Products in Paints & Coatings: Curing Agent

WSCM-1201 has the viscosity is reduced and the operability is better.

Finomide 1115 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

Technicure® PDU-250M, N,N-dimethyl-N-phenyl urea, is a substituted urea. It is used as a dicyandiamide (DICY) accelerator in one-component epoxy resin based formulations. Typically the product is used with epoxy resin and dicyandiamide between 1-3 phr. The loading level of an accelerator will provide balance of low temperature reactivity and formulation shelf stability.

WSCM-1101X90 has the viscosity is reduced and the operability is better.

Vilacryl 848J60 is 2 pack isocyanate curing acrylics which is used in vehicle refinishing, anti graffiti coatings.

Omnirad 2100 is a highly efficient liquid curing agent to initiate radical polymerization of unsaturated resins after exposure to UV light such as those based on a prepolymer – e.g., acrylates and unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive thinners. It is well suitable for formulations in which Omnirad TPO is used. Omnirad 2100 provides all the handling advantages of a liquid product. In thicker coatings Omnirad 2100 offers improved bottom curing compared with that of Omnirad TPO. It is especially suitable for white-pigmented formulations with minimal yellowing after curing and for coatings with low pigment volume concentration. Therefore Omnirad 2100 can be offered in almost all applications as a one-to-one replacement for Omnirad TPO with certain advantages.

Jiangsu Sanmu 745M has light color, high luster, high cost-efficiency, very low free TDI content, good storage stability, easy extinction, and excellent rubbing property. It can be applied with alcohol acid, acrylic acid resin and other resin together. It applies to higher-grade furniture paint, etc.

PISTREAM™ P6892-1 is a chemical additive to increase the curing mechanism of applications.

CamCure 9069 by Champion Advanced Materials (Singhania Group) is a low viscosity curing agent. It is aromatic amine. CamCure 9069 is suitable for use in high chemical resistance coatings.

Finomide 1160 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

AFEX™ TG30C is a base drying Oil called as Tung having three conjugated double bonds.

Jiangsu Sanmu 740A has light color, ligh luster, good compatibility, high hardness, good dryness, high scratch resistance, good storage stability and excellent chemical resistance. It can be applied with alcohol acid, acrylic acid and other resin together. It applies to higher-grade matte paint and wood coatings primer, plastic paint, industrial paint, etc.

AFEX™ TG20C is a base drying Oil called as Tung having three conjugated double bonds.

WSCM-1301 has light color, high viscosity, solvent-free, fast curing speed.

CARPOL® EDAP-770 is an ethylene diamine initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 770. This tetrol is polymerized solely with propylene oxide and has a mild catalytic nature. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, Carpol® EDAP-770 can also be used as a curative for most C.A.S.E. applications.

Arnette Polymers 8100OXTA60 semi solid polyamide in exempt solvent blend. It is typically used in Fast dry, corrosion resistant primers, coatings.

LAPOX® AH-341 is a modified aliphatic amine having low viscosity and light color. It is recommended for high solid and solvent free coatings. It has got excellent resistance to amine blushing under humid conditions. Due to low viscosity it is capable of high filler loading and good wetting properties. This hardener offers better area coverage, long working time with good glossy films.

Dixie dodecenylsuccinic anhydride (DDSA) is a slightly viscous liquid anhydride. DDSA can be used as an epoxy curing agent for electrical potting compounds, coatings, conductive adhesives, and syntactic foams and also as an intermediate in the preparation of corrosion inhibitors for oils and greases. It cane be used as a leather tanning agent. When used as an epoxy-curing agent, it has a long pot life at room temperature and gives excellent electrical properties and flexibility to castings. DDSA can be used in blends with other anhydrides to modify physical properties of the mixture and to lend flexibility and reduce brittleness of cured polymers.

Arnette Polymers 8115OXT70 115 type polyamide in exempt solvent blend. It is typically used in VOC compliant primers, corrosion resistant coatings.

WSCM-1127 has light color, low viscosity, fast curing, good fluidity, good color retention, add benzyl alcohol.

Bubbling. It’s a problem which pops up time and time again, particularly in areas subject to low temperature and high humidity levels. Fortunately, under these conditions, Aldirez A provides the ability to create primers that remain remarkably resilient and bubble-free. In addition to its exceptional ability to inhibit CO2 generation, formulators are able to accelerate the cure of PU primers, to improve turnaround efficiency, whilst retaining a workable pot life.

Pacapol™ L2000NCX is isocyanate capped polycarbonate polyol. Can be used directly as a single component coating, or as an isocyanate curing agent.

AFEX™ LN23C is a base drying Oil called as Linseed having two conjugated double bonds.

Shandong Huijin Chemical T-60 is cardanol replace or part replace phenol, via mann nice reaction, modified EDA to create epoxy curing agent.

AFEX™ TG23C is a base drying Oil called as Tung having three conjugated double bonds.

Kumho P&B Chemicals KCA 2300 is designed for paint, adhesives, heavy duty coatings. grouting, mortar, flooring. etc. Each KCA series has different properties for the various demands. Epoxy curing agents are used to cure epoxy resins by reacting with the epoxide groups or by promoting self-polymerization of the epoxy by catalytic action. Application characteristics and final physical properties can be tailored by the choice of curing agent. Kumho P&B Chemicals offers epoxy curing agents for a wide variety of coatings applications.

Curamine 30-508 is a conventional amido-amine with lowest imidazoline content and relatively short pot-life.

MACRI CHEMICALS CURING AGENT HAA HH8080 is an additive suitable for polymerization with carboxylic terminated polyester resins or acrylic resins to produce high durability outdoor powder coatings with excellent mechanical properties. Compared to TGIC it is non-toxic and can be used to produce safe and non-irritating powder coatings for outdoor use.

Drolite™ 9041 is a phenalkamine used as a curing agent for various Epoxy Resins. Specially for marine coatings and other industrial applications.

AFEX™ LN30C is a base drying Oil called as Linseed having two conjugated double bonds.

AFEX™ SB23C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

Huangshan Huahui Technology N,N,N’,N’-Tetrakis (β-hydroxyethy) Adipamide HH8080 is a tetra-functional group containing N,N,N',N'-Tetrakis (B-hydroxyethy) adipamide (HAA). It is suitable for curing with carboxyl-terminated polyester or acrylic resin to produce exterior durable powder coatings with excellent mechanical properties and good weather durability. In comparison with TGIC, it's non-toxic, and can be used to produce non skin irritant and safe outdoor powder coating.

EPOTUF® 37-680 is an amine-functional emulsion which can be used to formulate two-component, waterborne epoxy systems with properties that approach conventional solvent-based two-component epoxy coatings.

CARDAMINE H 658 is one of a series of specially formulated phenalkamine curing agents developed for use with liquid and solid epoxy resins. This grade is solvent free. CARDAMINE H658 is characterized by good reactivity and tolerant mix ratio, excellent hydrophobic character and subsequent corrosion resistance, good cure at low temperature and under adverse conditions with a high degree of flexibility and toughness.

Bright Associates (Bright Resin) D. G. Lacquer Part - A is suitably reacted to obtain A very high cross linking Density with PART - B and Diluted with one part of diluents Forming an ideal combination for Printing on Metalised Polyester Film by Flexo or Gravure Process. Used as Highly reactive butylated type curing agent for stoving paints, roller coatings and foil inks. Mar-proof varnishes, Acid catalyzed Wod finishes.