Products in Industrial Additives & Materials: Water Treatment

MultiTech Difunctional B is a product that is specially developed for the formation of active chlorine dioxide generated by mixing powdered inputs that are indicated for higher flows and systems of medium or high complexity. It is used in applications that demand safety, metering accuracy, and reliability. This product is a blend of water-soluble salts, making it 100% soluble, and easy to handle and apply. It also has a low operating cost.

MultiTech Surfactant Ais a REACH-registered; TSCA-pending sophorolipid biosurfactant (INCI: glycolipid) that can be tailored for use in a variety of industrial applications, by acting as a dispersant, emulsifier, wetting agent and more. MultiTech Surfactant A attributes:Low HLBLow/no foamingHydrophobicExcellent emulsifier MultiTech Surfactant A biosurfactants:USDA certified 100% biobasedReadily biodegradableNo prop 65 issues & no 1,4-dioxane Non-GMO & palm oil freeLow carbon footprint

MultiTech Corrosion Inhibitor A is a cyclic aliphatic diamine made of 100% reclaimed material that is used primarily in epoxy coatings and composites. It provides chemical resistance over a broad range of chemicals, which makes it a superior choice for industrial and marine coatings. Other applications include mining, oil & gas, and pharmaceutical intermediates.

DiTech Multifunctional C is an economical form of reactive sulfur that is typically a light-yellow colored solution with the accompanying odor of rotten eggs. Hydrogen Sulfide (H‚‚S), a toxic gas, is evolved upon contact of Sodium Hydrosulfide with acids.

DiTech Rheology Modifier is a water-soluble thickener for anionic bitumen or oil emulsions, including products also containing minerals.

BTC® 85-RT is a quaternary for formulation into a wide variety of institutional and industrial cleaning applications, including water treatment, gas and oil drilling muds and packer fluids, gas and oil recovery injection water systems, gas and oil fracturing fluid systems, and wood preservation. This biocidal active is associated with a u.S. Epa-registered end-use formulation that meets the criteria for applications against emerging viral pathogens. End-use formulations meeting this criteria may be considered for use as hard surface disinfectants against sars-cov-2, the novel coronavirus that causes the disease covid-19.

DYNOL® 607 is a high-performance, non-ionic superwetter capable of delivering the exceptional equilibrium and dynamic surface tension reduction synonymous with the Dynol name. It also boasts improved ease-of-incorporation and formulation compatibility compared to the more hydrophobic DYNOL® 607 Surfactant. Furthermore, comparative wetting performance tests have confirmed that DYNOL® 607 Surfactant is a valuable replacement for conventional fluorosurfactants and offers a cost-effective, non-persistent alternative to emerging fluorosurfactant technology.

DYNOCEL® 900 is a 20 x 50 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

TMT 15® is an environmentally friendly solution used to separate and remove heavy metals from wastewater generated in numerous industrial applications. It enables compliance with strict environmental regulations and offers high effectiveness in various applications. TMT 15® is non-toxic, non-hazardous, has good ecological properties, and can be handled safely without unpleasant odors. It benefits from experienced application and technical competence.

DYNOCEL® 600 is a 14 x 28 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

DYNOL® 604 is a high-performance, non-ionic organic superwetter known for its excellent equilibrium and dynamic surface tension reduction, a hallmark of the Dynol brand. It exhibits lower foam and dynamic surface tension values compared to the more hydrophilic DYNOL® 607 surfactant. Moreover, comparative wetting performance tests have demonstrated that DYNOL® 604 Surfactant serves as an excellent alternative to conventional fluorosurfactants and offers a cost-effective solution in place of new fluorosurfactant technology.

DYNOCEL® 900 is a 28 x 48 mesh granular alumina scavenger designed to eliminate process impurities from vapor or liquid phase streams, whether aqueous or hydrocarbon. It serves as a highly effective desiccant in all applications, with a particular advantage in removing low-level polar and/or ionic species. Its high porosity facilitates faster diffusion rates, while the extensive surface area offers enhanced capacity. This adsorbent is widely utilized for extracting impurities across a diverse range of applications.

