stabicor® SC 1000

stabicor® SC 1000 is a non-triazine based hydrogen sulfide scavenger renowned for its exceptional performance at low doses, ensuring superior efficacy. With its versatility, it can be utilized across a wide pH range and various applications, including oilfield injection water, produced water, multiphase systems, and drilling muds. This scavenger demonstrates good brine compatibility and minimal impact on scale formation tendency, making it suitable for treating hydrogen sulfide-containing water streams. Its fast action in brine and multiphase systems, coupled with its minimal formation of undesired H2S byproducts and biodegradability, aligns with environmental standards. stabicor® SC 1000 is REACh registered and ideal for use in aqueous and water-miscible systems.

Brand: stabicor (30 products)

Chemical Family: Aldehydes, Amines, Diols, Glycols

Applicable Processes: Hydrogen Sulfide Removal, Oilfield Applications, Water Treatment

Features: High Performance, Water Soluble, Wide pH Range

End Uses: Asphalt, Drilling Muds, Fuel

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Features & Benefits

Labeling Claims
Industrial Additives Features
Key Benefits

stabicor® SC 1000 can be used in a wide pH range and applications. This scavenger composition shows good brine compatibility and no major impact on scale formation tendency. These benefits allow the use in treatment of hydrogen sulphide containing water streams in application like produced water and injection water.

  • Ideal for use in aqueous and water miscible systems
  • Good Brine compatibility
  • No/ low scale tendency
  • Fast acting in Brine and Multiphase systems
  • No/ low formation of undesired H2S byproducts
  • Ready biodegradable
  • REACh registered

Applications & Uses

Markets
Applications
Applicable Processes
Industrial Additives End Use
Application Notes
  • Oilfield injection water
  • Oilfield produced water
  • Multiphase systems
  • Drilling muds, Completion, workover, and packer fluids
  • Gas storage wells and well systems
  • Hydrotesting
Dosage Information

Under normal use patterns the following treatment is enough in most applications:

  • In general, a treatment of scavenger: H2S of 3 : 1 is recommended.
  • That means to treat 1 ppm H2S the use of 3 ppm scavenger product is needed.

Properties

Color (Properties)
Physical Form
Soluble In
Soluble in
Water, Water (at 20°C)
Dispersible in
Oil
Physico-Chemical Properties
ValueUnitsTest Method / Conditions
Nitrogen Content8.0%-
Density (at 20°C)1.189 - 1.206g/cm³-
Flash Point82.0°CASTM D7094
Viscosity (at 20°C)350.0mPa.s-
Foaming CharacteristicsNon foaming (0.15 % in water)-DIN 53902
pH (1% in water, 20°C)9.6--
Test Parameter
ValueUnitsTest Method / Conditions
H₂S Capacity (scavenger : H₂S)3:1ppm-

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Packaging Type
Packaging Information

Container Sizes: 200 kg, 1000 kg

Storage & Handling

Shelf Life
12 months
Storage Conditions
  • Prevent from freezing and keep away from high temperatures and direct sunlight.
  • Store in original package at room temperature.
  • Possible CO2 formation may occur. Proper storage, packaging and a pressure- relieving lid are mandatory. The product quality is not affected by this.