Products in Surface Finishes: Pultrusion

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Crystic® Polyester Resin 491PAT is a versatile, pre-accelerated, unsaturated polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. This product is thixotropic and can be applied with either brush or spray equipment. It may also be used in the pultrusion process for the production of profile sections. This product is suitable for the fabrication of high-performance boat hulls destined for use in warm and tropical waters.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

SURFITEX™ E 30 L is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.a

SURFITEX™ E 35 L is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.

Polyform Veil Mat PVM/425/V40/120 is a stitch-bonded reinforcement textile consisting of polyester spunlace nonwoven stitched to a layer of chopped strand glass fiber.

SURFITEX™ EU 45 G NL is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.

SURFITEX™ E 35 NL is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.

Polyform Veil Mat PVM/600/V40/120 is a stitch-bonded reinforcement textile consisting of polyester spunlace nonwoven stitched to a layer of chopped strand glass fiber.

Schmelzer Industries TRUMAT 5/8 Ounce is a non-woven, semi-continuous strand glass fiber mat designed for pultrusion and filament winding. Ideal for use in thin wall profiles or for resin rich surface finishes.

Schmelzer Industries TRUMAT 3/4 Ounce is a non-woven, semi-continuous strand glass fiber mat designed for pultrusion and filament winding. Ideal for use in thin wall profiles or for resin rich surface finishes.

Schmelzer Industries TRUMAT 1/2 Ounce is a non-woven, semi-continuous strand glass fiber mat designed for pultrusion and filament winding. Ideal for use in thin wall profiles or for resin rich surface finishes.

SURFITEX™ E 50 L is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.

Schmelzer Industries TRUMAT 1/4 Ounce is a non-woven, semi-continuous strand glass fiber mat designed for pultrusion and filament winding. Ideal for use in thin wall profiles or for resin rich surface finishes.

Polyform Veil Mat PVM/300/V40/120 is a stitch-bonded reinforcement textile consisting of polyester spunlace nonwoven stitched to a layer of chopped strand glass fiber.