DelPAC® 2950 is widely accepted as the preferred polyaluminum chloride for cost-effective improvement of finished water quality. As a coagulant, it enhances filter performance, potentially eliminates the need for pH adjustment with alkalis, and decreases sludge residuals. It meets the specifications of American Water Works Association Standard B408-18 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dosage of 250 mg/L.

USALCO Sodium Aluminate Solution (45%) is an economical source of highly reactive alumina manufactured by dissolving alumina tri‐hydrate (ATH) into sodium hydroxide and water. USALCO 45 is also stabilized to prevent alumina from precipitating. The use of only stringently selected raw materials and state‐of‐the‐art manufacturing practices ensures that USALCO 45 is of the highest quality. USALCO 45 meets the specifications of the American Water Works Association Standard B405‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐Health Effects at a maximum dosage of 89 mg/L.

USALCO Dry Aluminum Sulfate (Iron Free Grade) is manufactured using a state-of-the-art process and high-quality raw materials, which ensures that the product meets the highest quality standards. USALCO also produces dry alum in various other grades (low-iron and FCC-grade) and in specialty granular sizes to satisfy even the most difficult applications. USALCO's dry alum is used in water treatment, colors and dyes, leather tanning, papermaking, and many other industrial applications. It meets the specifications of the American Water Works Association Standard B403-16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects at a maximum dosage of 150 mg/L.

USALCO Aluminum Sulfate Solution is manufactured by dissolving alumina trihydrate (ATH) in water and sulfuric acid. To ensure the highest quality of this product, stringently selected raw materials and state-of-the-art manufacturing practices are used. USALCO Alum meets the specifications of the American Water Works Association Standard B403‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐ Health Effects at a maximum dosage of 150 mg/L.

USALCO Dry Aluminum Sulfate (Purified Grade) is manufactured to meet high-quality standards using advanced processes and premium raw materials. It comes in various grades, including low-iron, iron-free, and FCC grades, and in special granular sizes to meet diverse needs. It is utilized in industries such as water treatment, dye production, leather tanning, papermaking, and others. This dry alum meets the American Water Works Association Standard B403-16 and follows NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum recommended dosage of 150 mg/L.

DelPAC® 1525 is an advanced formulation of basic polyaluminum chloride that has demonstrated exceptional effectiveness in the treatment of drinking water and the elimination of phosphorus in municipal and industrial wastewater systems. It conforms to the specifications outlined in the American Water Works Association Standard B408-18 and meets the criteria established in NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dose of 250 mg/L.

DelPAC® 2500 is a highly regarded polyaluminum chloride solution that is known for its cost-effectiveness in enhancing the quality of finished water. As a coagulant, it can extend filtration runs, minimize or eliminate the requirement for alkali pH adjustment, and decrease sludge residuals. It conforms to the American Water Works Association Standard B408-18 and NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum recommended dosage of 250 mg/L.

USALCO Aluminum Sulfate Solution (Acidified) is produced by dissolving alumina trihydrate in water and sulfuric acid. Only the finest raw materials and advanced manufacturing techniques are used to ensure the top-notch quality of this product. It conforms to the specifications outlined in the American Water Works Association Standard B403-16 and satisfies the criteria set forth in NSF/ANSI 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dose of 150 mg/L.

USALCO Ferrous Sulfate (5%) is an effective liquid coagulant made from bivalent iron (Fe2+). It is produced through the reaction of high-purity iron ore and metallic iron with sulfuric acid. This solution can be efficiently used as a flocculant and coagulant in the treatment of municipal and industrial water and wastewater. Its applications include controlling hydrogen sulfide, reducing chromate and complexing cyanide, de-chlorination, conditioning sludge, and precipitating phosphate with aeration.

USALCO Sodium Aluminate Solution (38%) is an economical source of highly reactive alumina manufactured by dissolving alumina tri‐hydrate (ATH) into sodium hydroxide and water. USALCO 38 is also stabilized to prevent alumina from precipitating. The use of only stringently selected raw materials and state‐of‐the‐art manufacturing practices ensures that USALCO 38 is of the highest quality. USALCO 38 meets the specifications of the American Water Works Association Standard B405‐16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals ‐Health Effects at a maximum dosage of 105 mg/L.

