Products in Additives: Flame Retardant

VISIOMER® PEG 200 DMA (polyethylene glycol 200 dimethacrylate) is an aliphatic dimethacrylate monomer with low viscosity, making it an excellent choice as a co-monomer to enhance the mechanical properties and chemical resistance of resins. This label-free monomer finds applications in a variety of industries, including 3D printing, adhesives and sealants, coatings, composites, construction and, personal care.

SABIC's Specialties Business NORYL PPE 630 powder is a medium molecular weight polymer based on Polyphenylene Ether (PPE).This material is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers such as Styrenic Block Copolymers. PPE 640 powder can be used to improve properties (i.e. Heat Distortion and Creep Resistance). It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The powder is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL PPE 646 resin is a high molecular weight polymer based on Polyphenylene Ether (PPE). This material is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers such as Styrenic Block Copolymers. PPE powder can be used to improve properties (i.e. Heat Distortion and Creep Resistance). It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL PPE 640 powder is a medium-high molecular weight polymer based on Polyphenylene Ether (PPE). This material is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers such as Styrenic Block Copolymers. PPE powder can be used to improve properties (i.e. Heat Distortion and Creep Resistance). It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Portaflame® SG 100 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® CA 25 grade is produced from carefully selected colemanite, which is a naturally occurring hydrated calcium borate. This light gray powder is odorless and decomposes at 340°C. It is used as a flame retardant for paints, polymers, rubber, and bitumen.

Portaflame® SG 10 LSA is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 10 LSA is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. It is not a dangerous substance (DSD or CLP) and does not contain substances of very high concern (SVHC), including their fire decomposition products.

Portaflame® SG 55 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Securoc® C10 F12.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Portaflame® SG 63 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Securoc® C10 F13.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Portaflame® CA 38 grade is produced from carefully selected colemanite, which is a naturally occurring hydrated calcium borate. This light gray powder is odorless and decomposes at 340°C. It is used as a flame retardant for paints, polymers, rubber, and bitumen.

Portaflame® SG 25 LSA is produced from carefully selected synthetic aluminum hydroxide (ATH). This range of Portaflame® LSA grades are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels in different polymer systems.

Portaflame® SG 10 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 10 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels.

Portaflame® SG 200 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® C 75 grade is produced from carefully selected colemanite, which is a naturally occurring hydrated calcium borate. This light gray powder is odorless and decomposes at 340°C. It is used as a flame retardant for paints, polymers, rubber, and bitumen.

Portaflame® SG10 LV-02 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® CA 7 grade is produced from carefully selected colemanite, which is a naturally occurring hydrated calcium borate. This light gray powder is odorless and decomposes at 340°C. It is used as a flame retardant for paints, polymers, rubber, and bitumen.

Portaflame® SG 55 LV are produced from carefully selected, synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG LV are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels. It is used to make flame retardant aluminum sandwich panels.

Securoc® C10 F11.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Securoc® D10 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® D10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Portaflame® SG 50 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG10 LV-01 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 30 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 30 LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 30 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels. Portaflame® SG 30 LV makes formulations that are flame retardant.

Dar-Tech Hauthane HD-2334 is a co-solvent-free, high-solids, flame-retardant, aliphatic polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests, including NFPA-701, MVSS-302, and others.

Dar-Tech Hauthane HD-2313 is a co-solvent-free, flame-retardant, aliphatic, aqueous polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame retardancy. This one-of-a-kind urethane dispersion is produced at high solids without the use of a solvent.

Securoc® C10 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Boratherm™ SG200 E is produced from carefully selected synthetic aluminum hydroxide (ATH). Boratherm™ SG-E grades are used in various applications because of their high thermal conductivity, flame retardancy, smoke suppression, and low viscosity. Combining these grades with finer products (ATH or Al2O3-based) makes it possible to obtain a high packing density, resulting in excellent thermal conductivity. Boratherm™ SG is perfectly suited for formulations needing good flowability. It is specially designed to offer an ultra-low surface area and large particle sizes.

Portaflame® SG 40 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 20 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 35 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Boratherm™ SG 200LVS is a blended product produced from carefully selected synthetic aluminum hydroxide (ATH). This product is used in applications where heat-dissipation and fire-retardancy are critical properties, e.g., in thermal interface materials (including electronic vehicle battery heat management), casting resins for power transformers, and potting and encapsulating materials in electric and electronic applications. The particle size distribution of the Boratherm™ SG 200LVS is already optimized, so blends with other finer or coarser aluminum-containing grades are no longer needed to obtain the optimum packing density, resulting in the right balance between flow and thermal conductivity.

Portaflame® SG 25 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Boratherm™ SG150 E is produced from carefully selected synthetic aluminum hydroxide (ATH). Boratherm™ SG-E grades are used in various applications because of their high thermal conductivity, flame retardancy, smoke suppression, and low viscosity. Combining these grades with finer products (ATH or Al2O3-based) makes it possible to obtain a high packing density, resulting in excellent thermal conductivity. Boratherm™ SG is perfectly suited for formulations needing good flowability. It is specially designed to offer an ultra-low surface area and large particle sizes.

PhosGard® MPP-Poly takes the form of a high-purity melamine polyphosphate with excellent thermal stability, showcased by its fine white powder appearance. This product proves to be an effective non-halogenated flame retardant, finding utility in water-based coatings, polyurethanes, thermosets, and polyolefins.