Products in Composite Materials: Reinforcement

Composite Materials Reinforcement B is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weightpowerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weight

MultiTech MultiFunctional K is a natural raw cellulose. MultiTech MultiFunctional K is a beige colored softwood product with a cubic structure. The main particle range is 70-150 µm. It is a sustainable material for various applications as reinforcement and functional filler.

Composite Materials Reinforcement A is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

DiTech Reinforcement is an ultrafine mat of polyacrylonitrile produced by electrospinning. This product is a free standing flexible sheet with microstructural features not available from a bulk material. The fine scale of fiber diameters produces a membrane material with an inherently high surface area to volume ratio. The interconnected irregular shape pores within the fibers largely increases the pore volume (porosity) and accessible surface area.

MultiTech Fiber Reinforcement is right from the stalk of the hemp plant. Its known as the bast or outer bark fiber of the hemp stalk.

HDK® T30 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30 is a white colloidal powder of high purity. It finds application in inkjet paper, make-up, powder coatings, printing inks, and rheology control.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FPC 9230 is Oxidized PAN fiber, in a discontinuous chopped fiber form. The OPAN fiber is rated at >45 LOI, is an excellent fire retardant textile fiber with effective heat blocking and fire barrier properties. These fibers are ideal for economical processing into fire retardant nonwoven fabrics and felts for furniture upholstery, carpet underlayment, high temperature furnace insulation, and other related applications without the addition of harmful chemicals. OPAN fibers can be considered for replacement of meta-aramid fiber based insulations for improved properties. FPC 9230 does not burn, melt or drip, instead the fibers char and will self-extinguish. FPC 9230 is also an effective acoustical insulation fiber.

Mineral Wool Fibers Are Inorganic Synthetic “Wool-Like” Fibers Comprised Mainly Of Silicates Of Calcium, Magnesium, And Aluminum.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Hemp hurd fiber are the inner-core fiber of the hemp stalk. This is the woody, soft part of the hemp stalk. It’s what’s left over when the bark fiber is removed.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

Electrospun PVDF-HFP is an ultrafine mat of poly(vinylidene fluoride-co-hexafluoropropylene) produced by electrospinning. This product is a free standing flexible sheet with microstructural features not available from a bulk material. The fine scale of fiber diameters produces a membrane material with an inherently high surface area to volume ratio. The interconnected irregular shape pores within the fibers largely increases the pore volume (porosity) and accessible surface area.

USA Long Hemp Fiber 5" is right from the stalk of the hemp plant. It’s known as the bast or outer bark fiber of the hemp stalk.

Mineral Wool Fibers Are Inorganic Synthetic “Wool-Like” Fibers Comprised Mainly Of Silicates Of Calcium, Magnesium, And Aluminum.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

Hemp Hurd Powder 0.6mm is used as a filler in plastics, alternative to wood dust products, used for paper products, absorbent materials and more.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Hemp Hurd 1/4 in is great for many applications such as animal bedding and hempcrete among others. hemp hurds are the inner-core fiber of the hemp stalk. This is the woody, soft part of the hemp stalk. It’s what’s left over when the bark fiber is removed.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.