Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Characteristics
- High mechanical strength, hardness and rigidity
- Very good creep resistance
- Low and constant friction coefficient
- Excellent wear resistance (comparable and even better than polyamides)
- Excellent dimensional stability (better than acetal resin)
- Better resistance to acids against PA6 and polyacetals
- Good electrical insulation properties
- Physiologically inert (suitable for contact with food)
- High resistance to strong energy radiation (gamma and X rays)
- Excellent anti-stain properties
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
Properties
- Color
- Physical Form
- Physical Properties
Value Units Test Method / Conditions Specific Gravity 1.46 g/cm3 ISO 1183 Water (Absorption At Saturation) 0.47 % ISO 62 Moisture (Absorption At 23°C - 50% RH) 0.23 % ISO 62 - Mechanical Properties
Value Units Test Method / Conditions Tensile Strength (Break) 76 MPa ISO 527 Rockwell Hardness 94 Scale M ISO 2039-2 Elongation (Break) 7 % ISO 527 Tensile Modulus 3450 MPa ISO 527 IMPact Strength (Un-Notched) min.30 KJ /m2 ISO 179 IMPact Strength (Notch) 2.5 KJ /m2 ISO 179 Compressive Stress (1% Strain-23°C) 24 MPa ISO 604 Poisson'S Ratio 0.44 - Abs - Thermal Properties
Value Units Test Method / Conditions Maximum Operating Temperature 115 °C - Minimum Operating Temperature -20 °C - Heat Deflection Temperature (1.81 MPa) 75 °C ISO 75 Thermal Conductivity (23°C) 0.29 W/(K*m) DIN 52612 Coef. Of Linear Thermal Expansion (23 To 100°C) 85 - 85 μm ASTM D696 - Typical Properties
Value Units Test Method / Conditions Bondability Yes - - Oxygen Limit Index 25 % ISO 4589 Uv Resistance No. - - - Electrical Properties
Value Units Test Method / Conditions Volume Resistance 10^15 - 10^16 Ω IEC 60093 Surface Resistance 10^14 - 10^15 Ω IEC 60094 Dielectric Constant (1 MHZ) 3.2 abs IEC 60250 Dielectric Loss Factor (1 MHZ) 0.014 tan IEC 60250 Dielectric Witch (2mm) 21 KV/mm IEC 60243 - Flammability
Value Units Test Method / Conditions Flammability HB-V2 - UL 94 - Tribological Properties
Value Units Test Method / Conditions Static Coef. Of Friction On Polished Steel 0.09 abs MPC test Dynamic Coef. Of Friction On Polished Steel 0.17 abs MPC test Pv Limit Without Lubrication 0.54 MPa MPC test V = 0.5 m / s MPC Wear Coefficient On Hardened Polished Steel 0.6 μm/s test PV = 0.1 MPa * m / s Maximum Pressure 25 MPa MPC test
Regulatory & Compliance
- Food Contact Safety (FDA Compliance)
Yes (Test Method -DM 21.3.73)