Products in Other Industrial Applications: Wear Resistant

Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

GERMAFORM 9 GK 30 is a polyoxymethylene (POM) copolymer material, which contains 30% glass beads. This product is available in Europe.

Inhance Fluoro-Seal UH-1500 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Seast NH is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

G-PAEK™ 1100ESG is Ultra high Performance thermoplastic polymer, virgin, semicrystalline granules suitable for stock shapes extrusion, easy flow, Beige in color.

GERMAFORM 9 is a polyoxymethylene (POM) copolymer material. This product is available in Europe.

VICTREX® 450G is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

G-PAEK™ 1200G is Ultra high Performance thermoplastic polymer, virgin, semicrytalline granules suitable for injection molding, easy flow, Beige in color.

Seast 5H is a variety of carbon black that is added to rubber to make it stronger and more res istant to wear. It is used in the rubber parts of industrial machines and various sizes and models of tire.

Devlon S-Grade has the highest molecular weight of any Devlon thermoplastic, Devlon S-Grade offers superior mechanical properties, rendering it our premium of all engineering grade thermoplastics. Particularly suited for larger sized components, it yields optimum performance in rigorous and abrasive applications at ambient temperatures.

TİSESTER F UNR F01 K04 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Impact Modified, Natural.

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

GERMAFORM 9 PTFE 15 is a polyoxymethylene (POM) copolymer material. This product is available in Europe. The main characteristics of GERMAFORM 9 PTFE 15 are: lubrication.

Ceramerplus 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Nycast® 6PA MoS2 is used in metal applications for lubrication and has delivered successful performance throughout the years. The main advantages of NYCAST 6PA MoS2are:.

In comparison with other thermoplastics, Murpec® has an exceptionally low thermal expansion coefficient. This property provides optimum dimensional stability and means that dimensions do not change even if used in wet environments. Because of the high glass transition temperature, the material’s rigidity and strength are retained almost in their entirety even at high temperatures. Murpec® materials are extremely resistant to deformation and exceptionally abrasion-proof. Production based on PEEK.

Inhance Fluoro-Seal UH-1080 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

VTEC™ BG21 is a High temperature resistance and it is Superior mechanical properties

Devlube is a self-lubricating material ideally suited for slow-moving, dry-running applications requiring low friction and where lubrication is not possible. Reduced wear through lower friction means excellent retention of physical properties and very little maintenance is required for this material.

GERMAFORM 13 PTFE 18 SI 2-6940 is a polyoxymethylene (POM) copolymer material. This product is available in Europe. The main feature of GERMAFORM 13 PTFE 18 SI 2-6940 is: lubrication.

Original Material "S" plus+® AB contains special substances that prevent the growth of bacteria and other microbes at the same time as protecting the environment and people. The material is thus ideally suited for use when manufacturing and processing foods. It can reduce the growth of microbes on surfaces by between 99.96 to 99.99% in comparison with materials with no special additives. This means that it can virtually eradicate unpleasant smells and the formation of biofilm. Original Material "S" plus+® AB combines antibacterial properties with exceptional characteristics of the "S" plus+® family. A member of the S plus family Production based on PE-UHMW SG 1.2.

The integration of 25% carbon increases the wear resistance, hardness, and creep strength of this material. Murflor®+ Carbon is used, for example, when electrical conductivity is required and Original Material "S"® Black Antistatic cannot be used because the ambient temperature is too high. Production based on PTFE-C.

Flontech PTFE FT-GR15-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Inhance Fluoro-Seal UH-1150 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

TİSESTER F UNR F01 K02 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural.

This material results from the further development of a tried-and-tested material. Experiences of over 50 years of producing Original Material "S"® have contributed to the development of this material. This involved improving already impressive material properties. For example, the self-lubricating character of this material has resulted in an improved sliding friction coefficient in comparison with Original Material "S". Original Material "S" 8000® is ideally suited for use in sliding guides, slide segments, and slide bearings.

GERMAFORM 9 MF 10 is a polyoxymethylene (POM) copolymer material that contains 10% mineral fillers. This product is available in Europe.

TİSESTER F 25D03 F01 K02 HS R01 is a PBT, 25% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compliance), Heat Stabilized, Natural.

Murinit® SP [FS], thanks to the low fiber content and integrated solid lubricant, this high-performance material offers an excellent combination of good slide and wear behavior, high strength, and dimensional stability – even at high temperatures. Murinit® SP also has a good resistance to chemicals and hydrolysis.Production based on PPS-SP.

G-PAEK™ 1100G is Ultra high Performance thermoplastic polymer, virgin, semicrystalline granules suitable for injection molding, easy flow, Beige in color.

Inhance Fluoro-Seal UH-1035 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

"Industrial applications are often subject to high temperatures at which Original Material ""S""® could previously not be used. Such applications require materials with familiar characteristics such as wear, impact, and chemical resistance. The new Original Material ""S"" plus+® TLS now offers - for the first time - a material that can be used in situations for which Original Material ""S""® was not suited. Even at high operating temperatures of up to120°C for short periods of time and constant service temperatures of up to100°C, the molecular structure of this ultra-high molecular weight low-densitypolyethylene does not change. This is because the thermal oxidation point has been increased through the use of a newly developed additive. ""S"" plus+® TLS is thus suitable for a wide range of industrial applications that are subject to sustained high temperatures." A member of the S plus family Production based on PE-UHMW SG 1.1.

PAR Group Nylon 6 Metal Detectable Sheet is a popular engineering plastic due to its ease of machinability. It combines high strength, stiffness and hardness properties with good creep and wear resistance. Our highly visible blue metal detectable Nylon 6 contains very fine material additives making it detectable to most metal detector equipment. It also has lower moisture absorption than standard nylon 6.

GERMAFORM 9 GF 10 is a polyoxymethylene (POM) copolymer material, which contains 10% glass fiber reinforced material. This product is available in Europe.