Products in Oilfield & Transport Chemicals: Water Soluble

T-Soft® L60 is an anionic detergent that exhibits excellent emulsification, wetting, and foaming properties. It is used in a wide variety of industrial markets; oil and gas, HI and I, construction, and textiles.

Antifoam GN™ 11P is a 100% high-performance and general-purpose antifoam that provides an efficient and economical means of preventing costly and dangerous foam in many systems. This product is stable in both highly acidic and highly alkaline systems.

Petrolaid™ RDX is a low pH organic salt designed to replace traditional acids like hydrochloric, citric, phosphoric, formic, and sulfuric acids. It releases hydrogen ions on demand to dissolve calcium scale and iron oxide, offering a cost-effective and high-performance alternative. It is DOT non-regulated, non-fuming, non-corrosive to most metals, phosphate-free, and low in BOD/COD contribution.

Celect® HPD CMC is a purified low viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. This versatile additive is essential in froth flotation processes, where it effectively disperses and depresses gangue minerals over a wide range of dosages. It functions as a water-soluble polymer, dissolving readily in both cold and warm water, ensuring ease of use in various operational conditions. Celect® HPD CMC enhances the efficiency of mineral separation by aiding in the selective flotation of valuable minerals while minimizing the recovery of undesired components. Its reliable performance makes it a preferred choice in mineral processing applications, contributing to improved productivity and resource utilization in the mining industry.

Celect® CRD CMC is a purified low viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It serves as a flotation depressant specifically designed for chromite reduction in the processing of platinum group metals (PGM), copper/nickel sulfides, gold, and base metal sulfides. This specialized additive effectively aids in separating valuable minerals by reducing the floatability of chromite, thereby optimizing the recovery process in mining and mineral extraction operations. Celect® CRD CMC enhances the efficiency and selectivity of mineral flotation processes, contributing to improved resource utilization and operational effectiveness in the mining industry.

Celect® SD CMC is a purified low viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It serves as a versatile additive in froth flotation processes by effectively dispersing and depressing gangue minerals over a broad dosage range. This water-soluble polymer dissolves readily in both cold and warm water, facilitating its use in various operational conditions. Celect® SD CMC enhances mineral separation efficiency by aiding in the selective flotation of valuable minerals while minimizing the recovery of unwanted components. Its reliable performance makes it an essential choice in mineral processing applications, contributing to improved productivity and resource utilization in the mining industry.

Finnfix® 300 CMC is a purified, medium-viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It is designed for paper surface treatment and mining mineral processing, providing excellent water retention, surface activity, and film-forming capabilities. Finnfix® 300 CMC delivers the desired rheology, ensuring optimal performance in various industrial applications.

stabicor® SC 1000 is a non-triazine based hydrogen sulfide scavenger renowned for its exceptional performance at low doses, ensuring superior efficacy. With its versatility, it can be utilized across a wide pH range and various applications, including oilfield injection water, produced water, multiphase systems, and drilling muds. This scavenger demonstrates good brine compatibility and minimal impact on scale formation tendency, making it suitable for treating hydrogen sulfide-containing water streams. Its fast action in brine and multiphase systems, coupled with its minimal formation of undesired H2S byproducts and biodegradability, aligns with environmental standards. stabicor® SC 1000 is REACh registered and ideal for use in aqueous and water-miscible systems.

stabicor® S 300 is a non-triazine based hydrogen sulfide scavenger with a neutral pH, delivering exceptional performance at low doses for superior efficacy. Its versatility allows usage across a wide pH range and various applications, including oilfield injection water, produced water, multiphase systems, drilling muds, gas storage wells, and hydrotesting. The neutral pH ensures excellent brine compatibility and prevents negative impacts on scale tendency, making it suitable for treating hydrogen sulfide-containing water streams. This scavenger acts fast in both brine and multiphase systems, and its readily biodegradable nature aligns with environmental standards. stabicor® S 300 is also REACh registered, ideal for aqueous and water-miscible systems.

stabicor® S 600 is a hydrogen sulfide scavenger designed for industrial additives with high performance. It is water and oil-soluble, suitable for use in condensate, crude oils, multiphase systems, processed fuel, and oil and gas applications. Additionally, it is applicable in water treatment processes.

stabicor® S 400 is a high-performance, triazine-free hydrogen sulfide scavenger designed for industrial additives. It offers excellent brine compatibility and wide pH range, with no scale tendency. Suitable for use in crude oils, heavy oils, multiphase systems, gas storage wells, drilling muds, oilfield injection water, oilfield produced water, asphalt, and packer fluids, it is applicable in hydrotesting, water treatment, and various oilfield applications. This yellow, water and oil-soluble liquid also features a neutral pH and is nitrogen-free.

stabicor® DE 910 functions as a dispersant in the oil, gas, and mining sectors, particularly in refinery and gas treatment processes. With its water solubility, it is suitable for use in various applications, including crude oils and diesel. Categorized under refinery and gas treatment chemicals, it aids in the dispersion of particles in liquids, ensuring efficient processing. Highlighting its environmental benefits, it is labeled as sourced from renewable resources and inherently biodegradable, making it an environmentally friendly choice for industrial additives.

stabicor® S 100 is a non-triazine based hydrogen sulfide scavenger, renowned for its exceptional performance at low doses, ensuring greater efficiency. It operates effectively across a wide pH and temperature range, offering full water/oil solubility without the formation of insoluble polymeric precipitation. These characteristics make it suitable for treating hydrogen sulfide-containing water, oil, and multiphase streams in various applications such as drilling (offshore and onshore), crude oil and gas production, terminal storage, and refinery treatment. With benefits like being fully soluble in oil and water, low viscosity at low temperatures, solvent-free composition, high stability at use concentrations, and anti-corrosive properties, stabicor® S 100 is recognized with CEFAS Gold Banner and is REACh registered.

