Products in Non-Food Consumer Packaging: Filler

MultiTech MultiFunctional K is a natural raw cellulose. MultiTech MultiFunctional K is a beige colored softwood product with a cubic structure. The main particle range is 70-150 µm. It is a sustainable material for various applications as reinforcement and functional filler.

VINNEX® 2505 is a vinyl acetate-ethylene-vinyl ester copolymer known for its soft and flexible characteristics, attributed to its relatively high ethylene content. The resin has a glass transition temperature below the freezing point. This product is commonly used in applications such as blending with natural fibers or flours like wood, starch, and cork. Additionally, it is highly recommended for modifying biopolymers and their compounds.

Boratherm™ SA 0380 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

Boratherm™ SA 0020 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

Boratherm™ SA 0700 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

Boratherm™ SA 0080 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

Boratherm™ SA 0050 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The MBD 50699 is a masterbatch containing 70% of extra-lamellar talc based on a polypropylene resin. This masterbatch can be used in dilution during the extrusion of compounds or directly in injection molding. For SDS, please contact Addiplast Group using the 'Request Document' button.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

GEMATILEN® BK60 HD is 60% Calcium carbonate filled PE. It is an off-the-shelf compound filler masterbatch. It is from 50% to 80% Calcium Carbonate (Chalk, CaCO3) filled LLDPE based compound. The product has been engineered specifically for FILM and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% or 40% depending on the application.

Cromex PE-CG 13357 is used in blow molding, films, injection and thermoforming.

REV Materials 93% Talc filled Polyolefin (8001) is a masterbatch in a polyolefin matrix suitable for let down in compounding, molding or extrusion applications.

Jordan Mineral Est JM100N is a natural ground calcium carbonate powder produced from microcrystalline rhombohedral high purity white limestone.

Jordan Mineral Est JM250N is a natural ground calcium carbonate powder produced from microcrystalline rhombohedral high purity white limestone.

REV Materials 90% Lightweight Talc filled Polyolefin (8011) is a 93% lightweight talc masterbatch in a polyolefin matrix, suitable for let down in compounding, molding or extrusion applications.

GEMATILEN® BK70 HD is 70% Calcium carbonate filled PE. It is an off-the-shelf compound filler masterbatch. It is from 50% to 80% Calcium Carbonate (Chalk, CaCO3) filled LLDPE based compound. The product has been engineered specifically for FILM and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% or 40% depending on the application.

Jordan Mineral Est JM5C is a surface coated ultrafine ground calcium carbonate powder with excellent dispersion produced from microcrystalline rhombohedral high purity white limestone.

REV Materials 20% Wollastonite filled PP (8008-001) is a 20% wollastonite dispersed in a polypropylene matrix, suitable for injection molding applications.

Jordan Mineral Est JM2SFN is a natural superfine ground calcium carbonate powder with excellent dispersion produced from microcrystalline rhombohedral high purity white limestone.

Cromex PP-CG 50020 is used in blow molding, blown and cast film, injection molding, thermoforming and extrusion.

Jordan Mineral Est JM130N is a natural ground calcium carbonate powder from microcrystalline rhombohedral high purity white limestone.

Jordan Mineral Est JM200N is a natural ground calcium carbonate powder from microcrystalline rhombohedral high purity white limestone.

REV Materials 20% Cellulose filled PP (8010-001) is a 20% cellulose dispersed in a polypropylene matrix, suitable for injection molding applications.

CARBOMAX® BIO S65MC-IG is a new generation of patented masterbatch produced in pellet form and made of calcium carbonate and a blend of biodegradable polymers. The grade of calcium carbonate has been specially developed to be used in the bioplastics made from polyesters in order to promote the prevention of hydrolysis leading to degrade the mechanical properties of the products. Therefore, it is possible to substantially increase the rate of calcium carbonate in the films made of bioplastics.

Jordan Mineral Est JM10C is a surface coated ultrafine ground calcium carbonate powder with excellent dispersion produced from microcrystalline rhombohedral high purity white limestone.

GEMASTIREN® FK80 is 80% Calcium carbonate filled PE. These are used in thermoforming and injection molding applications. It is significantly lowers raw material overheads and are 80% more environmental friendly. They are widely used in the manufacture of injection molded products, extrusion products, thermoforming applications.

REV Materials 20% CaCO₃ filled PP (8002-001) is a 20% calcium carbonate dispersed in a polypropylene matrix, suitable for injection molding applications.

GEMATILEN® FK60 is 60% Calcium carbonate filled PE. The product has been engineered specifically for film and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% depending on the application.

Filkan Calcium Filler Masterbatches offers a wide range of products based on CaCO3 for use in blown films, moldings and therforming.

KS-8525 is a Very economical product. It is used in PS thermoforming and Injection molding.

Quality Minerals CALCIUM MASTERBATCHES contains high concentration of calcium carbonate with excellent whiteness based on polyolefin resins.