AlcoPAS™ 1000 is a medium-basicity, advanced ultra-low-chloride, aluminum-based coagulant and flocculant for treating potable water, industrial process water, and wastewater. It is a clear to slightly hazy, colorless to light-beige aqueous solution. This product can be certified to NSF/ANSI Standard 60 for the treatment of potable water.

DelPAC® 1842 is an advanced formulation of basic polyaluminum chloride that has demonstrated exceptional effectiveness in the treatment of drinking water and the elimination of phosphorus in municipal and industrial wastewater systems. It conforms to the specifications outlined in the American Water Works Association Standard B408-18 and meets the criteria established in NSF/ANSI 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dose of 250 mg/L.

USALCO Dry Aluminum Sulfate (Rice Grind) is manufactured using state-of-the-art processes and high-quality raw materials to ensure that the product meets the highest quality standards. USALCO offers various grades of dry alum, including low-iron, iron-free, and FCC grades, as well as specialty granular sizes to meet a wide range of applications. This product is used in water treatment, dye production, leather tanning, and papermaking, among other industrial applications. It meets the specifications of the American Water Works Association Standard B403-16 and complies with the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum recommended dosage of 150 mg/L.

USALCO Dry Aluminum Sulfate (Low Iron Grade) is produced using advanced techniques and high-quality materials to meet the highest quality standards. USALCO also produces dry alum in various other grades (iron-free and FCC-grade) and custom granular sizes to meet a wide range of applications. This product is used in water treatment, dye production, leather tanning, papermaking, and other industrial applications. It adheres to the American Water Works Association Standard B403-16 and meets the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum dosage limit of 150 mg/L.

DelPAC® 2000 is a widely accepted polyaluminum chloride that is known for its cost-effective ability to improve finished water quality. As a coagulant, it can offer longer filtration runs, minimize or eliminate the need for pH adjustment with alkalis, and reduce sludge residuals. It complies with American Water Works Association Standard B408-18 and NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum recommended dosage of 250 mg/L.

DelPAC® XG (Aluminum Chlorohydrate) is a highly effective coagulant that is used in water and wastewater treatment. DelPAC® XG is proven to be an excellent option for removing organic matter, TSS, and copper. It is known for its high concentration and basicity, making it effective in removing organic matter and performing well over a wide pH range. This product meets the standards set by the American Water Works Association Standard B408-18 and complies with the health effects requirements of NSF/ANSI/CAN 60, with a maximum recommended dosage of 250 mg/L.

DelPAC® 2450 is a widely accepted polyaluminum chloride solution that is known for its cost-effective benefits in improving water quality. As a coagulant, it can provide longer filtration runs, minimize the need for pH adjustment with alkali, and decrease the amount of sludge residuals. This product meets the standards set by the American Water Works Association Standard B408-18 and complies with NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects at a maximum dosage of 250 mg/L.

DelPAC® 2020 is a highly effective polyaluminum chloride solution for improving the quality of finished water. As a coagulant, it can offer longer filtration runs, minimize or eliminate the need for pH adjustment with alkalis, and decrease sludge residuals. This product adheres to the standards set by the American Water Works Association Standard B408-18 and meets the requirements of NSF/ANSI/CAN 60: Drinking Water Treatment Chemicals - Health Effects with a maximum recommended dosage of 250 mg/L.

WWT 3840 LO is a structured, high-molecular-weight, cationic polyacrylamide in emulsion form. It is used as a flocculant in a variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering. It is well-suited for high-shear applications such as rotary presses, screw presses, and centrifuges.

PWT 3140 is a medium charge, medium molecular weight cationic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, and has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

PWT 3001 is a high-charge, very high-molecular-weight anionic polyacrylamide in dry form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

WWT 1082LS is a high charge, high molecular weight anionic polyacrylamide in low solids emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, and has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

PWT 4300 is a low-charge, high-molecular-weight, anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

PWT 3230 is a high molecular weight non-ionic polyacrylamide in emulsion form, used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering.