Products in Parts & Components: Acrylics & Acrylates

Plastics Film B is a uv resistant far-rated sheet.

Super Shield™ Nickel Conductive Paint 841AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive nickel flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It also provides strong corrosion resistance and is suitable for use in marine environments. 841AR provides a conductive coating for the interior of plastic electronic enclosures that

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

Silver Conductive Pen 842AR-P pen dispenses an acrylic lacquer pigmented with highly conductive silver flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications where high conductivity is not required, the 838AR-P Carbon Conductive Pen and the 841AR-P Nickel Conductive Pen provide economical alternatives.

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

Nickel Conductive Pen 841AR-P pen dispenses an acrylic lacquer pigmented with conductive nickel flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications requiring lower resistance, use the 842AR-P Silver Conductive Pen. For a more economical alternative, use the 838AR-P Carbon Conductive Pen.

Silicone Modified Conformal Coating 422B is a 1-part, acrylic-silicone blend conformal coating that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in only 8 minutes. It may be removed with appropriate strippers or soldered through for repair or rework. 422B is designed for applications where both high service temperature and flexibility are required. It puts minimum stress on components during thermal cycling, making it ideal for applications that involve a wide temperature range. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.

422C is a 1-part, acrylic-silicone blend conformal coating that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in only 10 minutes. It may be removed with appropriate strippers or soldered through for repair or rework. 422C is designed for applications where both high service temperature and flexibility are required. It puts minimum stress on components during thermal cycling, making it ideal for applications that involve a wide temperature range. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

419E is a 1-part, UL 746E certified, acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419E creates a robust moisture barrier that protects printed circuit boards in humid environments. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

838AR-P pen dispenses an acrylic lacquer pigmented with conductive carbon. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs traces on keyboards, game controllers or remote controls. It is also good for making small connections, such as jumpers, through-holes, bridges, and links. It is great for drawing resistors too, and it can be used to increase the surface area of contacts by painting the area around them. Use this pen when high conductivity is not required. For applications requiring lower resistance, use the 841AR-P Nickel Conductive Pen or the 842AR-P Silver Conductive Pen.

RILY is specialty methacrylate, which has phenolic hydroxyl group. It has good rigidity, mechanical property and solvent resistance due to aromatic ring. It can be solved into several solvents as described below. It is well used in electronic material industry.

CGSTAPE - 7858 (1) is a CGS’s top coated white polyimide film for electronics labeling is coated with an aggressive acrylic adhesive and backed with a kraft release liner.

CGSTAPE - 8459 is a polyimide backing and acrylic adhesive offers outstanding thermal resistance and excellent electrical insulating properties. This tape is used where toughness, puncture resistance, extreme resistance to heat are required.

CGSTAPE - 8959 is a anti-static treated polyimide backing with a non-silicone acrylic adhesive offers outstanding thermal resistance andexcellent electrical insulating properties. This tapeis used where toughness, puncture resistance, extreme resistance to heat.

ECP 41899 is a proprietary injection molding compound utilizing special polymer alloys to give a permanently anti static dissipative material. The material is specially designed for applications requiring static control and good optical qualities eg, transparency.

Staticide® 8690 Acrylic Conformal Coating is ideal for providing insulation against high-voltage arcing and corona shorts. This fast-drying formula creates a highly effective, firm, and durable acrylic barrier against environmental elements. The resilient, transparent coating provides exceptional acid resistance and won't fragment, chip, or crack. After curing, its self-healing properties offer protection against nicks and scratches. This ready-to-use formula performs well in both hot and cold environments and is suitable for both rigid and flexible PCBs and electronic assemblies.

Techspray's AR Acrylic Conformal Coating is Fine-L-Kote AR Acrylic Conformal Coating. Acrylic Conformal Coating is a low-cost conformal coating for PCB protection. Fine-L-Kote AR is HAPs (Hazardous Air Pollutants) free, which means it does not contain common coating solvents such as Toluene, Xylene, and MEK. This improves the usability and safety of the coating.

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

Ultra-Illumina™ 3511 is a UV light curable conformal coating made entirely of solids that is used on PCB assembly. It does not clog valves and is intended for use in high volume spray systems. When fully cured, Incure 3511 forms a glossy, hard, and resilient protective coating with a thickness of up to 5mm that acts as a moisture barrier even at high altitudes. Because of the fluorescing properties, quick in-process and quality inspection of coating coverage is possible. Secondary heat-cure is used to cure shadowed areas under components. UL 746C compliant, rated indoor/outdoor to 120°C, and flame class 94V-0.

Noxtat SDB™ acrylic sheets are coated with a transparent metal/plastic material that will permanently prevent formation of static electricity on the surface. The surface has excellent mar and abrasion resistance, resistance to charge generation, and superior static decay characteristics and cannot be tribocharged. The product displays excellent control of both electrostatic discharge (ESD) and particulate attraction. Their permanent characteristics are not affected by humidity. They are intended for use in fabricated parts as well as panels. They are flexible for heat bending and is clear and hard for panel applications.

PPI SP-139 is based on a silicone free adhesive, PPI SP-139 is suitable for masking and surface protection applications. For example, the protection of metal plates or PC boards during storage or transportation. It can be cleanly removed from any surface without adhesive residue. It has been approved for several niche applications, for example, as a powder coat masking tape for bus-bars used in transformer manufacture. It resists temperatures up to 180°C (356°F), short term.

CMC Klebetechnik CMC 12064 is a double-sided polyester tape that has a permanent high adhesive strength on both sides.

Mactac CleanTape LV820 3.0 mil Transfer Adhesive 72# White PCK CF4083-72 is a a 3-mil thick film of clean, aggressive acrylic pressure sensitive adhesive. The adhesive is protected by either a two-side silicone coated 80# natural polycoated Kraft liner or a 72# White polycoated liner. This product is designed for applications that benefit from a clean, chemically inert adhesive tape.

Goonvean Fibers TEC03CON407 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

DuploCOLL® 103 HCR is an high temperature and chemical resistant sealing tapes.

Goonvean Fibers TEC03CON404 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

CMC Klebetechnik CMC 12100 is a double-sided tape used for splicing. A green coating is applied to one side of the substrate.  Adhesive polysiloxane with a high initial tack. On the other hand, there is an acrylic adhesive that is still present.  provides good anchorage to low energy surfaces and will cure further after heat exposure.

DuploCOLL® 101 HCR is an high temperature and chemical resistant sealing tapes.

MPD Industries UVP 0206 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a low odor and good flexible monomer. It is compatible with a wide range of acrylated resins.

DuploCOLL® 15250 HCR is an high temperature and chemical resistant sealing tapes.

Synpol AT-67 Acrylic Resin is a high viscosity hydroxyl functional acrylic co-polymer solution.

Mactac CleanTape LV820 Low VOC Acrylic Double Coated Tape 72# White PCK CB4181-72 consists of a.5mil PET carrier coated on both sides with 1.8 mils of clean, aggressive acrylic pressure sensitive adhesive. The adhesive is protected by either a two-side silicone coated 80# natural polycoated Kraft liner or a 72# White polycoated liner. This product is designed for applications that benefit from a clean, chemically inert adhesive tape.

UVP 0301 is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy,