Products in Other Devices & Assemblies: Automotive Applications

Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.

High heat resistance ABS plating grade. Benefits: Enhanced heat resistance; Better dimensional under heat; Excellent balance of heat resistance, impact strength and flowability. Typical Applications: Decorative interior parts, Profiles, Radiator grille, Tailgate handles. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

Very high heat resistance ABS. ISO shortname: ISO 2580-1 ABS 2-M, MG, 115-08-09-20. Benefits: Increased flow; Super low emission grade; Very high vicat softening point ABS grade suitable for interior and exterior applications; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

PC/ABS blend, injection molding grade with excellent mechanical properties balance up to -40ºC. Vicat B120 = 120ºC. Major Benefits: High flow; Very high impact up to -40ºC; Low emission grade; UV stabilized grade; Good stability even with high humidity conditions; Low shrinkage; Good paintability; Thin-walled parts. Typical Applications: Radiator grille, Pillars, Instrument panel parts, Seating parts, Center console trim, Door components, Small household, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

High heat resistance ABS. Benefits: Increased flow; Good process ability behavior; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

High heat resistance ABS. ISO shortname: ISO 2580-1 ABS 1-M, MG, 105-15-16-20. Benefits: Excellent balance of impact strength and flowability; Super low emission grade; Lower mold deposits in injection molding processing applications; Better dimensional under heat. Chemical Composition: Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI)

Improved heat resistance, low emissions, easy-flowing. Major Benefits: Low emission; Medium heat resistance; High flowability. Typical Applications: Radiator grille, Door components, Enclosures for electric devices.

Electroplating grade. Benefits: High Galvano quality for class A surfaces; High flowability. Applications: Shower heads and other sanitary chromed parts, Cosmetic packaging, chromed kitchen products.

Elix™ ABS DP M116GF is High flow GF reinforced ABS (16%). Major Benefits: Excellent balance of impact strength, rigidity and flowability; Good dimensional stability; High rigidity. Typical Applications: Semi-structural Automotive interior parts, Exterior Automotive pillars, Air conditioner fan. Chemical composition: Acrylonitrile-Butadiene-Styrene Copolymer with Glass Filler.

PC/ABS blend, injection molding grade that poses a good combination of impact, stiffness and toughness. Vicat B120 = 130ºC. Major Benefits: Low emission, Extreme heat resistance, Very high impact, High flowability. Typical Applications: Rear light housing, Pillars, Instrument panel parts, Coffee machine, Electrical switches, distribution boards, power sets. Chemical composition: Thermoplastic polymer blend based on polycarbonate (PC) and acrylonitrile-butadienestyrene (ABS).

Haiplen™ H10 T8 HT by Taro Plast is comprised of Polypropylene (unspecified). It is commonly used Haiplen™ H10 T8 HT is certified as UL Flame Rated. It is available in Pellets form.

Haiplen™ EP100 MF3 by Taro Plast is comprised of Polypropylene (unspecified). It is commonly used Haiplen™ EP100 MF3 is certified as UL Flame Rated. It is available in Pellets form.

Seculene® PPR 1240 TV30 S0 can be specifically tailored to the unique needs of our customers. Seculene® PP is used in a wide variety of sectors with extensive polymer requirements, such as the automotive segment. ECOBAT works with a wide range of industry brands from planning and development through to unit production.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3022L1(SL) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3022L1(SL) resin grade is used for electric and electronic applications, headlamp lens, food contact materials and etc. Medium viscosity. Transparent colors only.

A210 is a Ground ATH is used in SMC, BMC.

BDHT H3601 has an excellent mold flow, mold release, superior resistance to the fuel containing alcohols.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3020U(E) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property. CHARACTERISTICS Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3020U(E) resin grade is used for Injection molding products. UV stabilized. Low viscosity. Transparent colors only.

Nilit NILAMID® B3 N is an unfilled nucleated easy flow Polyamide 6 (Nylon 6) compound.This compound is intended for injection molding.NILAMID® B3 N is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

TPE-S, Shore A80, filled, suitable for EMC-appropriate shielding of electromagnetic fields

PA12 functional compound for the production of plastic-bonded magnets

Grupa Azoty S.A Tarnoform® 300 GF2 GB2 there is 10% glass fibers & 10% glass beads reinforced injection- molding grade with increased strength and stiffness and with reduced warpage tendency.

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

Haiplen™ H50 C7 by Taro Plast is comprised of Polypropylene (unspecified). It is commonly used Haiplen™ H50 C7 is certified as UL Flame Rated. It is available in Pellets form.

POM-CF20, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive

Starflam M10004A is an Unfilled Halogen Free Flame Retardant PP Injection Molding Resin

Grupa Azoty S.A Tarnoform® 500 GF8 is a 30% glass fibers reinforced injection-molding easy flowing grade with extremly high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3026B(Q) is a polycarbonate resin grade which has high low temperature impact strength in combination with superior mechanical and physical property.Characteristics: Superior low temperature impact resistance Good flow-ability Workable under a wide range of temperatures (-100 °C ~ 135 °C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance Applications: TRIREX 3026B(Q) resin grade is used for extrusion blow molding components. High viscosity. Transparent colors only.

Ziablend® is already used in the automotive, E&E, construction and consumer goods industry, the recyclates / ZIA compounds from MKV offer a real alternative to virgin material.

EnCounter™ 115GFL by EnCom Polymers is comprised of Polybutylene Terephthalate. It is commonly used EnCounter™ 115GFL is certified as UL Flame Rated.

Nilit NILAMID® B3 HH GB50 is a Polyamide 6 (Nylon 6) compound, 50% glass bead reinforced, high heat stabilized.This compound is intended for injection molding.NILAMID® B3 HH GB50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.