Products in Pigments & Colorants: High Gloss

HALOX® 430 JM is a non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 JM is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

HALOX® SZP-391 JM is an efficient and versatile corrosion-inhibiting pigment. It is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SZP-391 JM is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride-based latexes and is recommended for use in a wide variety of resin systems.

Ti-Pure™ R-960 Coatings is a rutile titanium dioxide pigment manufactured by the chloride process. It is designed for use in applications requiring outstanding chalk resistance, gloss retention, and tint retention. In addition to excellent exterior durability, Ti-Pure™ R-960 provides very good dispersion with excellent hiding power and color acceptance.

Syntran® OP 1133 is based on Interpolymer Corporation's "opaque polymer" technology, which can be used to replace a percentage of the titanium dioxide used in white paints while maintaining the same or similar coverage. The ideal reduction level of titanium dioxide is approximately 15% when using this technology. Higher reductions of titanium dioxide levels can be achieved, but you may experience a slight loss in the coverage of the paint.

DCL 2792 Metal Azo Red, PR.48:4 is a very intense, medium performance blue shade red pigment, designed to be yellower in shade than DCC Red 2790. It is laked with manganese, which improves its stability, resistance properties, and increases its chroma, opacity, and gloss. Its good to excellent solvent resistance makes it well-suited for fast air drying and oven-cured industrial applications.

DCL 3GMX-SI Bismuth Vanadate, PY.184 is a bright, green-shaded yellow pigment with stir-in dispersing properties. DCC Yellow 3GMX-SI has the highest color strength, gloss, and opacity versus traditional grades. DCC Yellow 3GMX-SI is especially suitable for automotive, industrial, and decorative paint applications.

DCL 4GMX Bismuth Vanadate, PY.184 is a very green shade yellow pigment with the highest color strength, gloss, and opacity versus traditional grades and very good durability properties. DCC Yellow 4GMX is especially suitable for industrial and decorative paint applications.

DCL Yellow 83P Diarylide Yellow, PY.83 is a red shade yellow pigment with excellent gloss and transparency in solvent based inks. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of ink applications.

DCL 7336 Benzimidazolone Orange, PO.36 is a high performance blue shade orange pigment, ideal for use in high-end coating applications that require excellent weather fastness, heat stability, chemical resistance, rheology, and dispersion. It is suitable for use in all coatings but is particularly recommended for the most demanding applications.

DCL 1243 Diarylide Yellow, PY.83 is a red-shade diarylide yellow pigment specially formulated for use in nitrocellulose, polyamide, and polyurethane solvent-based inks. This product offers excellent transparency, high gloss, and strong tinting strength, making it ideal for applications in solvent-based inks.

Ti-Pure™ R-706 is a universal rutile titanium dioxide pigment, manufactured by the chloride process. It is designed to deliver both high gloss and excellent durability in coatings. This outstanding combination of end-use performance properties makes it a versatile pigment in solvent and waterborne systems for architectural, industrial, and automotive applications.

DCL 2096 Bismuth Vanadate, PY.184 is a bright, greenish-yellow pigment with high gloss, opacity, and durability compared to traditional grades. It is especially suitable for decorative, industrial, and powder coating applications due to its high color strength, high gloss, clean shade, and easy dispersion, which offer significant advantages in terms of formulation flexibility and value.

DCL 2097 Bismuth Vanadate, PY.184 is a very green shade of yellow pigment with high gloss and opacity, better than traditional grades; it has excellent durability properties and is especially suitable for decorative, industrial, and powder coating applications due to its high color strength, high gloss, and clean shade, as well as its easy dispersion, offering significant advantages in terms of formulation flexibility and best value in use.

Ti-Pure™ Select TS-6200 is a rutile pigment manufactured via Chemour’s chloride process. Designed specifically for the most demanding durability applications, Ti-Pure™ Select TS-6200 offers excellent gloss retention coupled with unique dispersing capabilities. This grade is part of the Ti-Pure™ Sustainability (TS) product series, which features a sustainability-driven value proposition and supports our aspiration to become the most sustainable TiO2 enterprise in the world.

ECOTINT® TO® TRANSPARENT RED OXIDE TR is the latest generation of binder-free universal colorant for interior and exterior applications. It is resistant to drying out and ideal for POS tinting utilizing environment-friendly, low-VOC technology (VOC <1 g/l). This product is very finely ground, making it exceptionally suitable for wood varnishes and gloss paints. At the same time, the transparent colorant does not affect important physical properties of the paint, such as weather resistance and UV barriers. Tight quality specifications of ECOTINT® TO® transparent oxides make it possible to use them both volumetrically for POS and gravimetrically for in-plant use.

ECONYL® BLUE BL1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® WHITE WX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OR1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BIVA YELLOW YX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW OXIDE YX3 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OXIDE YOX are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® GREEN GR1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BLACK OXIDE, BKX are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BLUE BL4 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® ORANGE OR2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED RLF are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® TO® TRANSPARENT YELLOW OXIDE TY is the latest generation of binder-free universal colorant for interior and exterior applications. It is resistant to drying out and ideal for POS tinting utilizing environment-friendly, low-VOC technology (VOC <1 g/l). This product is very finely ground, making it exceptionally suitable for wood varnishes and gloss paints. At the same time, the transparent colorant does not affect important physical properties of the paint, such as weather resistance and UV barriers. Tight quality specifications of ECOTINT® TO® transparent oxides make it possible to use them both volumetrically for POS and gravimetrically for in-plant use.

ECONYL® YELLOW YHF are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® MAGENTA MG1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® BLACK BK1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED OXIDE RX1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® YELLOW YE2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® VIOLET VL1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED RD1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED SCARLET RHF are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® RED OXIDE RX2 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.