Products in Prepregs & Molding Compounds: Structural Parts

High flexural, impact and tensile strengths, and very high flexural modulus. It is constructed of glass fabric impregnated with an epoxy resin system. NP512 is engineered to provide better physical properties than NEMA FR-4, and be more dimensionally stable than standard NP510A. Applications for this material are where enhanced flexural modulus and physical strength are desired.

Phenolic paper based grade for mechanical applications. Good tensile, compressive and flexural strength. Primarily a machining material, but may be hot punched up to .093" thick. NP610 meets MIL-I24768/12 Type PBM, ASTM D709 Type X and IEC 60893-3-4 PFCP 201.

CM 15 is a Visual composites, Semi Structural and Fast Isothermally Press Curable, Class A Surface quality for painting, Hot Demoldable, Improved UV and environmental resistance, Improved fiber imprinting resistance

AX-5201 is a Toughened Epoxy Carbon Laminating Prepreg.

THINPREG™ TP 380CE is a Uni-Directional tape made of Carbon fibers impregnated with a thermoset cyanate ester resin system. ThinPreg™ 380CE uses a high Tg resin well adapted to autoclave molding at 180°C (350°F) with post-curing. The Fiber Areal Weight of ThinPreg™ 380CE ranges from 30g/m2 to 300g/m2 and the standard resin content ranges from 32 to 42% by weight. The North Thin Ply Technology process allows for the adjustment of the fiber / resin ratio upon request.

CM11 resin is Mid Tg and its prepregs are suitable for hot painting, hot gluing and cataphoresis processes. New resin system not only cures under 3 minutes at 150°C at press under isothermal curing conditions but also hot de-moldable and long out-life of two weeks at ambient temperature. These extreme conditions does not affect the visual Performance of prepreg system with CM11, capable of Class A Surface. Drapability is suitable for press molds and low to medium tack optimized for press curing.

AX-4270 is Structural Epoxy Aramid Prepreg.

OM 12 is a glass fiber or carbon fiber reinforced composites offer advantages of high corrosion resistance and high strength-to-weight ratio than traditional wood or steel materials. Kordsa may provide different reinforcement materials including glass or carbon UD, 2D and multiaxial impregnated with epoxy. For the huge size part production, generally vacuum bag only prepregs (OM12) are recommended

EF 12 is above 240 °C. High Tg EF12 resin system is used to produce structural prepregs. Optimized cure methods for these resin systems are Press and Autoclave molding.

EF 10 is highly toughened Mid Tg prepreg can be cured with autoclave and used in extreme applications in automotive industry and aviation industry.

OM14 is a fast curing structural prepreg for press curing for the needs of structural parts used in Automotive Industry. Its short curing cycle and hot de-moldable nature are especially optimized for mass production at Automotive Industry with the addition of exceptionally long out life at room temperature. OM14 eliminates the need of Autoclave and Cold storage plus it is especially optimized for mass production. New resin system not only cures under 1-2 minutes at 150°C at press under isothermal curing conditions but also hot de-moldable and long out-life of one year at ambient temperature.

CM12 resin is Mid Tg, dicy-free fast cure, hot demoldable isothermal press curable resin system and it is suitable for sanding and metal composite hybrid part production. Drapability is suitable for press molds and low to medium tack optimized for press curing. Performance of prepreg system with CM12, capable of Class A Surface.

OM10 is highly toughened structural Low Tg resin for press and autoclave curing for the needs of structural parts used in Automotive Industry. OM10 prepreg cures at both press and Autoclave with long out-life of 4 weeks at ambient temperature.

OM13 is a structural resin system. It is translucent when cured.

AX-5270 is a Structural Epoxy Carbon Prepreg.

THINPREG™ TP 190 is a system designed for aeronautic structural part, combining high strength and high toughness with a very good thermal stability. The PES-toughened epoxy system shows outstanding compression and fatigue properties.

OM11 is a resin structural Low Tg prepreg that specifically customized for fatigue resistance part production in Industry. OM11 prepreg materials can be curable with Autoclave and Press.

AX-6270 is a Structural Epoxy Unidirectional Prepreg.

EF 11 is also optimized for press molding and used in extreme applications. The highest glass transition temperature reached with epoxy products.