Products in Flooring & Surfaces: Urethanes

SYNTHOLUX 271 UA is a radiation-curing, aliphatic urethane acrylate dissolved in a reactive thinner. It is recommended to use it as a coating wood and paper. It can also be used as a sole binder or together with other radiation-curing binders to increase flexibility. It has applications in wood flooring, industrial coatings, furniture coatings, other packaging, and paper applications.

Staticide® ACL 10R Primer is a clear, penetrating, non-toxic primer that provides long-lasting protection against damage associated with water penetration for a variety of horizontal and vertical surfaces, particularly unsealed concrete. This ready-to-use product can be utilized in the preparation of 4700SS Staticide® Diamond Paint. Outstanding water repellency Environmentally safe and 100% vapor permeable

Polygem 738 UV Stable Gloss Water Based Urethane is a water based UV stable paint. This product is available in 10 lbs packaging with approximate 14 x 7 x 8 inches dimension. Polygem 738 gives a glossy finish.

Coating & Binding Technology PC 4500 is a two-component Polyaspartic urethane coating system that exhibits fast cure time, high solids, low-viscosity, high strength, UV resistant, reduced odor, and no VOC. PC 4500 has an extended working time and usable pot-life especially in elevated temperatures and humid conditions.

SU 565 is a trifunctional aliphatic urethane acrylate oligomer diluted with 25% of TPGDA monomer. This product is characterized good abrasion and stain resistance, fast cure and non-yellowing properties.

Jet Set 10 Hydrophobic Sealing and Grouting Compound is a solvent free, low viscosity resin for the sealing of leaking cracks and joints in concrete structures with continuous moisture exposure. The addition of 6% to 10% Catalyst will accelerate the resin to effectively seal off the leak. The mixed material will react with water to form a foam or gel that can seal and choke off the leak. Kaufman Jet Set 10 may be pumped using a single component pump.

Nitoseal® PU280 two-part pouring grade sealant is formulated from a blend of epoxy and urethane polymers. The mixed sealant is self leveling and can be poured directly into hori- zontal joints to form a tough resilient seal possessing a limited degree of flexibility.

DriTac Flooring Products 7900 Super Grab is a single-component, moisture control urethane wood flooring adhesive developed for installing long and wide plank hardwood flooring.

Blome International Sealant 50 is a two-component, cold-applied urethane asphalt elastomeric sealant with very good chemical resistance and good elongation properties. It exhibits excellent resistance to most acids, alkalis and salts. It has excellent adhesion to a variety of substrates including concrete, tile, steel and brick. Sealant 50 is highly resilient and retains its elastomeric properties over a temperature range of -80°F to 140°F. It also has very good curing characteristics for fast turnaround.

SU 5039 is a nona(9) functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring fast cure response, excellent hardness, very good abrasion resistance and non-yellowing properties.

URE-SEAL H2O™ – Gloss has excellent abrasion and chemical resistance with a gloss, mid gloss, or natural finish (Keep in mind that the ‘Gloss’ blend will appear as semi-gloss when applied on brick pavers). The mild odor makes it ideal for interior applications. Ure-Seal H2O will not yellow and will form a very hard protective coating for high traffic areas, counter tops, restaurants, decorative concrete & brick pavers. Ure-Seal H2O can be used over epoxy flooring, garage floors, anywhere that high durability and superior chemical resistance is required

URS 4175 is a high modulus, medium viscosity polyether-based structural spray urethane system with good rigidity and excellent impact resistance at a 1 to 1 by volume mix ratio. URS 4175 is recommended for applications requiring stiffness and impact resistance in a quick set spray system, such as artificial rock formations, ceiling panels, spa walls, foam backing, Styrofoam coatings, and so on.

Jet Set 3 Hydrophilic Sealing and Grouting Compound is a low viscosity resin with high elongation properties for sealing leaking cracks and joints in concrete structures with continuous moisture exposure. The single component system reacts with water to form a foam or gel that can seal and choke off the leak. The product may be pumped as a single component or as a dual component system with water.

Rust Bullet® DuraGrade™ Concrete is a high-performance concrete coating that can be applied directly onto concrete surfaces without any acid etching. Rust Bullet® DuraGrade™ Concrete is a single component urethane resistant to UV rays, acid splash and chemical solvents. It is ideal for any indoor or outdoor concrete surface. Due to its UV resistance and adhesion properties, Rust Bullet® DuraGrade™ Concrete requires no topcoat or base/primer coat. Apply by brush, roller, or spray equipment. VOC compliant in all 50 states.

GymShoe® Gloss Sport Floor Finish is a two component, clear, waterbased sport floor finish specifically formulated to perform on basketball and other wood sport floors. GymShoe dries clear with excellent application characteristics and extreme durability.

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

Cretelox is a super impact and chemical resistant urethane mortar for concrete repairs and leveling of floors in industrial and marine environments. A trowelable epoxy mortar where high loads, abrasion and impact is a major concern combined with chemical attacks.

Perdure FE80 is an ultra-high solid, flexible urethane-modified epoxy used as a crack isolation membrane for interior use under various Duraamen Resinous Flooring Systems. It resists cracking caused by horizontal substrate movement, providing a crack-resistant, resilient, sound-absorbent, waterproof, durable floor.

