Products in Bulk Molding Compounds (BMC): Compression Molding

Mar-Bal MB5500 with a UL RTI rating of 160°C-170°C, the 5500 provides a superior heat resistant material for your application.

Lattice Composites LCMC-C2 has the highest strength BMC.

Mar-Bal MB4000 is a best high track resistant material. A flame retardant polyester molding compound with moderate strength, excellent electrical properties and exceptional arc and track resistance.

Toray Toray Cetex® MC1322 New is a thermoplastic bulk molding compound (BMC) fabricated from Toray Cetex® TC1320 PEKK thermoplastic uni-directional tape. It is based on a semi-crystalline PEKK thermoplastic polymer and as such has excellent resistance to chemicals and solvents, while also offering excellent elevated service performance, good hot/ wet strength, and offers superior performance in flammability properties. Toray Cetex® MC1322 PEKK is offered on standard-modulus carbon fibers in lengths of up to 25.4 mm (1”). Intermediate modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. This product also allows complex shapes to be made with varying wall thicknesses, integrated ribs, and reinforcing structures. Compression molded parts are used to replace metal parts for weight savings.

Mar-Bal MB2000-25 is an excellent flame and track resistant material possessing outstanding electrical and mechanical properties.

Toray MS-1H is a carbon fiber/epoxy resin compression molding system using a high-modulus PAN carbon fiber. This is an excellent high stiffness molding compound that has been qualified to military and commercial Applicationss. It has excellent out time stability and processes very well in small and thin cross-section parts. It is the performance alternative to MS-4H 25.4 mm (1”) molding compound. MS-1H is offered with 25.4 mm (1”) carbon fibers, or for smaller parts, a 12.7 mm (1/2”) fiber version is available. 138°C (280°F) Fast Cure Intermediate-Modulus Compression Molding System

Resinoid 1328 is a glass reinforced, two-step phenolic molding compound. It was specifically developed for applications requiring exceptional tensile strength such as grinding wheels. Resinoid 1328 exhibits excellent electrical and thermal properties as well as dimensional stability. This material comes in pelletized from and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

Haysite Reinforced Plastics 14100 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Lattice Composites LCMC-G2 is a high Tg version of LCMC-G1.

StarPCS™ SBMC-900 are carbon fiber reinforced molding compounds containing a discontinuous carbon fiber, a specially formulated StarPCSTM polycarbosilane resin, and refractory particulate. SBMC-900 and SBMC-998 can be used in the cured state, but are specifically designed for use as a ceramic matrix composite (CMC) thermal or mechanical structure.

Haysite Reinforced Plastics 18600 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Lattice Composites LCMC-G1 is used as general-purpose BMC. It is net shape, easy processing, high stiffness.

Haysite Reinforced Plastics 270FRII are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Resinoid 2016 is a fabric reinforced, two-step phenolic molding compound. It is available in bulk form and is recommended for compression or transfer molding.

Mar-Bal MB2000-20 is an excellent flame and track resistant material possessing outstanding electrical and mechanical properties.

Resinoid 2020 is a fabric reinforced, two-step phenolic molding compound. It exhibits excellent moldability in transfer molding. It possesses excellent dimensional stability and impact strength properties. It is available in bulk form and is recommended for compression or transfer molding.

Mar-Bal MB3000-15NY is a superior chemical-resistant material with excellent flame and track resistance.

Haysite Reinforced Plastics 24500 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Resinoid 1382 is a glass reinforced, two-step phenolic molding compound formulated for applications requiring exceptional tensile strength. It has been used to replace cast aluminum in certain applications. Resinoid 1382 exhibits excellent dimensional stability, electrical and thermal properties. It is supplied in pelletized form for use in injection, transfer, and compression molding. It can be preformed on automatic equipment.

