Products in Binders & Disintegrants

Neusilin® S1 is a synthetic, amorphous form of magnesium aluminometasilicate. It is a multifunctional excipient that can be used in both direct compression and wet granulation of solid dosage forms. Neusilin® is widely used for improvement of the quality of tablets, powder, granules and capsules. Neusilin® does not develop gel with aqueous solutions unlike other magnesium aluminum silicates. The different grades of Neusilin® have been highly evaluated at home and abroad. It has a market presence of over 60 years in Japan.

Willy Benecke Gum tragacanth is a natural resin secreted by plants of the genus Astragalus such as a gummifer.

Huangshan Bonsun Pharmaceuticals Polyvinylpyrrolidone K15 is a White or milky white hygroscopic powder; colorless, non-toxic, non-irritating; -easily soluble in water and a variety of organic solvents, insoluble in acetone, ether; with excellent solubility, film-forming properties, physiological compatibility, Chemical stability and adhesion.

Glycerine USP-30 is used in Pharmaceuticals Applications.

Jungbunzlauer Suisse AG Citric acid S40 is a very fine pulverized powder, blended with a slight amount of anti-caking agent silicon dioxide (SiO2), which displays a high ability to absorb spurs of humidity.

PolyStardone® XL-10 is unsurpassed in its performance and versatility as a super disintegrant in formulations. It enables dissolution of the bio-active components as a prerequisite for achieving the desired and required bioavailability. PolyStardone® has good compressibility and fluidity, which can be applied to wet granulation, dry granulation and direct compression technologyAs a super disintegretant, it will not form gel and can effectively improve the disintegration time.

Jungbunzlauer Suisse AG Citric Acid Anhydrous is supplied in accordance with the current requirements of the European Pharmacopeia (Ph. Eur), the United States Pharmacopeia (USP), the Food Chemicals Codex (FCC), and the Commission Regulation (EU) No. 231/2012.Citric acid is the most widely used organic acid and pH-control agent in foods, beverages, pharmaceuticals and technical applications. Citric acid anhydrous occurs as colorless crystals or as white, crystalline powder with a strongly acidic taste. It is very soluble in water, freely soluble in ethanol (96 %) and sparingly soluble in ether. Citric acid anhydrous is non-toxic and has a low reactivity. It is chemically stable if stored at ambient temperatures.Citric acid anhydrous is fully biodegradable and can be disposed of with regular waste or sewage.

PolyStardone® XL is unsurpassed in its performance and versatility as a super disintegrant in formulations. It enables dissolution of the bio-active components as a prerequisite for achieving the desired and required bioavailability. PolyStardone® has good compressibility and fluidity, which can be applied to wet granulation, dry granulation and direct compression technologyAs a super disintegretant, it will not form gel and can effectively improve the disintegration time.

Golden-Shell Pharmaceutical SPECIAL MOLECULAR WEIGHT CHITOSAN is a non-toxic and odorless.It is a off-white or slight yellow powder. Soluble in acid,and insoluble in water,base or normal organic solutions.

Jungbunzlauer Suisse AG Tricalcium Citrate (TCC) meets the requirements of the US Pharmacopeia (USP), the Food Chemicals Codex (FCC), and the Commission Regulation (EU) No. 231/2012 always in their latest versions. In some countries such as USA, tricalcium citrate is simply denominated calcium citrate. It is produced by complete neutralization of citric acid with a high purity calcium source such as calcium hydroxide or calcium carbonate. With its high calcium content of 21%, tricalcium citrate is the most economic calcium salt among the commonly used organic calcium salts. Tricalcium citrate is supplied as a white, odorless, crystalline powder or fine powder. It is slightly soluble in water and freely soluble in diluted hydrochloric acid. In contrary to other salts, tricalcium citrate is better soluble at lower temperatures (so-called "inverse solubility"). It is practically insoluble in alcohol. During heat treatment, it is less reactive than other calcium salts due to its inverse solubility. With regard to its significantly better bioavailability, tricalcium citrate is preferred over inorganic calcium sources such as calcium carbonate or calcium phosphate.

