Products in Paints & Coatings: Epoxy Coating

Prolink PLR 23 ProLink Pacific Resin is a high performance, durable system with excellent resistance to yellowing caused by UV degradation. This system can be used as a substitute for any standard epoxy system. The system will cure at ambient temperature, but for use in thin films, allow the mixed system to sit until approximately 90°F before being spread thin. Curing at elevated temperatures or allowing long post-cures could also be used to achieve adequate working time.

Hunan Three-Ring Pigments Iron oxide yellow G313-310 have excellent physical and chemical properties. Strong hiding power, high tinting strength, soft color, stable performance, alkali resistance, stability to weak acid and dilute acid, excellent light and weather resistance, insoluble in water and organic solvents, excellent rust prevention Anti-ultraviolet and other effects.

MONORAL ED is an unique synthetic amide wax applicable to a wide range of solvent base synthetic resin coatings and develops an exceptionally strong and durable thixotropic structure. It is a Premium Amide Wax has Anti-sagging, Anti-settling Agent for OEM, Car refinish, Wood coating .

Anionic wetting and dispersing agent for inorganic pigments. Composition: Aliphatic polyether with acidic groups.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

ZemaSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Xylene, Toluene, Parachlorobenzotrifluoride (PCBTF/Oxsol 100®) and Tertiary Butyl Acetate (TBAc).

NYACOL APE1540 flame retardant additive is a dispersion of nano-sized (colloidal) antimony pentoxide particles in a liquid isophthalic polyester resin. The oxide particles are nearly 1/100 the size of powdered antimony trioxide.

MS Saraf Resins & chemicals Zirconium Octoate is commonly used for air drying, stoving finishes and as a catalyst for epoxy paints. Our Zirconium Chemical is free from any kind of contamination with foreign materials that assure its purity. Prepared as per the ISI quality norms, our Zirconium Chemical is reliable to use. We are counted among the supreme Zirconium Octoate Chemical Manufacturers in India.

CARDAMINE H 662 BX65 is one of a series of specially formulated phenalkamine curing agents developed for use with liquid and solid epoxy resins. This grade is pre-diluted in xylene. CARDAMINE H662BX65 is characterized by tolerant mix ratio, excellent hydrophobic character and subsequent corrosion resistance, good cure at low temperature and under adverse conditions with a high degree of flexibility and toughness.

Paladin Paints & Chemicals PEPOX 2325X65 comprised of our technologically designed one pack epoxy resins, provides customers with unique and novel cardanol based coating systems that exhibit superior corrosion resistance.

Super SAP® CCR/CCF is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low color and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications. This Super Sap® Formulation features two hardener speeds: slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.

SB-332 ground ATH that provides low cost flame retardance and smoke suppression, and arc-track resistance. The medium-fine particle distribution yields desirable flow properties, good physical properties and suspension characteristics required in SMC/BMC compression molding and many rubber compounds. Applications utilizing SB-332 includes SMC/BMC electrical switch gear, appliance electrical sheet and office equipment housings along with epoxies, polishes, adhesives and coatings. A complete range of surface modifications is available to aid processing and enhance physical properties.These include silanes, stearates and wetting agents. .

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

Genable® 3000 dispersion consists of graphene nanoplatelets stabilized in epoxy resin (EEW = 190g/eq.). The graphene nanoplatelets are a synthesized form of graphene produced by a patented process. A formulation-ready Genable® epoxy resin, Genable® 3000 dispersion has been developed to enhance the anti-corrosion performance of coatings on steel substrates by the use of a patented active, non-metallic anti-corrosion additive.

ADMAFINE SO-C4 is used in electronic devices, filler for epoxy molding compound, fillers for printed circuit boards. It is usesd as resin filling materials engineering plastics, filler for paint, filler for precise plastic molding. It is used in ceramics molding products and in anti-blocking materials.

