Products in HI&I Care: Dispersant

DARVAN® 7-N Dispersing Agent is a sodium polymethacrylate dispersant in solution. It is very effective for dispersing mineral fillers in latex paint formulas.

DeTERGE CS - 45LF is an exceptional, cost-effective, low-foaming surfactant resistant to chlorine. It's formulated for products containing up to 15% active caustic and other alkaline electrolytes. Chemically classified as an alkoxylated carboxylate, it's intended solely for use in alkaline systems and not recommended for acid systems.

Kemsurf EM30 is an APE free alcohol ether sulfate. Kemsurf EM30 has a wide range of applications such as; foam stabilizers in liquid detergents; primary detergent and foaming agent in Industrial and Institutional cleaning formulations; general foaming agent; dispersing agent; emulsion polymerisation. Typically this product is used in emulsion polymerisation systems as a performance replacement for nonyl phenol ether sulfates.

Lansurf CDE-G is a coconut diethanolamide produced via the reaction procedure that gives a product containing some free glycerol. This product has good foaming stability, soil suspension and thickening properties and can be used as a foam stabilizer, detergent, emulsifier and dispersing agent.

Kemsurf EM9 is an AEP free Alcohol Ether Sulfate. Typically this product can be used in emulsion polymerisation systems as a performance replacement to Nonyl Phenol Ether Sulfates. Kemsurf EM9 has a wide range of applications such as; foam stabilizers in liquid detergents; primary detergent and foaming agent in Industrial and Institutional cleaning formulations; general foaming agent; dispersing agent; emulsion polymerisation.

Ariix Sodium Cumene Sulfonate 90% Powder is comprised of Sodium cumenesulphonate. It is commonly used as Anti Caking Agent, Coupling Agent, Dispersing Agent, Emulsifying Agent, Hydrotrope, Solubilizer and Cloud Point Depressant for a variety of applications in Industrial Cleaning, Household Cleaning and Other Personal Care.

Cola®Wet sulfosuccinates, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet sulfosuccinates are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Colonial SDS-40 is a sodium decyl sulfate for use in a variety of industries including industrial, institutional cleaning industry, fire fighting foams, emulsion polymers, and personal care. Colonial SDS-40 acts as a dispersing wetting agent and emulsifier

Cola®Wet surfactants are chemically classified as dialkyl sulfosuccinates.  These anionic surfactants provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet products are suitable for use in a broad range of applications such as wetting agents, detergents, agricultural, mining and textile products, as well as, emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Wet surfactants, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wet surfactants are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations.

Cola®Wet sulfosuccinates, chemically classified as dialkyl sulfosuccinates, are anionic surfactants that provide a wide variety of functional properties that include surface and interfacial tension reduction, wetting, dispersing, emulsifying, penetrating, and solubilizing. Cola®Wets are suitable for use in a broad range of applications such as wetting agents, in cosmetics, detergents, agricultural, mining and textile products, as well as emulsifiers/dispersants in water treatment, paint, ink and polymerization formulations. Cola®Wet MA-80 surfactant is an anionic surface tension depressant and an emulsifying, dispersing and solubilizing agent exhibiting high electrolyte tolerance. It promotes penetration and spreading of organic liquids as films.

Alcohols, C8-C10, ethoxylated propoxylated. Colonial DF-16 is a Low foam Wetting Agent.

Cola®Mine CDM is a modified 2:1 cocamide diethanolamide that functions as an excellent detergent and emulsifier. The amide, diethanolamine, and soap content vary in each Cola®Mine product depending on the intended function. Cola®Mine CDM provides excellent soil dispersing, potent wetting, good lubricity, and rust inhibition characteristics in hard surface cleaners, chain lubricants, and vibratory finishing compounds.

Lauramidopropyl Hydroxysultaine​. Cola®Teric LMHS is compatible with anionic, nonionic, amphoteric and cationic surfactants. When compared to lauramidopropyl betaine, Cola®Teric LMHS exhibits excellent dispersing, emulsifying, antistatic characteristics and better flash foam and viscosity building capacity with lauryl sulfates and alpha olefin sulfonates. Cola®Teric LMHS is stable over a broad pH range in both hard and soft water with excellent lime soap dispersing properties. Cola®Teric LMHS is fully biodegradable.

Cola®Nol 14 is a PEG-free distilled polyglycerol ester based on vegetable oleic acid. It is an excellent emulsifier enabling water and oil to mix with good heat and cold stability. Cola®Nol 14 is compatible with all kinds of cosmetic oils and active ingredients with very pleasant application properties.

Poly Suga®Mulse D9 is a PEG-free, nonionic fragrance solubilizer made from 100% biobased raw materials. It is hydrophilic, freely soluble or dispersible in water, and soluble in varying degrees in organic liquids. Poly Suga®Mulse D9 is used for oil-in-water (O/W) emulsification, dispersion or solubilization of fragrances and all types of oils. It is compatible with nonionic, cationic and anionic surfactants and is effective in systems with relatively high levels of electrolyte, acid, or base.