Chemtek Products CF-320 POLY-GLOSS is a high solids oil modified urethane sealer which is a ready too use sealer that offer a tough durable finish that protects concrete and resists many industrial and is unsurpassed for resistance to rubber burns from lift truck traffic.

URS 1560 is a clear, one-component, non-yellowing urethane coating that can be applied directly to surfaces as a sealer / surfacer in single or multiple coat applications. URS 1560 is recommended for applications requiring high abrasion and chemical resistance, such as floor and deck coating, masonry sealer, and so on.

SU 5030 is a hexa-functional aliphatic urethane acrylate oligomer with 31% butyl acetate developed for UV/EB cure coating applications requiring excellent adhesion on difficult substrate, extreme fast cure response and non-yellowing properties.

UA-25 is an All-in-One urethane wood flooring adhesive. UA-25 is the adhesive, moisture protection and sound control in one easy trowel-on application. UA-25 is backed by a Limited Lifetime Warranty.

Polygem 739 UV Stable Gloss Water Based Urethane is a water based UV stable paint. This product is available in 10 lbs packaging with approximate 14 x 7 x 8 inches dimension. Polygem 739 gives a matte finish.

Micorthane™ 6-75P Elastometric Primer is a two component, high solids urethane elastomer primer, that remains flexible even at extremely low temperatures. This 82.0% non-volatile primer provides an extremely flexible membrane which has excellent resistance to water, aqueous acids, bases and salts. The high degree of strength and flexibility provided by this coating reduces failures due to cracking or shifting of substrata.

Rust Bullet® DuraGrade™ Concrete Ultra Low VOC is a high-performance concrete coating that can be applied directly onto concrete surfaces without any acid etching. Rust Bullet® DuraGrade™ Concrete Ultra Low VOC is a single component urethane resistant to UV rays, acid splash and chemical solvents. It is ideal for any indoor or outdoor concrete surface. Due to its UV resistance and adhesion properties, Rust Bullet® DuraGrade™ Concrete Ultra Low VOC requires no topcoat or base/primer coat. Apply by brush, roller, or spray equipment. VOC compliant in all 50 states and Air Quality Management Districts.

DriTac Flooring Products 7400 Easy spread is a urethane wood flooring adhesive that is very easy to spread and dispense from the pail, allowing for increased productivity. It contains no water and provides a permanent bond.

Capitol Adhesives WA060 Acrylic Urethane Engineered Wood Adhesive is a high solid adhesive designed for the installation of pre-finished engineered flooring. WA060 Acrylic Urethane Engineered Wood Adhesive offers a high initial grab and easy clean-up. WA060 Acrylic Urethane Engineered Wood Adhesive is protected by AMP Guard®, an anti-microbial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesive.

SU 5020is a hexa-functional aliphatic urethane acrylate oligomer with 26% butyl acetate developed for UV/EB cure coating applications requiring excellent adhesion on difficult substrate, extreme fast cure response and non-yellowing properties.

SU 520 is a deca(10)-functional aliphatic urethane acrylate oligomer developed for UV/EB cure coating applications requiring good abrasion resistance, extreme fast cure response, high hardness and non-yellowing properties.

MCU-101 is a single component, high performing; moisture cured clear urethane coating that dries quickly to a hard abrasion resistant film. MCU-101 is used as a primer and/or a topcoat for concrete or wood surfaces. MCU-101 is ideal as a clear primer over concrete to help eliminate dusting due to concrete laitance and to help prevent spalling due to thermo shock freeze/thaw cycles. Due to its excellent impact and abrasion resistance, MCU-101 is widely used in heavy traffic areas. MCU-101 is also used as a primer under our thin film chemical resistant coating systems.

Abothane 8003-3™ Protects wood, concrete, and seamless floors anywhere a clear, tough coating is required. High gloss. Abothane 8003-3 is designed for high flexibility and abrasion, chemical, and corrosion resistance with high wear and slip resistant properties. Practically colorless, it looks great on most floors. Requires no waxing. Perfect consistency for sealing porous surfaces.

ZAR® Interior Oil Modified Urethane Sanding Sealer is a super-fast drying first coat for wood. Specially formulated to seal wood surfaces with itsself-leveling, easy flow properties. Exotic hardwood approved. Use on wood speciessuch as Teak, Brazilian Walnut, and Brazilian Cherry.

UA-15 is a 2 in 1 moisture control urethane wood flooring adhesive. UA-15 is a superior formulation for the interior installation of all types of wood flooring over concrete. UA-15 provides moisture protection for up to 15 lbs. MVER for a period of 10 years from the installation date.

Carbamac® 43-4355 is an oil-modified polyurethane resin. Manufactured in North America. All components of this product are listed on the DSL.

Coating & Binding Technology PC 4000 is a two-component Polyaspartic urethane coating system that exhibits fast cure time, high solids, low-viscosity, high strength, UV resistant, reduced odor, and no VOC. PC 4000 has an extended working time and usable pot-life especially in elevated temperatures and humid conditions.

DriTac Flooring Products 6900 Edge is a contractor grade, urethane wood flooring adhesive that is very easy to spread and dispense from the pail, allowing for increased productivity.