Products in Other Electrical & Electronics Applications: Carbon Fiber

Blu Dot Asia BDA-3K-T38 is a PAN based carbon fiber, which is stronger than steel, lighter than aluminum by weight and has a higher stiffness than titanium alloy.

Conductive Composites NiCVD Coated Fibers 1BC1-12 is Carbon fibers are widely used in commercial and defense applications because of their strength and weight properties. Conductive Composites has developed proprietary coating processes that coats individual filaments with thin, uniform coatings of pure metal.

Applied Sciences Inc. PR-19-XT-PS has an average diameter of about 150 nanometers and has a chemically vapor deposited (CVD) layer of carbon on the surface of the fiber over a graphitic tubular core fiber. It is available in three grades designated as PS, LHT and HHT. The PS grade carbon nanofiber is produced by pyrolytically stripping the as-produced fiber to remove polyaromatic hydrocarbons from the fiber surface.

Blu Dot Asia BDA-12K-T42 is a PAN based carbon fiber, which is stronger than steel, lighter than aluminum by weight and has a higher stiffness than titanium alloy.

Applied Sciences Inc. PR-24-XT-PS has an average diameter of about 100 nanometers and has a minimal chemically vapor deposited (CVD) layer of carbon on the surface of the fiber over a graphitic tubular core. It is available in three grades designated as PS, LHT and HHT. The PS grade carbon nanofiber is produced by pyrolytically stripping the as-produced fiber to remove polyaromatic hydrocarbons from the fiber surface.

NC10004008T-Nickel-coated Carbon Nonwovens NC10004xxxTWet-laid nonwoven of chopped Ni/Carbon fiber staple (~50% Ni, 7-um diameter, 3-25 mm) with 10-20% x-linked polyester binder. Basis weights from 8 g/m² up to 34 g/m² available.

Conductive Composites Nickel Coated Fibers - Precision Coated & Converted Fibers (PC2F) 1AC1PC-0.15 is a highly uniform, conductive short fiber format in lengths from 3mm to 100µm. PC2F is a high-performance conductive and structural fiber with superior handling properties and excellent conductivity/shielding capabilities that is both lighter and longer than typical nickel coated graphite formats. Through our proprietary Chemical Vapor Deposition (CVD) coating process, fibers are coated with a very thin, robust, and ductile film of pure nickel. Due to their precise lengths and easy dispersion, PC2F is a very effective and economical conductive additive. With a wide range of available nickel coating levels and lengths, our easily dispersible conductive short fiber format is perfectly suited for conductive gaskets, elastomer, sealants, adhesives, paints, and other coatings.

PC703006020T Polyester-Carbon Nonwoven is a Wet-laid nonwovens consisting of 45-95% polyester and 1-50% 7- um-diameter carbon fiber staple (1/8 - 1") with 5-25 wt.% of co-polyester binder. (Other binders are available.)

Conductive Composites Nickel Coated Fibers - Precision Chopped (PCF) has developed a proprietary Chemical Vapor Deposition (CVD) coating process where fibers are coated with a very thin, robust, and ductile film of pure nickel. Our process produces a conductive fiber with superior handling properties and excellent conductivity/shielding capabilities. Through a Precision Converting Process, these fibers are converted into short, precise, millimeter and sub-millimeter coated fiber lengths. This provides our customers and partners with a high-performance structural and conductive additive that is both lighter and longer than typical nickel coated graphite powder. Due to their precise lengths and easy dispersion, precision chopped fibers are very effective and economical as a conductive additive for paints, gaskets, sealants, molding compounds, and adhesives.

Blu Dot Asia BDA-24K-T42 is a PAN based carbon fiber, which is stronger than steel, lighter than aluminum by weight and has a higher stiffness than titanium alloy.

NC10004020T-Nickel-coated Carbon Nonwovens NC10004xxxTWet-laid nonwoven of chopped Ni/Carbon fiber staple (~50% Ni, 7-um diameter, 3-25 mm) with 10-20% x-linked polyester binder. Basis weights from 8 g/m² up to 34 g/m² available.

Blu Dot Asia MCF150 is specially processed PAN based fiber suitable for the applications that require strength and/or electrostatic dissipation, and is excellent for making materials electrically conductive.

Conductive Composites NiCVD Coated Fibers 1CC1-12 is Carbon fibers are widely used in commercial and defense applications because of their strength and weight properties. Conductive Composites has developed proprietary coating processes that coats individual filaments with thin, uniform coatings of pure metal.

