Products in Textile & Leather Chemicals: Leather

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

MultiTech MultiFunctional I is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts MultiTech MultiFunctional I and 1 partMultiTech MultiFunctional I to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

MultiTech Surfactant Ais a REACH-registered; TSCA-pending sophorolipid biosurfactant (INCI: glycolipid) that can be tailored for use in a variety of industrial applications, by acting as a dispersant, emulsifier, wetting agent and more. MultiTech Surfactant A attributes:Low HLBLow/no foamingHydrophobicExcellent emulsifier MultiTech Surfactant A biosurfactants:USDA certified 100% biobasedReadily biodegradableNo prop 65 issues & no 1,4-dioxane Non-GMO & palm oil freeLow carbon footprint

DiTech Multifunctional C is an economical form of reactive sulfur that is typically a light-yellow colored solution with the accompanying odor of rotten eggs. Hydrogen Sulfide (H‚‚S), a toxic gas, is evolved upon contact of Sodium Hydrosulfide with acids.

DiTech Fire Suppressant is a research-tested and field-proven source of readily-available sulfate sulfur and loss-resistant ammonium nitrogen.

Product Attributes:Low shrinkage : <2% (180⁰C, 30 minutes),Better dimensional stability.Higher yield in downstream processSpecial Name: Recron® Fiberfill Low-shrinkDenier Range: 3Cut Length: 51, 64,76Speciality: Siliconised/ Non-Siliconised

Product Attributes: An alternative to Down/Feather Minimum cohesiveness Flows seamlessly to every corner like air, Superior wash durability, Odorless and non-allergic Premium feel   Special Name: Recron® Aerofill 'Light as Air'   Denier Range: Micro 1.5, 4, 7   Cut Length: 18, 22, 24, 32   Speciality: Siliconised

Product Attributes:Designed to retain body heat. HEXaREL based products enhances 10-30% TOG/Clo Value than regular products.Thermoregulation: Conducts heat very efficiently; performance measured in Qmax rating 0.1 (w/cm2).Neutralises bacteria, ensuring control of malodorProtects from virus and fungiExhibits fabulous Anti-Static propertiesEnhances Mosquito repellencyMade from Pre-Consumer wasteGRS and OEKO-Tex CertifiedSpecial Names: HEXaREL FiberfillDenier Range: 1.8, 3, 6, 15Speciality: Hollow/Solid

Product Attributes:Low shrinkage: <2% (180⁰C, 30 minutes),Better dimensional stability.Higher yield in downstream processSpecial Name: Recron®Fiberfill Low-shrinkDenier Range: 3Cut Length: 51, 64,76Speciality: Siliconised / Non-Siliconised

Product Attributes:Multi-Products range serves all non-woven requirementsHigh Strength to achieve best durabilityOptimum finish for best Needle weavibilitySpecial Name: Recron® Non-woven SolutionsDenier Range: 1.5, 1.8, 2.2, 3.0, 4.0, 6.0Speciality: Non-Siliconised/ Slick

BIO-SOFT® N91-2.5 is a c9-11 linear alcohol ethoxylate featuring a low hlb. This versatile product offers rapid wetting, low foam, emulsification, and detergency. Its applications span laundry, textiles, hard surface cleaning, machine-based cleaning, paints, carpet cleaning, and institutional and industrial cleaning contexts.

STEPANTEX® DA-6 is a highly active nonionic surfactant that provides emulsification, moderate foam, detergency, and excellent wetting. This product finds application in laundry, textiles, hard surface cleaning, paints, carpet cleaning, hand dishwashing, and institutional and industrial cleaning applications. The product is kosher-certified.

STEPANTEX® VL 90 A stands as a diester fabric softener quaternary, delivering excellent softening, antistatic, and rewetting properties. This cationic surfactant paste is applicable in household and industrial cleaners and finds a diverse range of applications, including metal cleaning and polishing compounds, cutting oils, textile auxiliaries, leather conditioners, water repellents, shoe polishes, emulsifiers, paper treatment, and clays.

STEPANTEX® VM 85 G is a cationic surfactant suited for the formulation of household and industrial fabric softeners from 3% viscous to 20% fluid-active concentrations. This ester quat can also be used in many other applications, such as metal cleaning and polishing compounds, cutting oils, textile auxiliaries, leather conditioners, water repellents, shoe polishes, emulsifiers, paper treatment, and clays.

BIO-SOFT® N91-6 is a c9-11 linear alcohol ethoxylate with a low pour point and high hlb, excelling in fast wetting, moderate foam, emulsification, and detergency. Applications include laundry detergents, textiles, hard surface cleaning, paints, and institutional and industrial cleaning. It satisfies the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

ZELEC® A130 can be used as a wetting agent in the paint and coating industries. In this application, it could also contribute to the improvement of corrosion resistance, gloss, color acceptance, wet scrub resistance, and the hiding power of the film. It can also be used as an antistatic agent in textile and leather finishing and processing and in rubber, plastic, and composite processing. It can also act as an emulsifier and corrosion inhibitor in metalworking fluid, printing pressrooms, and oil fields. It can also be used as a demolding agent in a construction area and in rubber, plastic, or composite processing. It also has lubrication properties for metalworking fluids and textile and leather finishing and processing, including extreme-pressure and anti-wear properties.