Cola®Mate OPV is a vegetable derived sulfosuccinate half ester of oleamide MIPA. It is a very mild surfactant to both eye and skin. When blended with high foaming anionic surfactants, this product will reduce irritation without significantly reducing foam. Cola®Mate OPV also responds readily to viscosity builders, such as, amides, betaines and salts.

Ariix Sodium Xylene Sulfonate 40% Liquid is comprised of Sodium xylenesulphonate. It is commonly used as Anti Caking Agent, Anti Fungal Agent, Cleansing Agent, Coupling Agent, Dispersing Agent, Emulsifying Agent, Hydrotrope, Solubilizer, etc for a variety of applications in Other Personal Care, Food Packaging and Household Cleaning. Key benefits in use include: Clarifying, Cleansing, Anti-blocking, Anti-caking, Dispersing, Emulsifying, Wetting, Anti-fungal, etc. It is available in Liquid form.

Ariix Sodium Cumene Sulfonate 40% Liquid is comprised of Sodium cumenesulphonate. It is commonly used as Anti Caking Agent, Coupling Agent, Dispersing Agent, Emulsifying Agent, Hydrotrope, Solubilizer and Cloud Point Depressant for a variety of applications in Industrial Cleaning, Household Cleaning and Other Personal Care.

DeIONIC 100-VLF is a unique, very low foaming, modified alkoxylated alcohol. This nonionic surfactant exhibits multifunctional characteristics including wetting and dispersing properties.

DeIONIC C-18 is a 100% active, high melting point (58°C), mixed chain length alcohol ethoxylate suggested for use in solid or block formulations, water-based lubricants, and dry blended detergents.

DePHOS 8028 Phosphate Ester exhibits excellent properties such as fast wetting, low foaming, and good wetting properties, making it suitable for a wide range of applications. Its versatility in both I&I cleaning and home care, along with its corrosion inhibition and scale inhibition properties, makes it a valuable ingredient in various formulations.

DePHOS 8028FA Aliphatic Phosphate Ester is designed for versatile applications. In industrial and institutional (I&I) cleaning, this ester functions as a corrosion inhibitor in both acid and alkaline cleaners, ensuring effective and safe cleaning. In home care, it excels in acid and alkaline cleaners, proving its efficacy in dish care, laundry, and various surface care applications.

DeMULS KE-75 is a readily biodegradable emulsifier for dibasic esters, kerosene and other solvents. Applications include kerosene emulsions, all-purpose cleaners & degreasers, solvent-based paint strippers, liquid laundry detergent, graffiti removers, etc. Effectively emulsifies combination solvent systems such as D'limonene and odorless mineral spirits into microemulsion concentrates.

Dequest® PB grades are eco-friendly products obtained by turning a natural substance into effective ingredients. The active component of Dequest® PB, Carboxymethyl inulin sodium salt, is obtained from a polysaccharide extracted out of chicory root (Inulin). Low toxicity, non-persistent character and natural origin ensure low impact on the environment. Hardness ions binding capabilities and dispersing properties make it an ingredient of choice for ecofriendly detergents.

Dequest® FS1502 is a polymer based high performance material that shows superior anti redeposition efficacy with resulting benefit on whiteness maintenance, in particular on polyester and polyester/cotton fabrics. By adding Dequest® FS1502 to detergents already containing Dequest® phosphonates can provide better anti incrustation and dirt anti re-deposition properties.

Dequest® P9310 is a sulfonated polyacrylic acid copolymer designed for optimal dispersion of phosphate and carbonate scales Dequest® P9310 can be used also in highly alkaline Industrial cleaners.

SPE 1436 is an eco-friendly material obtained by turning a natural substance into effective ingredients. The active component of SPE 1436, Carboxymethyl inulin sodium salt, is obtained from a polysaccharide extracted out of chicory root (Inulin). SPE 1436 is a powder for post addition and dry mixing and it keeps its flowability also in extreme conditions. It is an ingredient of choice for eco-friendly detergents.

It is a standard anionic surfactant. It is widely used as foam builder, wetting agent, surfactant, and dispersing agent in many applications. It is a highly concentrated sodium lauryl ether sulfate derived from natural fatty alcohols. Due to its high content of washing active substance, It is particularly suited for highly concentrated end products, or if raw materials with a lower water content are required.

Mosselman Amide KDO/T (68155-07-7, 8051-30-7, 68603-42-9) is a coconut diethanolamide obtained by the reaction of coconut oil with diethanolamine.

KEBOPLEX SP is a cleaning additive for highly alkaline solutions for cleaning evaporators in cane sugar factories.

AEROSOL® OT-85 AE SURFACTANT is a low VOC, high solids wetting agent, dispersant and emulsifier that is an extension of the extremely popular line of AEROSOL OT surfactants/wetting agents. It possesses the excellent equilibrium and dynamic wetting characteristics of the AEROSOL OT surfactants, combined with lower foam and higher electrolytic stability.

KEBOPLEX 105 is a disperser for the treatment of cooling water systems. It is used as scale inhibitors and dispersants for the pulp and paper industry. It is a versatile dispersing agent with excellent stabilizing and protective colloid effects.

D- EAGLE(SS44/45) is Sodium salt of polyacrylic acid with low molecular weight for detergent industry applications.Dispersing agent for industrial / institutional detergents applications.