Products in Ready-to-Use Products: Gears

Synthetic EP 220 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 220 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Athena 15 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Vanishing Oil 6370 is designed for light and medium duty blanking, stamping, very shallow draws and fin forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface. Vanishing Oil 6370 is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

Hercules EP 0 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 0 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Athena 46 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Athena 68 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

Olympus 68 is a anti-wear hydraulic oils formulated with polyalphaolephin synthetic oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics. It is formulated to provide outstanding low- and high-temperature performance and equipment protection up to three times longer than comparable conventional products.

Vulgrind 7410 is a chlorine-free high performance grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7410 to provide a consistent level of grinding performance as well as ensuring excellent wetting, lubrication and cooling.

Athena 220 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

J-CUT 450 is a heavily additized, high performance oil developed for use in difficult machining operations such as helical broaching. J-CUT 450 contains an oiliness additive for additional performance, especially on draggy, soft metals.

Pandora 22, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.

Hercules EP 8A is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 8A offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Poseidon 220 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Hercules EP 4 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 4 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Palm Labs Adhesives Bearing and Shaft - Series 17 - HT is a fast curing, high temperature, high strength, high viscosity, press fit, anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to high heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Synthetic EP 320 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 320 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

Hercules EP 5 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 5 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Pandora 2, formulated from select high-quality, low viscosity base oils and additives imparting excellent resistance to oxidation and corrosion, were developed specifically for the lubrication of high-speed and precision machine tool spindle bearings. They can also be used in some critical low pressure hydraulic and circulation systems where the appropriate viscosity grade is selected.

PROGILINE® Gear 1000 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

Poseidon 68 is a of rust and oxidation inhibited oils formulated with highly refined paraffinic base oils. It provides excellent oxidation and corrosion inhibition as well as foam and aeration suppression. It has excellent demulsibility characteristics.

Athena 22 is a anti-wear hydraulic oils formulated with highly refined paraffinic base oils. It provides excellent anti-wear protection, oxidation and corrosion inhibition as well as foam and aeration suppression. It have excellent demulsibility characteristics.

J-Cut 9187 was specifically developed for Swiss type high performance screw machines. The low viscosity of J-Cut 9187 allows it to effectively penetrate between the tool and work piece interface providing excellent surface finishes and tool life. This product is extremely high performance and is easily capable of performing gun drilling and form tapping on stainless as well as carbon steel.

PROGILINE® Gear 220 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

Vulgrind 7810B is a high performance precision grinding oil based on specially selected, thermally stable base oils. This allows Vulgrind 7810B to provide a consistent level of grinding performance as well as guaranteeing excellent wetting, lubrication and cooling.

Cutrite 3900 is a micro emulsion fluid engineered for machining and grinding a wide variety of metals including cast iron, steel, stainless steel and most aluminum alloys. It is ideally suited for manufacturing plants desiring a single fluid to perform well on a variety of metals and operations. The use of innovative technology allows Cutrite 3900 to provide excellent sump life while the reliable, low maintenance qualities make it an ideal choice for individual sumps and central systems applications.

Palm Labs Adhesives Bearing and Shaft - Series 17 - OR is a fast curing, high strength, oil resistant, close fit, anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Palm Labs Adhesives Bearing and Shaft - Series 17 - HS is a fast curing, high strength anaerobic retaining compound for bonding, sealing and retaining of cylindrical parts. It is highly resistance to heat, vibrations, water, gasses, oils, hydrocarbons and many chemicals.

Kixx Circulating is a circulating oil formulated from high quality base stocks and a carefully balanced additive system. This provides excellent protection against wear for long bearing and gear life.

GHO-5555 is medium viscosity high performance shaving and hobbing oil. GHO-5555 contains an oiliness additive for additional performance, especially on draggy, soft metals. It is designed primarily for gear hobbing, form grinding, and gear cutting where pressurized coolant systems are used.

PROGILINE® Gear 68 PG is a range of polyalkylene glycol based synthetic extreme pressure gear lubricants, providing high levels of load carrying capacity and wear protection. The range is designed to enable continuous operation at high temperature, with minimized friction and good thermal / oxidative stability properties. PROGILINE® Gear PG lubricants allow thermally stable operation at temperatures exceeding 200°C, and offer anticipated service lifetimes of all grades in excess of 10,000 hours at 100°C, enabling extended service intervals and in some instances a fill-for-life lubricant.

Kixx Gear EP S is PAO based advanced synthetic heavy duty industrial gear oil. It offers outstanding lubrication under severe operating conditions, help reducing friction and provides longer service life. High resistance to micro-pitting for optimal gear protection.

Synthetic EP 150 of synthetic industrial EP gear lubricants is specifically formulated to protect moderate to heavily loaded industrial gears and bearings. It provide excellent anti-wear and load carrying capability as well as strong rust inhibition and demulsibility performance. Synthetic EP 150 meets or exceeds the requirements of the industry standard U.S. Steel 224 and AGMA 250.04 EP gear lubricant specifications.

J-Cut MO-240-EP is a heavy duty lubricant formulated for the machining and sawing of ferrous and non-ferrous metals. The high film strength of J-Cut MO-240-EP in conjunction with non-chlorinated extreme pressure additives, provides excellent performance on difficult to machine alloys such as stainless steel and exotic alloys. Based on renewable resources, J-Cut MO-240-EP is biodegradable and essentially non-toxic.

Hercules EP 8 is an extreme pressure industrial gear oil fulfills the requirements of DIN 51517-3 for CLP type gear oils and U.S. Steel 224 performance. Hercules EP 8 offers good wear protection, safety against scuffing, aging resistance and a high thermal endurance. In addition, the product behave neutral towards conventional seals and bearing metals.

Vanishing Oil is designed for light duty blanking, stamping, very shallow draws and fine forming. The light oily film evaporates in 10 to 20 minutes, depending on the environment, leaving a clean surface with virtually no residue. Vanishing oil is compatible with all metals including aluminum, copper, stainless steel, brass, mild steel (1010, 1008) and silicone steel alloys.

FBO 67LG is a heavy duty oil developed for fine blanking heavy gage steel and stainless steel alloys. The combination of boundary lubrication and extreme pressure additives extends die life and provides excellent surface finishes even in the most demanding operations. The low density of FBO 67LG allows it to work well with oil/water separators that are connected washer systems. The product is easily removed with alkaline and mildly alkaline cleaners