DeTROPE CA - 100 is a liquid, anhydrous-modified carboxylate. It is suggested for use as a low-foaming hydrotrope in both aqueous and powdered alkaline systems.

Fracsal Waterbase EM is formulated as three separate products, Fracsal Waterbase EM1, Fracsal Waterbase EM2, and Fracsal Waterbase EM3, each product with a different crosslink time. The Fracsal Waterbase EM series consists of a specially sized, sparingly-soluble borate crosslinking agent suspended in an aqueous solution. Fracsal Waterbase EM series contains a solubilized alkaline salt modifier which is capable of adjusting the rate at which gelation of organic polymer occurs, without substantially altering the final pH or other characteristics of the crosslinked system. Typical usage concentrations for all Fracsal Waterbase EM products is from 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 1 minute to 3.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system.

Fracsal Waterbase HM is formulated as three separate products, Fracsal Waterbase HM1, Fracsal Waterbase HM2, and Fracsal Waterbase HM3, each product with a different crosslink time. The Fracsal Waterbase HM series consists of a specially sized, sparingly-soluble borate crosslinking agent suspended in an aqueous solution. Fracsal Waterbase HM series contains a supplemental additive as a scale inhibitor or iron control. Typical usage concentrations for all Fracsal Waterbase HM products is from 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 1 minute to 3.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system. Fracsal Waterbase HM packaging can be customized to meet specific requirements.

Fracsal II crosslinking additive consists of a specifically sized, sparingly-soluble borate crosslinking agent suspended in a hydrocarbon based carrier fluid. A standard concentration for Fracsal II is 1.0 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 3 to 5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system.

Fracsal Ultra SC crosslinking additive consists of a specifically sized, sparingly-soluble borate crosslinking agent suspended in a aqueous, crosslink modifier solution. The low pour point of the winterized Fracsal Ultra SC makes this product ideal for use under moderately cold conditions. The standard concentration for Fracsal Ultra SC is 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 1.5 to 7.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system. Fracsal Ultra SC packaging can be customized to meet specific requirements.

Fracsal MS is a concentrated borate solution that is used to crosslink guar and derivatized guar-based fracture fluid systems. Fracsal MS is added continuously during the fracturing fluid pumping operation. Fracsal MS produces a unique gel structure downhole that is elastic and thermally stable. This product exhibits improved sand transport into fractures, and the ability to re-heal itself and form a stable gel structure after shearing.

Shotwell Hydrogenics SHCI-3403 is a high temperature (177°C), water-soluble corrosion inhibitor, Concentrate that is diluted for RTU product.

LCI is a multi-purpose water soluble corrosion/scale inhibitor designed to protect both iron and copper alloy surfaces. DG LCI protects metal surfaces from corrosion with filming inhibitors, and mineral scale deposits are effectively prevented even at elevated temperatures. DG LCI provides an economical approach to industrial and commercial cooling water treatment since the need for pH control with acid is normally eliminated. DG LCI has also proven highly effective in controlling corrosion and scale in anionic water based drilling mud systems. In areas where heavy metals are restricted by water quality standards, DG LCI provides effective control of corrosion and scale.

Fracsal Waterbase EM is formulated as three separate products, Fracsal Waterbase EM1, Fracsal Waterbase EM2, and Fracsal Waterbase EM3, each product with a different crosslink time. The Fracsal Waterbase EM series consists of a specially sized, sparingly-soluble borate crosslinking agent suspended in an aqueous solution. Fracsal Waterbase EM series contains a solubilized alkaline salt modifier which is capable of adjusting the rate at which gelation of organic polymer occurs, without substantially altering the final pH or other characteristics of the crosslinked system. Typical usage concentrations for all Fracsal Waterbase EM products is from 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 1 minute to 3.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system.

Fracsal Waterbase HM is formulated as three separate products, Fracsal Waterbase HM1, Fracsal Waterbase HM2, and Fracsal Waterbase HM3, each product with a different crosslink time. The Fracsal Waterbase HM series consists of a specially sized, sparingly-soluble borate crosslinking agent suspended in an aqueous solution. Fracsal Waterbase HM series contains a supplemental additive as a scale inhibitor or iron control. Typical usage concentrations for all Fracsal Waterbase HM products is from 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 1 minute to 3.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system. Fracsal Waterbase HM packaging can be customized to meet specific requirements.

