Products in Consumer Goods: Food Contact Acceptable

ST-PA210 is essential flow improver for biobased and biodegradable plastics. Recently also approved for use with polycarbonate copolymers! Utilizing low dosings, the ST-PA210 additive is uniquely suited for increasing melt flow index, compatibility & elongation, and improving dispersion in the emerging world of bioplastics. Our customers report verified performance enhancement with no waxy residues.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

SAHARA C 700HT is a nucleated impact copolymer used for injection molding and compounding applications. It exhibits good impact to stiffness balance combined with high fluidity. Sahara C 700 HTX is typically used in opaque containers, housewares, toys and in thin wall containers for food packaging (e.g. Margarine tubs, Yoghurt pots) and compounding applications.

75 Durometer black Viton A FDA fluoroelastomer compound

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

BroFlam™ 45Z is a high performance flame retardant plasticizer for PVC, adhesives, coatings and elastomers. Its excellent flame retardant efficiency and good plasticizing properties make it a suitable choice for a variety of applications.

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Tasnee PP H1030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3 g/10min. Tasnee PP H1030 is designed for stretch tape from water bath and chill roll, offering low water-carry-over and low shrinkage. Its good mechanical properties and compliance to food contact regulations allow it to be used in various applications.

Injection molding grade for food contact applications. High flowability.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

SAHARA C 1000HT is a nucleated impact copolymer with antistatic additivities used for injection molding applications. It exhibits an outstanding balance of mechanical properties combined with a high fluidity. Sahara C 1000 HT is used in housewares and in thin-walled containers for food packaging (e.g. margarine tubs, yoghurt pots, etc.) and compounding applications. This grade is not intended for medical and pharmaceutical applications.

SAHARA H 250FF is a homopolymer suitable for extrusion applications for textile market. This grade is formulated to have gas fading resistance. SAHARA H 250FF is used for production of continuous filaments (CF), Bulk continuous filaments (BCF) and tape fibers.

NYCO6 512 is a fast cycling, nucleated and lubricated Nylon 6 used for injection molding applications. This material features outstanding processability, chemical resistance, and an excellent balance of mechanical properties.

75 durometer White Viton™ GFS, food contact, fluoroelastomer compound

PP H040 GP/1 is a polypropylene homopolymer with standard molecular weight distribution. The product is characterized by medium melt flow rate, an optimal stabilization package and balanced physical and mechanical properties.

VYNOVA™ S5730 is low molecular weight, low porosity vinyl chloride homopolymer. It is general purpose resin suitable for extrusion, calendering and injection blow molding of PVC - films for packaging or consumer goods, compact foamed sheets and profiles, foamed core pipes and fittings, and bottles.

NXTAMID-T 2610 is a Nylon 6,10 that features excellent dimensional stability, with low moisture absorption. This grade is available in custom viscosities, and additive packages. NYCOA offers NXTamid-T 2610 in a range of viscosities (LM, MV, HV for low, medium, and high viscosities, respectively), and with a variety of additive packages for improved performance.

SAHARA H 120IM is a homopolymer used for general purpose injection molding applications. It exhibits good flow and stiffness. Its attribute in medium flow and stiffness.

ECOLEN® HZ10K is a polypropylene homopolymer, featuring outstanding processability and excellent antigasfading properties.

P4G3B-146 is a Homopolymer uses Injection Molding for processing. It is produced with Phthalate free Catalyst Systems.

Lifocolor BLACK 3030PETG is based on various carrier polymers and types of carbon black. Alongside with the UV radiation effect and choice of carrier, the shade, color depth and color strength are the most important characteristics of black masterbatches. The color depth indicates the intensity of the black coloring. Intensity increases with decreased light reflection or increased light absorption.

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

EPS-391 is used in packing materials of protecting articles from breakage & Thermal insulations.

Black Masterbatch 944 is recommended for injections, Blow moldings, Cables, Sheets, Pipes, Water Pipes and Compound.

Osterman & Company Inc. Osterlene® PPH35F is used in food packaging film, heavy duty packaging, absorbtion & filtration, filament yarn, furniture & buildings, IBCs, geotextile & agriculture, hygiene nonwoven, protective clothes, wipes/tissues.Osterlene PPH35F is a very high melt flow polypropylene homopolymer resin designed for fiber spinning.Osterlene PPH35F meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Lifocolor WHITE 600 PS is based on various carrier polymers, which facilitate the qualified white coloring of a variety of engineering polymers and standard types. These products are available from stock; products not in our standard assortment are available upon request. Lifocolor's range also has white masterbatches with low and no titanium Oxide content for common standard types and engineering polymers. The incredible coloristic characteristics of TiO2), are generally not completely achieved and must be compensated with a higher dosage. The use of compostable polymers is becoming ever more important for this reason. Our Lifocolor assortment includes an Increasing selection Of white masterbatches based on biodegradable polymers and bio-based carrier systems made of renewable resources that also meet the requirements for composability under EN 13432.

Oxy Vinyls 255 is a Polyvinyl Chloride Homopolymer which is white, free flowing powder.

MARFRAN® E CDP 50A is a TPE-S compound based on SEBS modified with specific intrinsically conductive polymers in order to obtain a material with high capability to discharge the electrostatic charges. The electrical conduction mechanism based on Intrinsically Conductive Polymer ensures that this capability is permanent, regardless of the conditions of use of the product. The MARFRAN® E CDP also guarantees a good level of physical and mechanical characteristics.

Osterman & Company Inc. Osterlene® PPC30-SHINA is a high impact polypropylene copolymer designed and formulated for injection molding applications. It contains a unique combination of stabilizers, nucleators and antistat that provides an optimum balance of stiffness and cold temperature impact.PPC30-SHINA exhibits an excellent range of physical and thermodynamic properties which make it an ideal choice for critical applications in the areas of automotive, appliances and lawn and garden.Osterlene PPC30-SHINA meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Manifattura Cattaneo PET + PTFEis a polyethylene terephthalate modified in the structure by the incorporation of dispersed PTFE. This specific formulation exhibits extraordinary self-lubricating properties, in addition to having excellent wear resistance, it offers a better coefficient of friction.

Polipol 3813 is an iso/NPG based unsaturated polyester resin with medium reactivity and viscosity designed for solid surface filled casting applications. It is suitable for the production of solid surface products with excellent strength and esthetic properties. The main areas of use are the production of hygienic materials such as kitchen / fast food counters and sinks suitable for food contact. Interior architecture. It is used in decoration and wherever a natural granite look is desired.

EPS-301 is used in Packing materials of protecting articles from breakage, Thermal insulations Construction materials, Arts and crafts materials, Fish-box & helmet inner mat etc.

ECTA Handelsgesellschaft GmbH G-PET SHEET is used in thermoforming packaging in the food industry as well as in packaging for technical components. It offers all popular materials – PLA, PET, HIPS, and PP Sheets – in 1A versions and for some types also in regrind quality.