Products in Conduits & Cable Management

Promyde® BF640 LN is a new experimental copolyamide with lubricant and nucleant additives specially formulated for the production of cast and blown film.

PAR Group Nylon 66 Flame Retardant Sheet has mechanical properties similar to that of nylon 6 but with added flame retardancy. It fulfills the requirement of EN 45545-2 which is a standard specific to fire protection on railway vehicles.

Sylvin Technologies Sylvin™ 7844-70 Red 604 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 7844-95 Brown 7534 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plug and strain reliefs. This compound has an underwriters laboratories listing as a recognized component.

CMC Klebetechnik CMC 70097 is a temperature-resistant double-sided adhesive tape with a high-adhesion, temperature-resistant pure acrylic adhesive on both sides. These adhesives are distinguished by their aging resistance and chemical resistance.

Sylvin Technologies Sylvin™ 7844-95C Black is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Promyde® BF38 LN is a lubricated and nucleated high viscosity Polyamide 6 for general extrusion applications and especially for cast film. Promyde BF38 LN combines good gas barrier properties and chemical resistance, good mechanical and optical properties along with high abrasion resistance and good thermoformability.

CMC Klebetechnik CMC 12064 is a double-sided polyester tape that has a permanent high adhesive strength on both sides.

Sylvin Technologies Sylvin™ 7844-90 Natural is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Promyde® BF840 is a new experimental biobased copolyamide without additives specially formulated for the production of cast and blown film. The renewable content of Promyde BF840 is 50%.

Sylvin Technologies Sylvin™ 7844-80C Black is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 7844-70 Gray 930 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has an underwriters laboratories listing as a recognized component.

Firestop 4100NS is Fire and Smoke Stop Non-Sag Caulking and Sealant. 4100NS is a one-component non-sag firestop sealant based on our environmentally friendly chemistry. 4100NS is a latex-based product designed and tested predominately for firestopping construction joints. 4100NS is virtually odorless and also provides a flexible seal which is non-reactive with most substrates.

Sylvin Technologies Sylvin™ 7844-60 Gray 930 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has an underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 7844-65 Natural is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

RE 9945 AT H is rigid PVC used for electrical conduits extrusion in electrical conducts.

Sylvin Technologies Sylvin™ 7844-95 White 125 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has an underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 7844-90C Black is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Promyde® BF540 L is a lubricated high viscosity copolyamide for the production of monofilaments and blown films with a high transparency.

Promyde® BF540 LN is a lubricated and nucleated high viscosity copolyamide for the production of soft blown films with a high transparency.

Ceramerplus 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Sylvin Technologies Sylvin™ 7844-85 Natural is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 7844-85 Gray 9635 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 7844-95 Black is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

CMC Klebetechnik CMC 10730 is a double-sided tape that is ideal for bonding on siliconized surfaces. The aging-resistant polysiloxane adhesive enables self-adhesive silicone profiles and silicone mats. The tape can also be used in the film and paper industries as a splicing tape for siliconized web products.

Sylvin Technologies Sylvin™ 7844-90 White 1601 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain relief. This compound has a underwriters laboratories listing as a recognized component.

Firestop 5100SP is Fire and Smoke Stop Sprayable Mastic Sealant. 5100SP is our endothermic firestop mastic spray based on PFP Partners’ environmentally friendly chemistry. 5100SP is a latex-based product designed and tested to firestop through-penetrations, construction joints and perimeter containment assemblies. 5100SP is virtually odorless and also provides a flexible seal which is non-reactive with most substrates

Compostable® 7003 Polylactic acid. It is BPI certified for industrial compostability of thermoformed sheet with a maximum thickness of 60 mils (1.50 mm). It is starch-based and gluten-free, made from corn, tapioca and potato starches that primarily come from the American Midwest (versus oil from the Middle East).

Sylvin Technologies Sylvin™ 7844-80C Natural is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

PAR Group PET Sheet (polyethylene terephthalate) is a common thermoplastic that provides high dimensional stability, excellent mechanical strength and good resistance to creep. It offers resistance to chemicals, provides very low moisture absorption and is a good electrical insulator. PET sheet also performs well in wear applications and has a tough, hard surface that can be easily machined and polished. At PAR Group, we have the capability to machine polyethylene terephthalate utilizing our in-house 5 axis CNC technology. We commonly manufacture PET into a range of components such as bearings, gear wheels, control disks and insulators for electrical engineering applications. It can also be converted into tank lids, pump parts and friction strips, or be used as a gas barrier. Please visit our plastic machining section for more information regarding the services we offer and to view examples of our work.

Promyde® BF40 is a high viscosity Polyamide 6 for general extrusion applications and especially for cast film. Promyde BF40 combines good gas barrier properties and chemical resistance, good mechanical and optical properties along with high abrasion resistance and good thermoformability.

Promyde® BF745 LN is a new experimental copolyamide with lubricant and nucleant additives, specially formulated for the production of cast and blown film.

Sylvin Technologies Sylvin™ 7844-70 White 1611 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as strain reliefs. This compound has an underwriters laboratories listing as a recognized component.

Ceramer 60 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Sylvin Technologies Sylvin™ 7844-60 White 125 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has an underwriters laboratories listing as a recognized component.