Products in Consumer Goods: Good Mechanical Properties

NYCO6 438 Nylon is general-purpose low viscosity injection-molding grade Nylon 6 that exhibits excellent melt fluidity, good toughness, stiffness, and strength.

Plenco® 03554 is an organic reinforced phenolic molding compound modified with PTFE to offer improved coefficient of friction values. 03554 is available in black. It is UL listed. 03554 is a re-number of 06554 formulation.

XECARB® 6-C30-D11 is a 30% carbon fiber-reinforced ether-based TPU

XEBRID™ 21-C10-G20 is a 10% carbon fiber + 20% glass fiber reinforced PA12

XEBRID™ 1-C10-G10 is a 10% carbon fiber + 10% glass fiber reinforced PA66

Plenco® 03356 is a mineral filled phenolic molding compound offering excellent arc resistance, comparative tracking, and flame resistant properties. UL recognized under component file E40654. 03356 is available in black.

Neoflon FEP NP-40, in pellet and solid forms, showcases features such as chemical resistance, crack resistance, durability, and high-temperature strength. Targeting markets in automotive, consumer goods, and electrical and electronics, it finds application in coaxial cable insulation, plenum cable insulation, and tubes. With extrusion as its processing method, it provides a specialized solution for specific end uses.

XECARB® ST 1-C30 is a 30% carbon fiber reinforced PA66

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

XEBRID™ 29-C30-G20 is a 30% carbon fiber + 20% glass fiber reinforced PA4.10

AL PS-35, a precipitated, non-crystalline, amorphous silica, is an excellent silica for improving mechanical properties of rubber and elastomers. Also, due to its high level of absorption, it can be used as a carrier for liquid additives in applications such as animal feed.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

XECARB® 1-C10 is a 10% carbon fiber reinforced PA66

XECARB® HM 21-C30 is a 30% carbon fiber reinforced PA12

CoreLite PET is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance. Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

XECARB® 1-C30 is a 30% carbon fiber-reinforced PA66

XECARB® 17-C30-P2 is a 30% carbon fiber reinforced PEBA

BRUGGOLEN® P252 is a synergistic mixture of various nucleating and lubricating substances. It is our highly-efficient nucleating agent for polyesters. Reduction of cycle time during injection molding Improved dimensional stability - significant reduction of warping in GD-reinforced compounds Improves mechanical properties (tensile strength, stiffness, etc.) Increases heat distortion temperature Non-volatile Non-extractable

XECARB® ST 30-C30 is a 30% carbon fiber reinforced PA6.10

Synthetic styrene-butadiene rubber Styrene-butadiene synthetic rubber SSBR-4040 TDAE is the copolymerization product of 1,3-butadiene with styrene in hydrocarbon solvent in the presence of organolithium compounds and it is filled with TDAE oil and stabilized with staining antioxidant. The polymer contains no nitrosamines and substances that may become a source of nitrosamines.

XECARB® SL 17-C15-P6 is a 15% carbon fiber reinforced PEBA

FMSIL® 112 R is a precipitated and modified amorphous silica product, uniquely developed to provide rapid incorporation in rubber matrix & excellent dispersion behavior. It offers high filler loading with favorable rheological and mechanical properties, excellent calendaring properties. It imparts a superior matting effect, surface appearance, and low tension & compression set with good aging properties. It also provides superior abrasion resistance.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

XECARB® 40-C30-M31 is a 30% carbon fiber reinforced PC

XECARB® 1-C40 is a 40% carbon fiber reinforced PA66

Plenco® 04002 is a heat resistant, mineral filled phenolic molding compound offering excellent mechanical strength and dimensional stability at elevated temperatures. UL recognized under component file E40654. 04002 is available in black.

Neoflon ETFE EP-521, in pellet and solid forms, boasts features like chemical resistance, excellent melt flow, good electrical properties, and low specific gravity. Targeting markets in automotive, consumer goods, electrical and electronics, and printing and packaging, it finds applications in aerospace, appliances, automotive electronics, and wire and cable insulation. With processing methods covering extrusion and injection molding, it caters to a diverse range of end uses.

Plenco® 04311 is a heat resistant, mineral filled phenolic molding compound offering excellent processability, mechanical strength, and improved cold powder pourability characteristics. UL recognized under component file E40654. 04311 is available in black.

Plenco® 04504 is a two-stage, mineral and cellulose-filled phenolic molding compound having better impact and heat resistance than general purpose molding compounds. Since it also has good electrical properties, it has found use in a wide variety of wiring device applications. It is UL recognized under file E40654. 04504 is available in black.

XEBRID™ 1-C20-G30 is a 20% carbon fiber + 30% glass fiber reinforced PA66

Sipchem EVA 2518 CO is an 18% ethylene vinyl acetate copolymer resin, designed for a variety of foam molding application; manufactured by IPC an affiliate of Sipchem in The Kingdom of Saudi Arabia using an Exxon-Mobil high-pressure tubular process. EVA 2518 CO exhibits low melting temperature, excellent processability and mechanical properties.

BRUGGOLEN® P1507 is an effective flow enhancer for polyamides in the form of polymeric granules. Improved flow and outstanding mechanical properties: Outstanding melt flow; significantly longer spiral-flow filling No influence on mechanical properties (modulus of elasticity, tensile strength, elongation, and impact strength is retained) Better processability of glass-fiber-reinforced polyamides Offers advantages for injection-mold processing, such as shorter cycle times, lower energy consumption, use of highly complex part designs Easy to dose and disperse

XECARB® HM 17-C30-P3 is a 30% carbon fiber reinforced PEBA

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

XEBRID™ 21-C20-G30 is a 20% carbon fiber + 30% glass fiber reinforced PA12