides aflexible, tough, resilient monolithic membrane with water and chemical resistance.

CTM Coatings PACT-9500 is a two-component, 95% solids, VOC compliant, polyaspartic coating that was developed as a low odor topcoat. The product contains a UV protector. It provides a glossy finish with superior chemical resistance. It exhibits excellent physical properties. This system has been approved by the Canadian Food Inspection Agency (CFIA).

K5™ HI TEMP is an ultra high-strength, high-elongation polyurea, originally developed as a resilient blast resistant polymer. Soon after, it was discovered that K5™ is exceptionally resistant to abrasion, compared to other spray applied coatings. K5™ HI TEMP can be sprayed on to virtually any surface configuration, at any thickness. Therefore, it can be selectively applied to high wear areas.

POLYQuik® P-700 is a two-component, aromatic, sprayable pure polyurea elastomeric coating. It is used as a highly elastic, waterproof protective coating for both vertical and horizontal surfaces. It is specially formulated for excellent overcoat adhesion to geotextiles and old coatings with minimal surface preparation. Use POLYQuik® P-700 where regular dynamic movement is expected. POLYQuik® P-700 can receive a broadcast of aggregate for slip resistance on horizontal surfaces.

Arma 120 is a two-component, 100% solids polyurethane elastomer. It is equally effective under dry abrasive and/or corrosive environments. This product is potable water coating certified.