Products in Additives: Reinforcement

HDK® T30 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30 is a white colloidal powder of high purity. It finds application in inkjet paper, make-up, powder coatings, printing inks, and rheology control.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

Fiberglass conductive roving is composed of multiple ends of continuous filament yarn, which have been treated with a coating, which imparts electrical conductivity. The roving is provided with an overwrap of uncoated, twisted continuous filament yarn to maintain the integrity of the roving bundle. This over wrap is available in a single over wrap (B4, B5, B10, B13) and a double over wrap format (BX10, CX19).

SPECTER™ Monofilament Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, ASTM D7508/D7508M “Standard Specification for Polyolefin Chopped Strands for use in Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.

PLEXUS™ 44F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO’s PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”.

Fiberglass conductive roving is composed of multiple ends of continuous filament yarn, which have been treated with a coating, which imparts electrical conductivity. The roving is provided with an overwrap of uncoated, twisted continuous filament yarn to maintain the integrity of the roving bundle. This over wrap is available in a single over wrap (B4, B5, B10, B13) and a double over wrap format (BX10, CX19).

GENESIS™ XF Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

Fiberglass conductive roving is composed of multiple ends of continuous filament yarn, which have been treated with a coating, which imparts electrical conductivity. The roving is provided with an overwrap of uncoated, twisted continuous filament yarn to maintain the integrity of the roving bundle. This over wrap is available in a single over wrap (B4, B5, B10, B13) and a double over wrap format (BX10, CX19).

Fiberglass conductive roving is composed of multiple ends of continuous filament yarn, which have been treated with a coating, which imparts electrical conductivity. The roving is provided with an overwrap of uncoated, twisted continuous filament yarn to maintain the integrity of the roving bundle. This over wrap is available in a single over wrap (B4, B5, B10, B13) and a double over wrap format (BX10, CX19).

Performax™ HT are manufactured from a blend of 100% virgin polyolefin resins. PERFORMAXTM HT Synthetic Macro Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

GENESIS™ Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, ASTM D7508/D7508M “Standard Specification for Polyolefin Chopped Strands for use in Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

PERFORMAX™ Synthetic Macro Fibers are manufactured from a blend of 100% virgin polyolefin resins. PERFORMAX™ Synthetic Macro Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

PLEXUS™ 54F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO’s PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”.

SPECTER™ HP Synthetic Micro Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ HP Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.

SPECTER™ 3.5 Synthetic Micro Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ 3.5 Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.