GC802001020T Glass-Carbon Nonwoven is a Wet-laid nonwoven consisting of 80% glass fiber and 20% 7- um-diameter carbon fiber staple (1/8 - 1") with PVA binder. (Other binders are available.)

Conductive Composites NiCVD Coated Fibers 1AC1-12 is Carbon fibers are widely used in commercial and defense applications because of their strength and weight properties. Conductive Composites has developed proprietary coating processes that coats individual filaments with thin, uniform coatings of pure metal.

Blu Dot Asia CCF06EP is produced by chopping carbon fiber roving/thread into shorter lengths with different sizes.

Applied Sciences Inc. PR-19-XT-HHT is produced by heat-treating the as-produced carbon nanofiber to 3000°C. This converts the fiber to a fully graphitized form and creates a highly conductive carbon nanofiber. The iron content (i.e., the catalyst) is also reduced to very low levels.

Applied Sciences Inc. PR-24-XT-LHT grade is produced by heat-treating the fiber at 1500°C. This converts any chemically vapor deposited carbon present on the surface of the fiber to a short range ordered structure. The inherent conductivity of the fiber is increased.

Blu Dot Asia MCF100 is specially processed PAN based fiber suitable for the applications that require strength and/or electrostatic dissipation, and is excellent for making materials electrically conductive.

Titacon® CF910 is a 10％CARBON FIBER REINFORCED, WEAR RESISTANCE, HIGH STIFFNESS/STRENGTH.

Blu Dot Asia CCF06HT is produced by chopping carbon fiber roving/thread into shorter lengths with different sizes.

Blu Dot Asia MCF60 is specially processed PAN based fiber suitable for the applications that require strength and/or electrostatic dissipation, and is excellent for making materials electrically conductive.

Blu Dot Asia CCF06PU is produced by chopping carbon fiber roving/thread into shorter lengths with different sizes.

Applied Sciences Inc. PR-19-XT-LHT is produced by heat-treating the fiber at 1500°C. This converts any chemically vapor deposited carbon present on the surface of the fiber to a short range ordered structure. The inherent conductivity of the fiber is increased.

Eeonomer 500F are a new class of thermally stable, pH neutral and electrically conductive composites made by in situ deposition of polyaniline or polypyrrole on carbon black. Eeonomers are more stable (up to 300 C) than doped intrinsically conductive polymers and more easily processed with thermoplastics than carbon black. For static dissipative and antistatic composites, coatings, elastomers and adhesives.

Applied Sciences Inc. PR-24-XT-HHT is produced by heat-treating the as-produced carbon nanofiber to 3000°C. This converts the fiber to a fully graphitized form and creates a highly conductive carbon nanofiber. The iron content (i.e., the catalyst) is also reduced to very low levels.

Conductive Composites Nickel Coated Fibers - Precision Coated & Converted Fibers (PC2F) 1CC1PC-0.15 is a highly uniform, conductive short fiber format in lengths from 3mm to 100µm. PC2F is a high-performance conductive and structural fiber with superior handling properties and excellent conductivity/shielding capabilities that is both lighter and longer than typical nickel coated graphite formats. Through our proprietary Chemical Vapor Deposition (CVD) coating process, fibers are coated with a very thin, robust, and ductile film of pure nickel. Due to their precise lengths and easy dispersion, PC2F is a very effective and economical conductive additive. With a wide range of available nickel coating levels and lengths, our easily dispersible conductive short fiber format is perfectly suited for conductive gaskets, elastomer, sealants, adhesives, paints, and other coatings.

Eeonomer 200F are a new class of thermally stable, pH neutral and electrically conductive composites made by in situ deposition of polyaniline or polypyrrole on carbon black. Eeonomers are more stable (up to 300 C) than doped intrinsically conductive polymers and more easily processed with thermoplastics than carbon black.

Blu Dot Asia MCF80 is specially processed PAN based fiber suitable for the applications that require strength and/or electrostatic dissipation, and is excellent for making materials electrically conductive.

NC10004011T-Nickel-coated Carbon Nonwovens NC10004xxxTWet-laid nonwoven of chopped Ni/Carbon fiber staple (~50% Ni, 7-um diameter, 3-25 mm) with 10-20% x-linked polyester binder. Basis weights from 8 g/m² up to 34 g/m² available.

Titacon® CF920 is a 20％CARBON FIBER REINFORCED, WEAR RESISTANCE, HIGH STIFFNESS/STRENGTH