Products in Building & Construction: Surfactant (Cationic)

IAM Cationic Surfactant is a emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Perma-Tac 99 is a liquid antistrip for hot mix asphalt.

Wetfix BE is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cut-backs. It is an adhesion promoter and coating aid for foamed asphalt cold mix.

Wetfix BXE is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter and coating aid for foamed bitumen cold mix.

Redicote C-500-1 is a emulsifier for cationic quick-set bitumen emulsions for quick-traffic slurry and micro surfacing.

Rediset LQ-900 is a compaction aid for hot and warm mixes which allows a reduction in mixing and paving temperatures while providing active and passive adhesion.

Redicote 404 is a emulsifier for emulsions used in micro surfacing and slurry surfacing. Dope (break retarder) for slurry surfacing.

Kling Beta 2550(HM) is a liquid antistrip for hot mix asphalt.

Use of Redicote E-33 together with regular cationic emulsifiers generally increases emulsion viscosity.

Redicote E-4850 is a emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote C-150AP is an Adhesion Promoter for chip seal (hot applied), patch mixes and emulsions. Rapid and medium-setting Cationic Emulsions most often have good adhesion to siliceous aggregates, but anionic emulsions may require the addition of adhesion promoters. Redicote C-150AP have been specially formulated for use in anionic emulsions. Redicote C-150AP is a water-soluble adhesion promoter for anionic emulsions to improve coating and adhesion to aggregate. Additive for asphalt sealers (sealcoat) to improve resistance to moisture. Redicote C-150AP is an Easy to Use: Water-soluble product can be blended into finished emulsion or sealcoat Use 0.1-0.5% basis emulsion or finished sealcoat. Product contains water and should not be added to hot asphalt.

Wetfix N422 is an adhesion promoter for hot and warm mix, and for cold and warm mix based on soft bitumens or cutbacks. Adhesion promoter for surface dressing (chipseal).

Kling Beta 2914 is a liquid adhesion promoter for hot and warm mix.

Redicote C-2914 is a liquid adhesion promoter for hot and warm mix.

Redicote E-11E is a emulsifier for cationic slow set bitumen emulsions for tack, prime, slurry seal and cold mix applications. Emulsifier for oils and resins sed for dust control and rejuvenating. Break retarder for slurry.

Diamine HBG Pellets is an active adhesion agent in solid (pellet) form for hot bitumen, cut back bitumen, and soft bitumen for use in surface dressing (chipseal), and cold and warm mixes.

Redicote E-4875 NPF is a emulsifier for cationic slow setting emulsions suitable for tack, prime, slurry seal, cold mix and sealcoats.

Wetfix AP47 is a low hazard adhesion promoter and warm mix additive.

Redicote EM44 is a liquid emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chipseal, open graded cold mix and tack coat. Emulsifier for phosphoric acid slurry and micro surfacing systems.

Redicote C-450-1 is a emulsifier for cationic quick set bitumen emulsions for slurry and micro surfacing. Break retarder for quick set slurry surfacing and micro surfacing.

Redicote 75TX is a emulsifier for coal tar pitch and bitumen based sealers in clay stabilized recipes. Adhesion promoter for cutbacks and industrial products based on bitumen,

Redicote 611 is a emulsifier for slow setting cationic bitumen emulsions and control additive for slurry seal.

Wetfix AP17 is a adhesion promoter for hot and warm mix.

Wetfix 312 is a liquid adhesion promoter for hot and warm mix. It is an adhesion promoter for cold and warm mix based on cut-back bitumen. Adhesion promoter and coating aid for foamed bitumen cold mix.

Redicote EM24 is a liquid emulsifier for cationic rapid and medium-setting bitumen emulsions suitable for chipseal and open graded cold mix.

Wetfix 312R is a 100% active lower odor antistrip that provides the best value for the money.

Redicote E-85 is a emulsifier for rapid and medium setting cationic bitumen emulsions.

Redicote C-471 is a emulsifier for cationic quick-set bitumen emulsions for slurry and micro surfacing

Diamine OLBS is an active adhesion agent for hot bitumen, cut back bitumens, soft bitumens and emulsions used in surface dressing (chipseal), and cold and warm mixes including those using reclaimed materials.

Redicote EM-44A is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal, tack coat and open-graded cold mix. Emulsifier for slurry surfacing and cold mix when used with phosphoric acid.

Arquad T-50 HFP is a cationic surfactant based on tallow amine - Tallowtrimethylammonium chloride. Emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Redicote E-5 HF is a emulsifier and co-emulsifier for cationic bitumen emulsions used for tack, prime, and cold mix applications.

Kling Beta LL is a additive for cold stockpile mixes based on cutback or fluxed bitumen used for pothole patching, reinstatements and repairs.

Redicote E-4819 is a emulsifier for cationic rapid and medium setting bitumen emulsions suitable for chip seal (surface dressing), tack coat and open graded cold mix.

Redicote E-4880 is a cationic super slow setting emulsifier providing extended workability for virgin and recycled cold mixes produced in plant.

Redicote 103 is a emulsifier for high viscosity rapid and medium setting cationic bitumen emulsions.