Acrycoat® E100 is transparent or colored film former coating polymers based on methacrylic acid co-polymers type A, B & C which confirms to USP/NF, EP & JP specification. Acrycoat E100 is useful for film coating, enteric coating, moisture barrier coating, sustained release coating and matrix forming, taste masking of bitter drugs, binder for powders, transdermal therapeutic system etc.

Lambda carrageenan that although does not gel but can be used to thicken dairy products. In aqueous systems it can act as a suspending and emulsifying stabilizer, thickener, binder and gelling agent.

Lactose-G (Lactose Fine Granulated) is a mixed granule of Lactose Hydrate(JP) and Hydroxypropylcellulose(JP), which complies with *JPE (Japanese Pharmaceutical Excipients). used for filler for direct compression.

Kappa Carrageenan that forms strong, rigid gels in the presence of potassium ions, and reacts with dairy proteins. It is sourced mainly from Kappaphycus alvarezii or Euchema Cottoni sea weeds.

Comprecel® SMCC 50 is an integrated particle combined with 98% Microcrystalline Cellulose and 2% colloidal silicon dioxide. By co-processing technology, colloidal silicon dioxide is uniformly distributed on surface of MCC particle. Comprecel® SMCC is a highly functional ingredient that solve complex formulation problems and simplify manufacturing process.

KoVidone® K17 are an essential ingredient to formulating highly effective pharmaceutical products. The polymers are produced in a state of the art manufacturing facility operating under full cGMP compliance. In addition, all physical handling and packaging of powders is conducted in class-D clean rooms with specific attention placed on reducing the risk of any potential particulate/foreign matter contamination. KoVidone® K series products possess excellent binding, film-forming, dispersing and thickening properties and are widely used.

Shanghai Qifuqing Material Technology PVPP-F is a cross-linked polymer that is polymerized from vinyl pyrrolidone monomer under specific conditions and is insoluble in water, strong acids, strong bases and general organic solvents.

Fujicalin® is a dibasic calcium phosphate anhydrous designed to function as a direct compression excipient. It has exceptional flow and compression characteristics, while maintaining the ability for rapid disintegration. The key to Fujicalin®’s superior performance is the highly specialized and proprietary manufacturing process that yields a unique primary particle.

Jiaozuo Zhongwei Special Products Pharmaceutical Pharmaceutical PVPP (Crospovidone Type A) is hygroscopic, insoluble in water and all other common solvents, but it swells rapidly in aqueous solution without any gel forms.

Sidley Chemical COA-LH 21 is a disintegrant and adhesive to tablet by wet granulation.

Stardone® K30 is a classic wet binder with optimal balance between adhesive strength and ease of handing. It is the ideal binder in all wet granulation processes by any of the methods like wet addition as granulation solution(binder + solvent), Dry addition as Dry mixture of API and binder, Solvent is added to the dry mix, Combination with Some binder is mixed with the API, and the rest is dissolved in the granulation solution with the preferred choice if the amount of solvent is restricted.

Willy Benecke Gum xanthan gum is a polysaccharide produced by the bacteria Xanthomonas campestris.

Sarda Gums and Chemicals GLUKOM T30 is high viscosity Konjac Gum. Mainly Used in Bakery products, Beverages, Carbonated beverages, Concentrates and ades, Confectionary, Desserts, Dough conditioners, Edible films, fiber drinks, Formed foods, Frozen foods, Glazes, Gravies, Ice cream, Jellies, Meat, Meat products, Non-dairy creamers, Noodles, Pasta, Pudding, Cream, Yogurt.

Sidley Chemical COA-LH 22 is a normal disinterating property, used while no need of strong cohesive force.

Refined Glycerine I P is used in Pharmaceuticals Applications.

SSB® DIVIDE CW FL is a light colored carnauba wax in flake form. It is a hard wax with a high melting point and a fine microcrystalline structure. It is compatible with nearly all natural and synthetic waxes and miscible in a molten state. It is used as a polishing agent for hard coated dragees, for tablets, sweets or dried fruits and vegetables as well as a separating agent for sweets and fine bakeries. It is further used for the consistency in chewing gums and as a fruit coating agent. As a pharmaceutical excipient it is used as a glazing agent especially for an easier swallowing of the tablets. For pharmaceutical dosage forms with a special release profile it is used as a hydrophobic binder, often in combination with other hydrophobic and hydrophilic binders. In ointments and lotions it is used to give the required consistency, in suppositories for hardness and to adjust the needed melting point.

