Products in Building & Construction: Styrenics

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Bewi NF-714P is a flame retardant (FR) expandable polystyrene grade containing pentane as a blowing agent and a brominated polymeric flame retardant as an FR additive. The product is delivered in the form of spherical beads with a bulk density of about 0.6 g/cm3 and is available in 1100 kg octabins.

ChemSystems Helix Waterproof Membrane is a unique polymer emulsion waterproofing compound designed for use where waterproofing and crack isolation is required. It is recommended for use between bonded or un-bonded topping slabs where slab cracking and movement is a problem. It may be used beneath ceramic tile, marble, quarry tile, below grade, between slab and under composition floors and decks. Waterproof Membrane is based on styrene butadiene latex that dries to form a tough, water and vapor resistant film. Waterproof Membrane is non-toxic, water-based, environmentally friendly and does not contain any solvent. Testing have established that Waterproof Membrane will remain pliable at temperatures as low as -15 °F and still maintain its crack bridging properties. This makes it an excellent choice for exterior applications in cold climates.

Kraton D1152 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1152 ES - supplied as porous pellets dusted with amorphous silica Kraton D1152 ET - supplied as porous pellets dusted with talc Kraton D1152 ESM - supplied as powder dusted with amorphous silica Kraton D1152 E is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1192 A is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 AT - supplied as porous pellets dusted with talc Kraton D1192 AS - supplied as porous pellets dusted with amorphous silica Kraton D1192 ASM - supplied as powder dusted with amorphous silica Kraton D1192 ATM - supplied as powder dusted with talc for the North American market Kraton D1192 A is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

DynaStar™ 77330-9000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

Fine-Blend SBG-001 is a core-shell structure compatible flexibilizer based on butadiene styrene rubber in the core and epoxy groups in the shell.

Elastoprene S1070A is a styrenic elastomer intended for injection molding and extrusion applications, offering good tensile strength, rubbery look and feel, and easy processing.

FIBRANxps ETICSGF-I is a rigid water-resistant insulation board made from extruded polystyrene with smooth surface on both faces.

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

Bewi NF-514P is a flame retardant (FR) expandable polystyrene grade containing pentane as a blowing agent and a brominated polymeric flame retardant as an FR additive. The product is delivered in the form of spherical beads with a bulk density of about 0.6 g/cm3 and is available in 1100 kg octabins.

ROMILOY® 5240 GF30 is PBT/ASA, injection molding grade, 30% glass fiber reinforced, high dimensional stability, high surface quality.

Smooth blend ABS-1100 is a wear resistant acrylonitrile butadiene styrene compound offering superb lubricity by incorporating PTFE. It is developed for application demanding stringent wear resistant and low friction performance.

InnoKril® ABS M0111000000485 is a ABS. It is UV, heat Stabilized and is available in white color.

ACRYSTEX® PM-600 is a Styrene Methyl Methacrylate Acrylic Copolymer product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Characteristics include: Flame Rated RoHS Compliant

DynaStar™ 77370-9000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

Calprene 700 is a new 70/30 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a linear structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 700 is a BHT* free SBS, especially suitable for food contact and textile contact applications.Calprene 700 offers good mechanical properties and shows a very good yellow index behavior.Calprene 700 is supplied in porous pellets.*(BHT content in pure polymer less than 30ppm).

Calprene 412 is a 69/31 butadiene/styrene thermoplastic copolymer, polymerized in solution and has a radial structure. This product is available in: - Calprene 412 porous pellet. - Calprene 412M powder form dusted with amorphous silica.

PolyBrite® 31 CB is a water-based styrene acrylic elastomeric coating that cures to form a seamless reflective barrier when applied over approved roofing substrates. PolyBrite® 31 CB is specifically formulated for hot dry climates and extends the life cycle of new and existing roof systems by providing protection from ultraviolet sun and other weather conditions. Its highly reflective properties keep the roof surface cool resulting in reduced building energy cost in high temperate conditions.

Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1111 KT - supplied as a dusted porous pellet Kraton D1111 KU - supplied as an undusted porous pellet Kraton D1111 KSM - supplied as a dusted powder Kraton D1111 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Acryline RA is an aqueous emulsion of copolymer based on styrene acrylic, used as a waterproofing agent in the civil construction area, as a component for interior and exterior lines in the paint industry.

Kraton A1536 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton A1536 HU - supplied to customers as an undusted powder. Kraton A1536 HS - supplied to customers as a dusted powder Kraton A1536 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

ABS glass fiber reinforced K-5110G has an excellent heat resistant property, which can be used as a substitute for engineering plastics as well as in various other fields. In general, this type of ABS resin has one disadvantage of having a poor surface finish; however, DENKA has developed a special technique to improve its surface texture by optimizing the fiber length distribution of a base resin and glass fibers.

ROMILOY® 5240 GF20 is ASA/PBT, injection molding grade, 20% glass fiber reinforced, high dimensional stability, high surface quality.

ABS granules, medium flowing

Jackocell 4 S 332 is a product that has a High strength, Fast molding cycles and Good density control as a feature with High density molding.

3B Fiberglass 183F-11C is designed to reinforce PBT, ABS, ABS blends (with PC, PBT, PET) and styreni.When molded these products exhibit outstanding dry mechanical properties, and especially a high impact resistance. The versatile sizing gives also an excellent color in natural compounds and is suitable with flame retardant formulations. Specific manufacturing technology provides 183F-11C chopped strand product with excellent dispersibility. As a result, this product offers excellent properties in a wide range of applications.

Kraton D1155 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below. Kraton D1155 ES - supplied as porous pellets dusted with amorphous silica Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen.

Lambdapor® 750 premium is an expandable polystyrene granulate (EPS) with higher graphite content which can be converted into insulating boards with extremely low thermal conductivity and a density below 18 kg/m³.

Kraton D4271 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied from Japan in the physical forms below. Kraton D4271 JSP - supplied as dusted dense pellets Kraton D4271 JS - supplied as dusted crumb Kraton D4271 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

SABIN ENGINEERING AAA GPPS are made from Polystyrene particles. They are characterized by a high degree of light transmission and high transparency, which makes them ideal for glazing frames and ceiling lights. GPPS is a low maintenance and lightweight thermoplastic which comes with high gloss and sparkling clarity due to its amorphous nature. It is widely used in fabrication and gives exceptional results.

Hot polymerized SBR 1006 elastomer is used in applications such as adhesives, mechanical rubber goods, floor tile, cove base and brake friction products.

NUDEC®PS plastic sheets are characterized by a high degree of light transmission, which endows them with high transparency. For this reason, they are ideal for inside glazing, frames and ceiling lights.

ROMILOY® 3020/01-4 M10 is ASA/PA, injection molding grade, 10% mineral filled, impact-resistant, scratchresistant, UV stabilized.

FIBRANxps 300-I is a rigid water-resistant insulation board made from extruded polystyrene with smooth surface on both faces.