Products in Furniture: Filler

Poraver® 0.1 - 0.4 mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Poraver® 0.5 - 1 mm mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Poraver® 1 - 2 mm mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Poraver® 0.04 - 0.125 mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Poraver® 0.25 - 0.5 mm mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Poraver® 2 - 4 mm mm is an expanded glass granulate, provides a lightweight aggregate solution suitable for diverse applications.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

3N International S90H is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

3N International S90L is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

Featherlite® FL-20 is an ultra-light filler to enhance the production process and improve end-product performance of materials it is added too. It is formulated for cast polymer applications as a means to reduce product weight and save costs, and provides 20% weight reduction and 27% resin demand.

MICROCARB NF4 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

3N International L8WA is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

MICROCARB NF5 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

P.J. Murphy Forest Products 200-mesh is the finest particle size that offer in our website.

P.J. Murphy Forest Products 100-mesh can be manufactured coarser or finer as required.

3N International L8A is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

3N International S14H is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

MICROCARB NF1 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

P.J. Murphy Forest Products Cell-flo is a finer wood flour than the FO6.

3N International S14WJ is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

MICROCARB NF3 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

3N International L8H is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

Featherlite® FL-50 is an ultra-light filler to enhance the production process and improve end-product performance of materials it is added too. It is formulated for cast polymer applications as a means to reduce product weight and save costs, and provides 50% weight reduction and 47% resin demand.

MICROCARB NF2T is a surface-coated very fine Calcium Carbonate powder with good dispersion properties, manufactured from a high purity white Calcium Carbonate.

3N International S14J is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

3N International S90M is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

MICROCARB NF1T is a surface-coated very fine Calcium Carbonate powder with good dispersion properties, manufactured from a high purity white Calcium Carbonate.

Featherlite® FL-1700 is an ultra-light filler to enhance the production process and improve end-product performance of materials it is added too. It is formulated for cast polymer applications as a means to reduce product weight and save costs, and provides 5-50% weight reduction depending on the percentage added to the filler.

Featherlite® FL-1500 is an ultra-light filler to enhance the production process and improve end-product performance of materials it is added too. It is formulated for cast polymer applications as a means to reduce product weight and save costs, and provides 5-50% weight reduction depending on the percentage added to the filler.

AgriFi™ a hydrophobic fiber, provides a number of physical property benefits to products and lowers costs. It's less than carbon neutral, half the density of mineral fillers and allows for exact control of properties. Our thermal mechanical treatment process technologies address all the off-gassing and moisture issues associated with natural fiber polymer fillers by removing the extractives without compromising the integrity of the cellulose and hemicellulose structures of the remaining fibers.

3N International L8WH is a filler masterbatch made from very fine, chopped EMl-ShieldTM stainless steel fibers and polyester, used as additives in ABS, EVA, NYLON, PC, PE, PA, PBT, PET, PPS, PPOS, and ABS to produce conductive plastics. Conductive plastics are new functional plastics that have the properties of anti-static and anti-electromagnetic interference, etc. Conductive plastics are widely used in making anti-static casing and sheathing in electronics and micro-electronic components in communications equipment, medical devices, and specialized products for the petrochemical, military, automobile, and aerospace industries.

MICROCARB NF11 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.