Shandong Huijin Chemical 300 polyamide curing agent is vegetable oil and ethylene amine dimer acid synthesis.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

COATTUN Q.3 is a high quality Quartz, produced from deposits in the Cine-Milas region, Turkiye.

Nigtas 10 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Epoxy Paints, Marine Paints, Epoxy Paints, Static Powder Coatings.

WSCM-5110 has monofunctional reactive epoxy diluent, low viscosity, can improve toughness and water resistance, used in high solids or solvent-free systems.

RAYBO 60 NoRust is a versatile and extremely effective flash rust inhibitor. It contains both vapor phase and contact corrosion inhibitors. As a result, RAYBO 60 prevents flash rusting in latex systems intended for direct to metal application. It also provides corrosion protection to unlined cans.

AltroColor EP 2000 Color Pastes are based on a bisphenol A/F resin and have been developed particularly for the coloring of epoxy resin systems. As our AltroColor EP 2000 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your epoxy resin system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties. AltroColor EP 2021 is chrome green colored.

BRITOL 515 is used as General - Purpose Epoxy Polyamide Coating With Excellent Corrosion Resistance, Epoxy Adhesives.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

Super SAP® CCR/CCS is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low color and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications. This Super Sap® Formulation features two hardener speeds: slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.

Paladin Paints & Chemicals PEPOX 2800X65 comprised of our technologically designed one pack epoxy resins, provides customers with unique and novel cardanol based coating systems that exhibit superior corrosion resistance.

Kukdo Chemical KD-4014 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for applications of high performance powder coating, especially FBE(Fusion Bonded Epoxy coating). The most advantage of these products is that residual bisphenol-A content is the less than one percent by weight. Also, these products have excellent performance of block resistance, chemical resistance and mechanical properties.

Wetting and dispersing additive for solvent borne coating systems, biodegradable, VOC-free. SCHWEGO wett 6264 can be used to disperse inorganic and organic pigments or carbon black. It is especially suitable for the production of universal pastes and highly filled systems.

Hunan Three-Ring Pigments Iron oxide yellow G313 have excellent physical and chemical properties. Strong hiding power, high tinting strength, soft color, stable performance, alkali resistance, stability to weak acid and dilute acid, excellent light and weather resistance, insoluble in water and organic solvents, excellent rust prevention Anti-ultraviolet and other effects.

Alteo SH100 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

ACTAN® DU20 is an amine adduct in aqueous emulsion which is designed to optimize wet adhesion of two-component water-borne epoxy primers on non-ferrous substrates such as galvanized steel, alu-minium and its alloys. ACTAN®DU20 with its specific amine func-tionality provides excellent wet and dry ad-hesion at a cross-linking degree of 100%on metallic substrates and maintains the nec-essary water barrier to ensure long term protection with solid and liquid epoxy res-ins.

SB-336 is a medium particle size ATH product that provides low cost flame retardancy and smoke suppression in a variety of applications. The unique particle size is specifically designed for low viscosites, high filler loading levels, and excellent processing characteristics. SB-336 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, SMC/BMC, foam materials, and cast polyester and epoxy parts.

HT-S309 is a special process modification, with ultra-dispersive, high-touch denaturation of organic bentonite, products are suitable for low, medium and high polarity system, which in the medium and high polarity system without activator, rapid shear can be dispersed, low polarity system need to be used with small amount of activator in order to achieve better dispersion effect, Dispersion fineness can be less than Sum in a suitable system, where excellent tactile and anti-flow hanging is available.

AltroColor EP 2000 Color Pastes are based on a bisphenol A/F resin and have been developed particularly for the coloring of epoxy resin systems. As our AltroColor EP 2000 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your epoxy resin system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties. AltroColor EP 2045 is rose colored.

Defoamer for water-based and UV-curing coatings, free of silicone. SCHWEGO foam 6360 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate.

MICA-SOFT® 15/12 W is a wet-ground silky pure mica fine powder.