Products in Packaging & Assembly: Rheology Modifier

MultiTech Rheology Modifier B hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

MultiTech Rheology Modifier A is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

AEROSIL® R 812 S is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It is even more hydrophobic than AEROSIL® R 812 and convenient for stabilizing a defoamer and well suitable as a component of foam control agents.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 8200 is a structure modified hydrophobic silica grade treated with HMDS (Hexamethyldisilazane). It is characterized by an extremely low thickening effect and high compacted bulk density. Its high hydrophobicity makes it suitable as a defoamer silica.

AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-52 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-53 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-51 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-31 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-201 is a synthetic spherical silica with low cohesiveness and high fluidity. This product is multi-porous and has a high specific surface area. This RESIFA™ SOLESPHERE™ silica is used for catalyst supports, as an additive in cosmetic and personal care applications, and in industrial applications.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-122 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-33 is a synthetic spherical silica with low cohesiveness and high fluidity. This SOLESPHERE™ product is a high-oil absorption grade with over twice the absorption capacity of the normal type. It is bulky, easily dispersible, and has distinct properties.

AGC Chemicals Americas, Inc. RESIFA™ SOLESPHERE™ H-121 is a synthetic spherical silica with low cohesiveness and high fluidity. This product leaves a smooth, hydrated skin feel with a matte visual effect. It is multi-porous and has a high specific surface area. This product offers the most functionality for O/W emulsions.

Cardolite® NC - 513 is a monofunctional reactive epoxy diluent used to increase flexibility, impact resistance, water resistance, and flexural strength. It has low viscosity and volatility, making it ideal for formulating solvent-free adhesives. It exhibits good water resistance and reacts completely into the epoxy network, enhancing bond strength.

Bomar™ BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier, and is a perfect choice for optically clear UV-PSAs.

Vycel U is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems.

The 4354 Thinner 4 is a slower drying thinner for use with the MG Chemical’s urethane and acrylic conformal products. The thinner as excellent solvent strength, making it a good oil and grease remover. It has very low water solubility, so it is unlikely to absorb water and create blush. Its drying speed is slow enough to promote excellent leveling, but it is fast enough to accommodate a reasonable assembly line speed.

Vycel EF is a viscosity-reducing diluent with very low color and a low odor level for Polyurethane and Epoxy systems. Vycel EF is very hydrophobic and is completely compatible with Epoxy, Phenolics, MDI, TDI and their Prepolymers

Viplex LS is a low viscosity diluent of PU and epoxy systems with excellent compatibility.

The 4353 Thinner 3 is a moderate speed drying thinner for use with the MG Chemical’s conformal coating products. The thinner promotes good flow properties and suppresses blushing.

Kraton D1164 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied from North America in the physical form identified below. Kraton D1164 PT - supplied as a dusted dense pellet Kraton D1164 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton DX1000 A is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 9% mass. It is supplied from Europe in the physical form(s) identified below. Kraton DX1000 AU - supplied as an undusted porous pellet Kraton DX1000 A is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1157 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 AT - supplied as a porous pellet dusted with talc Kraton D1157 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1189 A is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied from Europe in the physical forms indicated in the grade nomenclature below. D1189 AT - supplied as porous pellets dusted with talc D1189 AS - supplied as porous pellets dusted with amorphous silica D1189 ASM - supplied as powder dusted with amorphous silica Kraton D1189 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Kraton D4270 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is supplied from Japan in the physical forms below. Kraton D4270 JSP - supplied as dusted dense pellets Kraton D4270 JS - supplied as dusted crumb Kraton D4270 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. TAFIGEL PUR 82 is suitable for indirect food contact applications.

Kraton D1114 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 19%. It is supplied from North America in the physical form identified below. Kraton D1114 PT - supplied as a dusted dense pellet Kraton D1114 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1161 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1161 JSP - supplied as dusted dense pellets Kraton D1161 JS - supplied as dusted crumb Kraton D1161 JU - supplied as undusted crumb Kraton D1161 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.