MAKON® DA-6 is a high-active nonionic surfactant that excels in emulsification, moderate foam generation, detergency, and excellent wetting properties. It has a broad spectrum of applications, including laundry, textiles, hard surface cleaning, paints, carpet cleaning, hand dishwashing, and institutional and industrial cleaning formulations. Importantly, makon da-6 aligns with the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

WACKER® L 053 is a polyether-functional polydimethylsiloxane that is completely water-soluble. WACKER® L 053 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 053 exhibits both special lubricant properties and antistatic action.

WETSOFT® NE 430 is a nonionic macroemulsion concentrate of a self-dispersing hydrophilic silicone fluid. It is used for the hydrophilic treatment of fibers and textiles of all kinds. On hydrophilic substrates such as cellulosics, the hydrophilic properties are usually not affected, while hydrophobic substrates such as polyesters typically experience a clear improvement in wetting properties.

T-Soft® AOS-40 is Alfa Olefin Sulfonate Liquid based on thin film continuous sulfonation of high purity C14 olefins, neutralized with sodium ion. It finds use in hair shampoos, toilet bar, detergents and other household cleaners. It is alsoused in textile, leather and agro-chemicalindustry.

Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather fin

Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed pr

H-Sil® EM 1060 is a 60% active, nonionic emulsion of 10,000 cSt polydimethylsiloxane. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is effective as a release agent for rubber, plastic, and shell metals in foundry applications. This product has additional applications in leather care, textiles, surface lubrication, surface protection, and gloss improvement.

BioPTMG 2000 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 2000 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

BioPTMG 650 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 650 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

BioPTMG 1000 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 1000 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

BioPTMG 3000 is introduced by Mitsubishi Chemical Corporation, a new environmentally friendly product that is manufactured from plant-derived raw materials and contributes to help prevent global warming. BioPTMG 3000 was compared with of quality of our conventional PTMG offers: Reduces CO2 emission by approximately 40% compared to conventional products Highest standards of quality

WACKER® Finish WR 1200 is a reactive aminoethyl-aminopropyl-functional polydimethylsiloxane that imparts a very soft, drapable, and elastic touch to woven and knitted fabrics. It is widely regarded as the best softening agent for PES and other synthetic fibers. In addition to softness, WACKER® Finish WR 1200 also enhances the wash-and-wear properties, crease recovery angle, sewability, tear strength, and abrasion loss of the treated fabrics. These effects are quickly noticeable, even after washing and dry cleaning processes.

ADVALON® CF 3295 is a macroemulsion finish for "PAN" carbon fiber precursors with approximately 20% solids content. It is formulated using proprietary silicone technology. The purpose of ADVALON® CF 3295 is to provide excellent wetting and penetration, ensuring uniform lubrication between fibers and metal during fiber processing. It also prevents the fusion of fibers. Additionally, the active substance in ADVALON® CF 3295 acts as an antistatic agent due to its inherent conductivity.

ADVALON® CI 40 is a nonionic semi-microemulsion of a reactive polysiloxane. It is specifically formulated as a fabric softener for polyester materials, providing a soft and pleasant feel. Additionally, it enhances the intensity of dark color shades in the fabric.

WETSOFT® AE 200 is a modified aminofunctional polydimethylsiloxane used for non-yellowing, hydrophilic textile finishing. It is an excellent active ingredient in hydrophilic softeners for finishing all kinds of fibers and textiles. WETSOFT® AE 200 provides woven and knitwear, particularly nonwovens and terry, with a soft and supple hand.

WACKER® Finish WR 1300 is a reactive aminoethyl-aminopropyl functional polydimethylsiloxane. When used in a softener formulation, it has minimal impact on the degree of whiteness. Additionally, it does not adversely affect the shade or color-fastness properties of colored goods. In formulations for fill fiber finish applications, WACKER® Finish WR 1300 provides excellent slickness and resilience to the fibers.

WETSOFT® CTA is a self-dispersible aminofunctional silicone fluid with polyether groups. It can be applied alone in diluted form or blended with organic softeners to impart hydrophilic properties to fibers and textiles. However, a compatibility test is recommended before mixing with organic softeners.

JETSOFT® Concentrate is a self-dispersing aminofunctional silicone fluid that can be diluted with water. It is specifically designed to be used as an active substance in softener formulations for the impregnation of fibers and textiles. By using JETSOFT® Concentrate, woven and knitted fabrics gain a characteristic, soft, and natural hand with low surface smoothness.

WACKER® Finish WR 301 is a reactive aminoethyl-aminopropyl-functional polydimethylsiloxane that provides a soft, drapable, and elastic touch to woven and knitted fabrics. It enhances wash-and-wear properties, crease recovery angle, sewability, tear strength, and reduces abrasion loss. These effects are quickly noticeable after washing and dry cleaning.