Products in Battery & Electronic Materials: Electrolyte

γ - Butyrolactone (GBL) has a wide range of practical applications because of its low freezing point, high boiling point, and a unique combination of solvent and electrical properties. It has applications as a solvent for special resins, in photography, in batteries, and as an electrolyte. Also a number of derivatives are synthesized from GBL.

Stanyl® SN-PURE (Succinonitrile) is a high-purity form of succinonitrile used as an electrolyte additive in lithium-ion batteries. It enhances battery safety and extends the service life by reducing the generation of harmful gasses. The lifetime of nickel (Ni), manganese (Mn), and cobalt (Co) cathode chemistries is increased with the inclusion of Stanyl® SN-PURE. It forms a protective layer at the cathode, preventing electrolyte decomposition, protecting against oxidation, and inhibiting dendrite formation.

Al-doped Lithium Lanthanum Zirconate (Li6.24La3Zr2Al0.24O11.98)

NANOMYTE® SE-50 is a hybrid polymer composite solid electrolyte for use in solid state lithium batteries. The two key challenges for achieving high performance solid state batteries are the low ionic conductivity of many solid electrolytes and the large impedance posed by the electrode-electrolyte interface. SE-50 addresses these challenges by having a high Li+ ionic conductivity, combined with low interfacial resistance between the electrodes and solid electrolyte. These properties are enabled by the unique elastomeric self-adhesive properties of the solid electrolyte. In addition, NANOMYTE® SE-50 has excellent electrochemical stability, which allows its use with high voltage cathode materials.

Fine "LLTO" - Lithium Lanthanum Titanate (Li0.34La0.56TiO3) solid electrolyte powder

NANOMYTE® SE-50A is a Polymer Ceramic composite electrolyte (30% in Acetonitrile)

PEO-based Polymer Solid Electrolyte

NANOMYTE® SSE-20 is a solvent-based dispersion fluid designed to be compatible with NANOMYTE® SSE-10 LSPS powder (and other sulfide-based solid electrolyte powders). The material is specially formulated to not react with LSPS and contains proprietary additives with an organic lithium salt, which acts as an ionically conductive binder. When SSE-20 is mixed and dispersed with a powder, the material is ready to cast into flexible tapes, providing more options for cell designers to combine with suitable cathode and anode active materials.

NANOMYTE® SE-50N is a Polymer Ceramic composite electrolyte (30% in NMP)

NANOMYTE® SSE-10 (LSPS) is a Lithium Tin Phosphorous Sulfide

Lithium Phosphorus Sulfide (β-Li3PS4)

"LPSCl" - Lithium Phosphorus Sulfur Chloride (Li6PS5Cl)

Nickel Oxide, Green is an inorganic compound, produced by controlled oxidation of nickel powder from the thermal decomposition of nickel carbonyl gas.

Ta-doped Lithium Lanthanum Zirconate ( Li6.4La3Zr1.4Ta0.6O12)

Lithium Aluminum Titanium Phosphate (Li1.4Al0.4Ti1.6(PO4)3)

Lithium Phosphorus Sulfur Chloride Iodide (Li6PS5Cl0.9I0.1)

Nickel Oxide, Black is an inorganic compound, produced by controlled oxidation of high purity carbonyl nickel powder.

UCC Shchekinoazot Sulphuric Acid (Battery Acid) is a Colorless, odorless, non-combustible, visco-oily hygroscopic liquid. Sulphuric Acid is soluble in water, is highly active when interreacting with reducing agents, organic matters, metals, alkalies, is an aggressive media for non-ferrous metals and light steels (at 90% concentration). At temperature 340°C sulphuric acid degrades into sulfur dioxide (SO2), sulfur trioxide (SO3) and sulfurous gas.

Potassium formate (HCOOK) is a white, hygroscopic, readily biodegradable, and environmentally safe salt. When compared with traditional fluoride, chloride, bromide, sulfate and nitrate salts, HCOOK offers high solubility (3.3g/mL water), high density, alkaline pH (7.0-8.5 @ 25°C, 1 M in H2O), lower crystallization temperature,viscosity lower than LiBr, low latent heat of absorption, less corrosive than chloride-based salts, and negligible vapor pressure. Because of such versatile properties.

Prasol Chemicals LITHIUM HYDROXIDE is used in production of lithium greases as a heat transfer medium and as a storage-battery electrolyte in ceramics and some Portland cement formulations.

Cobalt (II) Formate Dihydrate (Co(HCOO)2·2H2O) is a water-soluble reddish crystalline solid.

Sodium acetate trihydrate (NaCH3COO·3H2O) is a promising Phase Change Material (PCM) used to fabricate reusable heating pads and hand warmers because of its relative high heat of fusion. Its alkalinity (pH 8.5-9.5), as well as its low price, makes sodium acetate trihydrate the material for choice several applications.

is used in preparation of Catalyst for H2O2 and as a part of Electrolyte in Lithium-ion Batteries

Cadmium nitrate tetrahydrate is a global producer of Cadmium material solutions. Our product offerings span a range from Cadmium metal ingots, rods, and powder to Cadmium compounds like Cadmium oxides. Our state-of-the-art production facility and the associated products are fully REACH compliant, comply with international EHS standards and are safe. Our customer base can be found in the area of alloys, energy storage, pigments as well as in the solar cell world.

Köstrosol® 1540 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na+). Köstrosol® 1540 is a pure colloidal silica without any organic additives.

Potassium acetate (CH3COOK) is a hygroscopic granular powder which is soluble in water (and many other solvents). Aqueous solutions of potassium formate have pH between 7.5-9.0 which makes slightly alkaline to a near neutral pH which is not caustic or corrosive unlike bromide, fluoride, chloride, nitrate, hydroxide, sulfate, thiosulfate or carbonate salts, which are either strongly acidic or basic. Such favorable pH makes it an easy choice for users to substitute corrosive salts in many applications.

Beijing SR Technology Ethylene Carbonate is an organic solvent with high polarity, and superior solubility in water, organic solvents, and high polymers.

2-Hydroxyethylammonium formate is one of the simplest ionic liquids. This ionic liquid is miscible with many solvents, both aqueous and organic. It is a sustainable chemical because of its low volatility, high chemical and physical stability, recyclable, reusable, and easy to handle.