Products in Reinforcements: Polypropylenes (PP)

Composite Materials Reinforcement B is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weightpowerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weight

Fibres Recherche Developpement Fibra B2 is a collection of European (flax, hemp) and exotic (sisal, coco, kenaf...) fibers with mean lengths ranging from 1 to 20 mm. These fibers are intended for use in the reinforcement of thermoplastic, thermoset, and concrete materials..

SELCOM SRL Multiaxial Technology CBX50 is a non-crimped fabric reinforced with carbon fibers.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

StarStran® BMC cut fibers 991 CS EC 13 991 (51mm) long cut fibers are produced of E-glass fibers with fixed lengths. These short fibers LCF 991 are coated with a chemical size layer. The recommended field of application is carding /needling, air-laying process as well as the insulation of ovens. Resin-compatibility: PP, PA, polyester and further technical polymers.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

Kamenny Vek BCS 13-1/4”-KV02M is mainly recommended for friction material production using phenolic resin and for production of compounds by extrusion process with polyamide, polypropylene, polyethylene or high density.

Mafic CFLL - DD - SS is a Basalt Chopped Fiber for reinforcement of thermoplastic and thermoset polymers, and concrete applications.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

Woven fabrics made of FILAVA™ WF BSB3_0800.XXX.0127.T2/2.ISAA continuous filament for technical textiles and high-performance composites.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

FILAVA™ MECY BSB3.7 320-80(10) Z30 IS65T CS03E are strands of continuous filaments made of enhanced mineral volcanic rock (aggregated and enriched batch) twisted in the yarns. The constituent strands or rovings are treated with “by-matrices or by-process” tailor made sizing system for excellent downstream treatment and transformation’s performance as well for high adherence to matrices in composites.

Mafic Basalt Direct Roving 17 µm is a diameter for reinforcement of thermoplastic and thermoset polymers.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

G-TEX TM SM45 is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. SM45 denotes Fiber type; it signifies Standard modulus with strength between 4-5GPa.is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. SM45 denotes Fiber type; it signifies Standard modulus with strength between 4-5GPa.

362C Direct Roving is specifically designed for continuous fiber-glass reinforced thermoplastic (CFRT) application in modified PP/PE resin. CFRT materials are widely used in automotive, construction, sports, electric and electronic applications.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

Non-crimp multiaxial fabrics or technical textiles made of FILAVA™ NCF BX BSB3.7_210.± 45.060.0127.IS71 continuous filament for high-performance structural composites.

910 Assembled Roving for thermoplastic is coated with a silane-based sizing compatible with multiple resin systems such as PP, AS/ABS, especially reinforcing PA for good hydrolysis resistant. 910 is typically designed for twin-screw extrusion process to manufacture thermoplastic granules. Key applications include railway track fastening pieces, automotive parts, electrical & electronic applications.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

Woven fabrics made of FILAVA™ WF BSB3_0300.XXX.0127.P.ISAA continuous filament for technical textiles and high-performance composites.

Mafic Basalt Direct Roving 10 µm is a diameter for reinforcement of thermoplastic and thermoset polymers.

G-TEX TM 1200 is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. 1200 denotes the fabric width in mm.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

SELCOM SRL Multiaxial Technology CBX150 is a non-crimped fabric reinforced with carbon fibers.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.