Urochem Molding Compound 161 by BI-QEM is a highly refined cellulose reinforced urea formaldehyde resin. It is modified with special purpose additives, pigments, cure regulators and lubricants. It exhibits low shrinkage, low water absorption and high strength. It offers high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It provides excellent electrical properties and resistance against surfactants & weak bases. It is designed for processing by compression molding. Urochem Molding Compound 161 is suitable for circuit breakers and electrical accessories. Its shelf life is of 12 months below 20°C. The molded products can be recycled and exhibits good UV stability with good moisture resistance.

Resinoid 2101 is an organic fiber reinforced, two-step phenolic molding compound. It was specifically developed for molded parts requiring nominal mechanical strengths and excellent electrical properties. This material comes in pelletized form an d in grades suitable for injection, transfer or compression molding.

Toray MS-4H is a 25.4 mm (1”) carbon fiber/epoxy resin compression molding system using high strength standardmodulus (HS) carbon fiber. MS-4H is an excellent low-cost, high performance molding compound that has been qualified to military and commercial Applicationss. It has excellent out time stability and processes very well in medium-to-large heavy parts. 138°C (280°F) Fast Cure Standard-Modulus Compression Molding System

Resinoid 1550 is a milled glass and mineral reinforced, two-step phenolic molding compound offering good mechanical properties. This product has been specifically formulated at a 2.47 specific gravity. This material comes in pelletized form and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

Haysite Reinforced Plastics 20000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

StarPCS™ SBMC-998 are carbon fiber reinforced molding compounds containing a discontinuous carbon fiber, a specially formulated StarPCSTM polycarbosilane resin, and refractory particulate. SBMC-900 and SBMC-998 can be used in the cured state, but are specifically designed for use as a ceramic matrix composite (CMC) thermal or mechanical structure.

Toray Toray Cetex® MC1100 PPS is a thermoplastic bulk molding compound (BMC) based upon Toray Cetex® TC1100 PPS thermoplastic uni-directional tape. Toray Cetex® MC1100 PPS is offered on standard-modulus fibers in lengths of up to 25.4 mm (1”). Intermediate-modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. Many composite compression molded parts are used to replace metal parts for weight savings or replace plastic injection molded parts where higher strengths or stiffness are required. Toray Cetex® MC1100-4A, PPS, 25.4 mm (1”) represents standard-modulus AS-4 fiber chopped to 25.4 mm (1”) in length.

Resinoid 1528 is a glass and mineral reinforced, two-step phenolic molding compound offering good mechanical properties. This product has been specifically formulated for use in automotive applications. This material comes in pelletized form and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment

Resinoid Compound 1322 is a glass reinforced, two step molding compound. It may be preformed. Recommended for transfer, injection or compression molding

Mar-Bal MB1000-15 is designed for powder coating and electrostatic painting applications.

Resinoid 2002-C5 is a fabric reinforced, two-step phenolic molding compound. It has improved heat distortion and dimensional stability. It has been formulated to exhibit excellent wear resistant properties. It is available in bulk form and is recommended for compression or transfer molding.

Mar-Bal MB2000-10 is an excellent flame and track resistant material possessing outstanding electrical and mechanical properties.

Verkid® BMC PX4 is a fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives. Generally thermoset unsaturated polyester or vynil-ester resins are used as organic matrix. With the aim of enhance its characteristics and improve its transformation, other components are added: catalysts, inhibitors, thermoplastic additives, demoulding agents, thickeners and pigments.

Urochem Molding Compound 162 by BI-QEM is a highly refined cellulose filled urea formaldehyde resin. It is modified with special purpose additives, pigments, cure regulators and lubricants. It offers high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It exhibits low shrinkage, low water absorption and high strength. It provides excellent electrical properties and resistance against surfactants & weak bases. It can be processed by compression molding. Urochem Molding Compound 162 is recommended for electrical accessories (typically faceplates). The molded products can be recycled and exhibits good UV stability with good moisture resistance. Its shelf life is of 12 months below 20°C.

Mar-Bal MB3000-20NY is a superior chemical-resistant material with excellent flame and track resistance.

menzolit® BMC 1100 is a bulk molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.