KoVidone® K12 are an essential ingredient to formulating highly effective pharmaceutical products. The polymers are produced in a state of the art manufacturing facility operating under full cGMP compliance. In addition, all physical handling and packaging of powders is conducted in class-D clean rooms with specific attention placed on reducing the risk of any potential particulate/foreign matter contamination. KoVidone® K series products possess excellent binding, film-forming, dispersing and thickening properties and are widely used.

KoVidone® K25 are an essential ingredient to formulating highly effective pharmaceutical products. The polymers are produced in a state of the art manufacturing facility operating under full cGMP compliance. In addition, all physical handling and packaging of powders is conducted in class-D clean rooms with specific attention placed on reducing the risk of any potential particulate/foreign matter contamination. KoVidone® K series products possess excellent binding, film-forming, dispersing and thickening properties and are widely used.

F-Melt® Type C is a proprietary co-spray dried excipient launched by Fuji in 2005. F-MELT® is designed not only for manufacturing orally disintegrating tablets (ODTs) and tablets that dissolve fast in the oral cavity without the need of water, but is also an excellent excipient for soft chewable tablets. It is suitable for manufacturing directly compressible ODTs simply by blending with active pharmaceutical ingredients (APIs) and lubricants. F-MELT® Type C is mainly used for pharmaceutical and nutraceutical applications.

Shandong Yulong Cellulose Technology Croscarmellose sodium (CCNa) is a cross-linked, partially carboxymethyl cellulose sodium salt, with a white or off-white appearance powder. CCNa is hygroscopic and swells in water to form a suspension..

Sarda Gums and Chemicals Aquacol grade CMC is range of Sodium carboxymethyl cellulose (NaCMC) are made with highly optimized conditions to convert cellulose in soluble polymers. Often they are considered as most effective water binders for use in food and non-food applications. Benefits of using Aquacol grades go far beyond being a cost-effective solution. High water-solubility and high water biding capacity help impart a number of property enhancements that bring high stability of texture etc. Not just that, they also provide food grade adhesion to enable creative food applications beside non-food types.

POLYOX™ WSR Coagulant (Schick) is a versatile product with various applications in different industries. It functions as a film former, binder, and foam stabilizer, offering benefits like dense foam and excellent wet tack. This off-white to white powder is compatible with a wide range of polymers and resins, making it suitable for diverse formulations. Its features include water solubility, crosslinkability, and a high molecular weight. POLYOX™ WSR Coagulant (Schick) is available for your manufacturing needs, whether in the agrochemical, cosmetic, food, industrial, or pharmaceutical sectors.

Sentry™ Polyox™ WSR - N750 NF Grade is available in various dosage forms including gels, osmotic pump tablets, and traditional tablets. Utilizing direct compression manufacturing technology, it serves applications in both oral and topical drug delivery within the healthcare and pharmaceutical markets. With its properties as a binder and thickener, this white, water-soluble powder aids in formulation processes.

Sentry™ Polyox™ WSR - N60K NF an off-white powder, offers versatile applications. Its industrial additives function as binders and thickeners, aiding in direct compression manufacturing. In pharmaceuticals, it acts as a binder and controlled release agent. Soluble in water, it suits abuse deterrent tablets & capsules, gels, and osmotic pump tablets.

Sentry™ Polyox™ WSR N 80NF TG LEO, in an off-white powder form, serves as a binder and thickener in cleaning and pharmaceutical formulations. Its water solubility makes it suitable for various applications, while its direct compression manufacturing technology ensures efficient production processes. Additionally, it functions as a controlled release agent, adding value to pharmaceutical formulations.

Avicel® PH - 113 composed of microcrystalline cellulose, finds application in tablet formulations. Manufactured using direct compression, dry granulation, and wet granulation techniques, it serves as a binder and compression aid. Derived from non-animal sources, it meets pharmaceutical and nutraceutical standards.