Products in Polymers & Resins: Vacuum Infusion Processing (VIP)

DISTITRON® I 100 SV1,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through vacuum infusion method.

Polynt Group 777-5405 - low color RTM resin with excellent cure and barcol hardness development; shrinkage in the molded parts is low and gives excellent cosmetic properties. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Rhino Linings USA, Inc. 1320 Resin is a Ultra Low Viscosity Epoxy Resin. Ultra low viscosity epoxy for infusion. Used for producing composite laminates using injection or vacuum infusion techniques at ambient temperature.

PRF Composite Materials RS-M135 is an ultra low viscosity laminating system formulated for use in the manufacture of composite components from glass, carbon and aramid fibers. The system is suitable for components requiring high static and fatigue strength properties using injectin molding (e.g. RTM), vacuum infusion and pultrusion processes. At 25°C the mixed viscosity is approximately 200 mPa s and may be lowered further to a value of 100 - 150 mPa s by warming the resin (see page 5), thus even complicated parts with long flow paths can be injected without difficulty. With a mold temperature of around 30°C, the temperature rise with hardener RS-MH137 remains very slight, allowing thicker parts to be built at elevated temperatures.

Norsodyne® PT-204T - isophthalic resin for hot curing, heat resistance. Main applications areas are building and construction etc.

RAKU® TOOL EL-2203 has a viscosity range of 400 – 700 mPas, is low in viscosity, has excellent wetting properties, and gels well at room temperature.

Biresin® CR80 is a low viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 80°C.

EPOLAM 2022 is a Variable reactivity by addition of an accelerator Tg ~80°C

Lerpol 512 is a VinylEstyer resin for infusion. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

Enydyne® I 700-A - preaccelerated, low viscosity, low shrinkage, non thixotropic, high reactivity. High solids with good wettability. Low styrene emission. Main applications areas are composites, marine, mass transports etc.

Stypol® 040-8085 - pre-promoted unsaturated polyester resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group Xycon 047-8023 - pre-promoted urethane ester, thermosetting hybrid resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group 747-5025 - isophthalic RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

NORSODYNE® I 99282 TFA - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in injection molding,rtm,vacuum infusion method.

Polynt Group 752-4420 is general purpose RTM resin with rapid cure rate for increased mold turn over; good profile; UL 94 V-O and 5V listed product; class I flame-retardant without additional additives; meets mil-r-7575c requirements for grade a applications. Main applications areas are aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports, railway sector etc.

ARMORSTAR VE IVSXH210 is generally used in Automotive,Building and Construction,Composites,Industrial sector,Marine,Mass Transports,Mold manufacture applications.

NM Infusion 693 is an extremely low viscosity two pack epoxy system, suitable for infusion processes with demands on high TG. NM Infusion 693 has a very low vapor pressure and can be considered as odorless. Vacuum causes no gas bubbles.

Biresin® CR120 is a low viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites with thermal performance up to 120°C

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

Stypol® RGPS1100 - pre-promoted orthophthalic RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Stypol® 040-8006 - unsaturated polyester closed molding resins for RTM. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Stypol® 040-8084 - pre-promoted unsaturated polyester closed molding resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Stypol® 040-8117 - high performance, low shrink resin for infusion. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

STYPOL® 040-8003 is a pre-promoted,flame-retardant polyester resin containing styrene monomer. It is especially formulated for production of reinforced plastic products using resin transfer molding (RTM). Certain applications with specific flame-retardant needs may require the addition of methyl methacrylate (MMA) and modest amounts of alumina trihydrate or antimony oxide/ammonium dimolybdate.

NM Laminering 650 is a two pack, solvent‐free, epoxy laminating system with a high TG and very high strength values. Wetting and adhesive properties are very good to all kind of fibers.

Stypol® RSCA1500 - high performance, shrink controlled LRTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

PRF Composite Materials RS-L285 has very low mixed viscosity, ensuring a fast and complete impregnation of reinforcement fibers without drainage on vertical surfaces. The addition of fillers such as colloidal silica, microballoons, metal powder etc., is also acceptable to obtain special properties. The RS-L285 epoxy resin system exhibits good mechanical properties after curing at room temperature. If high temperature strength (≥ +60°C) or aircraft approval is not required, finished products made with the selection of hardener RS-H285 may be used without further heat treatment. Post curing (heat treatment) will further enhance the mechanical properties and will also increase the high temperature strength, up to 100°C being achievable depending on the selected hardener and post cure cycle used. The properties indicated in this document may only be achieved by curing/post-curing above 50°C.

Polynt Group 777-8685 is general purpose RTM and infusion for slower cure rate and good profile. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group 747-6105 - low color, general purpose RTM resin with rapid cure rate for increased mold turnover. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group 730-2295 - low profile resin for infusion and RTM applications; cosmetic or Class A finish. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Lerpol 312 is a IsoPhtalic resin for infusion. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

RAKU® TOOL EH-2952-1 has a viscosity range of 400 – 700 mPas, is low in viscosity, has excellent wetting properties, and gels well at room temperature.

Stypol® 040-8123 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

NORSODYNE® I 16319 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in vacuum infusion,injection molding,rtm method.

Biresin® CR83 is an epoxy resin system with extremely low viscosity designed specifi cally for the infusion process for the production of high performance fiber reinforced composites parts and molds. The system has thermal properties up to 80°C. Biresin® CR83 epoxy resin has a low tendency to crystallize.

ARMORSTAR VE IVEXM120 - Vinyl esterDCPD blend infusion resin. Main Applications areas are Agrochemical,Agrobusiness,Automotive,Building and Construction,Composites,Industrial sector,Marine,Mass Transports etc.