Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Processing Guidelines
Drying
Material is supplied pre dried and ready to process. Bags and containers should be stored in a dry place at room temperature. Storage time should not exceed twelve months. Material from open or damaged containers should be dried in a dry-air dryer at 75 to 80ºC, the drying time required will depend on the moisture content. Drying temperatures of above 80ºC should be avoided because of possible oxidation.
Extrusion Processing
Promyde® BF540L may be processed on standard single-flighted, three-section screws. Better results can be obtained by using high-performance screws equipped with shearing and mixing sections. The screw length should be at least 24D, and preferably 28-33D to guarantee optimum plasticizing and conveying with the high through-put rates of film extrusion (D: screw diameter). A three-section screw should have a compression ratio (ratio of flight depth in the feed section to flight depth in the metering section) of 3:1 to 4:1.
It is recommended the length of screw sections as follows (L: overall length of screw):
- Feed section: 0.25 to 0.30 x L
- Compression section: 0.15 to 0.25 x L
- Metering section: 0.4 to 0.55 x L
Excellent processing and film properties can be obtained by using following temperatures at the extruder:
- Hopper: 40-50ºC
- Extruder: 210-250ºC
- Adapter&Die: 240-250ºC
Conditioning
Films made of Promyde® BF540L will achieve their final dimensions and properties after equilibrium moisture absorption.
Properties
- Color
- Typical Properties
Value Units Test Method / Conditions Melting Point 190-195 °C ISO 3146 Density 1,12 g/cm3 ISO 1183 Bulk Density 0,69 g/cm3 NAPPA-059 Water Absorption (23°C/sat.) 10.5 % ISO 62 Moisture Absorption (23°C/50 %RH) 3.2 % ISO 62 Chip Size 2.5 mm NAPPA-045 - Film Properties
Value Units Test Method / Conditions Modulus (MD) 500-800 MPa ISO 527-3 Stress at Break (MD) 50-60 MPa ISO 527-3 Elongation at Break (MD) 300-400 % ISO 527-3 Trouser Tear Force (MD) 1.2-1.6 N ISO 6383-1 Trouser Tear Resistance (MD) 25-30 N/mm ISO 6383-1 Puncture force (MD) 2021-04-05 N ISO 14477 Puncture elongation (MD) 2021-03-04 % ISO 14477 Puncture Energy (MD) 2021-08-10 mJ ISO 14477 Haze max. 5 % ASTM D1003 O2 Transmission Rate (23°C, 0% RH) 19.0 cc/m2.d ASTM D3985 O2 Transmission Rate (23°C, 50% RH) 16.0 cc/m2.d ASTM D3985 O2 Transmission Rate (23°C, 85% RH) 46.0 cc/m2.d ASTM D3985 Moisture Vapor Transmission Rate (23°C, 85% RH) 15.0 g/m2.d ISO 15106-1 - Specifications
Value Units Test Method / Conditions Viscosity Number (0.5% in 96% Sulfuric Acid) 250.0 cm/g ISO 307 Relative Viscosity (1% in 96% Sulfuric Acid) 3.9-4.2 - ISO 307 Moisture content max. 0,1 % NAPPA-032
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packaging
Promyde® BF540L is supplied in moisture-proof packaging. Typical formats are Big Bags, Octabins, 25kg bags, and bulk silo trucks.
Storage & Handling
- Storage
All containers are perfectly sealed. The product should be stored in a dry place and opened just before processing.