Fracsal I crosslinking additive consists of a specifically sized, sparingly-soluble borate crosslinking agent suspended in a hydrocarbon based carrier fluid. A standard concentration for Fracsal I is 1.0 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 2 to 3 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system. Fracsal I packaging can be customized to meet specific requirements.

Fracsal Waterbase EM is formulated as three separate products, Fracsal Waterbase EM1, Fracsal Waterbase EM2, and Fracsal Waterbase EM3, each product with a different crosslink time. The Fracsal Waterbase EM series consists of a specially sized, sparingly-soluble borate crosslinking agent suspended in an aqueous solution. Fracsal Waterbase EM series contains a solubilized alkaline salt modifier which is capable of adjusting the rate at which gelation of organic polymer occurs, without substantially altering the final pH or other characteristics of the crosslinked system. Typical usage concentrations for all Fracsal Waterbase EM products is from 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 1 minute to 3.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system.

Fracsal IV crosslinking additive consists of a specifically sized, sparingly-soluble borate crosslinking agent suspended in a carrier fluid with an extremely low aromatic content. The standard concentration for Fracsal IV is 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 6 to 9.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system. Fracsal IV packaging can be customized to meet specific requirements.

Fracsal Ultra EM is formulated as three separate products, Fracsal Ultra EM1, Fracsal Ultra EM2, and Fracsal Ultra EM3, each product with a different crosslink time. The Fracsal Ultra EM series consists of a specially sized, sparingly-soluble borate crosslinking agent suspended in an aqueous crosslink modifier solution. Fracsal Ultra EM series contains a solubilized alkaline salt modifier which is capable of adjusting the rate at which gelation of organic polymer occurs, without substantially altering the final pH or other characteristics of the crosslinked system. Typical usage concentrations for all Fracsal Ultra EM products is from 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 45 seconds to 3 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system.

Fracsal Ultra crosslinking additive consists of a specifically sized, sparingly-soluble borate crosslinking agent suspended in a aqueous, crosslink modifier solution. The low pour point of the winterized Fracsal Ultra makes this product ideal for use under extreme cold conditions. The standard concentration for Fracsal Ultra is 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 1.5 to 6.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system. Fracsal Ultra packaging can be customized to meet specific requirements.

Fracsal Ultra EM is formulated as three separate products, Fracsal Ultra EM1, Fracsal Ultra EM2, and Fracsal Ultra EM3, each product with a different crosslink time. The Fracsal Ultra EM series consists of a specially sized, sparingly-soluble borate crosslinking agent suspended in an aqueous crosslink modifier solution. Fracsal Ultra EM series contains a solubilized alkaline salt modifier which is capable of adjusting the rate at which gelation of organic polymer occurs, without substantially altering the final pH or other characteristics of the crosslinked system. Typical usage concentrations for all Fracsal Ultra EM products is from 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 45 seconds to 3 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system.

Fracsal EM is formulated as three separate products, Fracsal EM1, Fracsal EM2, and Fracsal EM3, each product with a different crosslink time. The Fracsal EM series consists of a specially sized, sparingly-soluble borate crosslinking agent and an alkaline salt modifier suspended in a carrier fluid with an extremely low aromatic content. Typical usage concentrations for all Fracsal EM products is from 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 2 minutes to 11.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system. Fracsal EM packaging can be customized to meet specific requirements.

Tetra 12 is an Imidazoline with Tetra 241M (ADBAC) 70% active. It is a water soluble corrosion inhibitor concentrate designed for pipeline applications.

APChem CFL 205 is a synthetic, water-soluble, latex powder effective from 60 to 232°C to make cement more elastic (less shattering on perforating). Can be used with fresh water, seawater, calcium chloride water (up to 8%), and saturated saltwater.

Fracsal Waterbase MP consists of a specifically sized, sparingly-soluble borate crosslinking agent suspended in an aqueous solution. The standard concentration for Fracsal Waterbase MP is 1 to 3 gal per 1,000 gal of fracturing fluid. Crosslink times range from 2 to 6 minutes, depending upon the pH, temperature, and type of polymer-based fracturing fluid system. Fracsal Waterbase MP packaging can be customized to meet specific requirements.

Fracsal EM is formulated as three separate products, Fracsal EM1, Fracsal EM2, and Fracsal EM3, each product with a different crosslink time. The Fracsal EM series consists of a specially sized, sparingly-soluble borate crosslinking agent and an alkaline salt modifier suspended in a carrier fluid with an extremely low aromatic content. Typical usage concentrations for all Fracsal EM products is from 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 2 minutes to 11.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system. Fracsal EM packaging can be customized to meet specific requirements.

Fracsal Waterbase crosslinking additive consists of a specifically sized, sparingly-soluble borate crosslinking agent suspended an aqueous, crosslink modifier solution. The standard concentration for Fracsal Waterbase is 1 to 3 gal per 1,000 gal of fracturing fluid with crosslink times ranging from 1 to 8.5 minutes depending upon the pH, temperature, and type of polymer-based fracturing fluid system.

Tetra 1172 is a water soluble filming amine/anti water foulant. It is a water soluble corrosion inhibitor for pipeline applications.