Products in Building & Construction: Styrenics

Its specificity are suitable for extrusion products with great surface appearance. Suitable for printing process and food packages. Its great impact strength and stability are suitable for large piece products.

LURANYL® KR 2403 G2 is a PPE/PS-I, injection molding grade, 10% glass fiber reinforced, high heat resistance, high stiffness.

ROMILOY® 9170E is PC/ABS, extrusion and injection molding grade, chlorine-, bromine- and antimon-free flame retardant.

Absylux® is Westlake Plastics’ family of Acrylonitrile Butadiene Styrene (ABS). Absylux® is an economical all-purpose engineering plastic exhibiting good dimensional stability, impact strength, and stiffness. Absylux® is a popular choice for prototyping parts where low volumes and easy machining are required. Absylux® can also be painted and is easy to bond with adhesives. Absylux® is FDA Compliant in natural (beige) and black for food applications.Westlake Plastics proprietary compression molding process provides better dimensional stability and resistance to warpage during machining compared to other extruded ABS sheet products in the marketplace.

Emulprene 1012CR is a crumb version of a high viscosity hot emulsion styrene-butadiene copolymer, polymerized using fatty acid emulsifier and coagulated with salt-acid. It is very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

Kraton D1157 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1157 AT - supplied as a porous pellet dusted with talc Kraton D1157 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Solaxis ASA is poised to become the most popular all-purpose prototyping material for users of Fortus 380mc™, 450mc™ and 900mc™ 3D Printers, and the Stratasys F123™ Series. Now you can build consistently high-quality parts, with exceptional UV stability and the best esthetics of any FDM® thermoplastic. Matching or exceeding the mechanical properties of ABS, ASA may be your new favorite general prototyping material. Its UV-resistance makes it especially suited in production parts for outdoor commercial and infrastructure use. And its wide selection of colors and matte finish makes it ideal for attractive prototypes in consumer sporting goods, tools and automotive components and accessories.

Lambdapor® 750 STD is an expandable polystyrene granulate (EPS) which can be converted into insulating boards with reduced thermal conductivity and a density below 18 kg/m³.

MAYREX® MW111 U is Acrylonitrile-Butadiene-Styrene (ABS) grade product.

sunpor® A145 is expandable polystyrene granulate (EPS) which can be processed into rigid foam boards.

MAYREX® MW111 is Acrylonitrile-Butadiene-Styrene (ABS) grade product.

ABS glass fiber reinforced K-5130G has an excellent heat resistant property, which can be used as a substitute for engineering plastics as well as in various other fields. In general, this type of ABS resin has one disadvantage of having a poor surface finish; however, DENKA has developed a special technique to improve its surface texture by optimizing the fiber length distribution of a base resin and glass fibers.

Emulprene 1011 is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

EPS-321N used in thermal insulation, Construction materials, Lightweight fill materials and Packing for electronic appliance etc.

Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Fine-Blend EMI-200 is styrene-acrylonitrile binary random low molecular weight copolymer, and it has colorless bead appearance.

RESIPRENE® 1045 is a Thermoplastic Elastomer (TPE) easy to process □ Easy color match and great for injection molding process

Kraton D1189 A is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 32% mass. It is supplied from Europe in the physical forms indicated in the grade nomenclature below. D1189 AT - supplied as porous pellets dusted with talc D1189 AS - supplied as porous pellets dusted with amorphous silica D1189 ASM - supplied as powder dusted with amorphous silica Kraton D1189 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Emulprene 1006CR is a crumb hot emulsion styrene-Butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 7% and 12% of Calcium Carbonate is used as dusting agent.

LURANYL® KR 2403 G6 TW 26343 is a PPE/PA, injection molding grade, 30% glass fiber reinforced, impact-resistant, high heat resistance.

ABS granules, high impact

LURANYL® KR 2403 G4 TW 26343 is a PPE/PS-I, injection molding grade, 30% glass fiber reinforced, high heat resistance, high stiffness, KTW-, ACS- and WRAS-approval up to 85°C, black.

Grunstoff Kunststoff-Recycling ABS (acrylonitrile butadiene styrene) is an amorphous, thermoplastic standard plastic with countless favorable mechanical properties. Moreover, it is chemically stable, too. It consists of three components: the monomers acrylonitrile (15-35 %), butadiene (5-30 %) and styrene (40-60 %). The plastic’s properties can be controlled precisely by changing the mixing ratio. ABS is easy to glue, weld and machine cut. The plastic is ideal as a backing for coatings with polymers or metals (chromed surface of a plastic component). It absorbs little water and has very good mechanical absorption as well as outstanding sound absorption properties.

Asahi Kasei Tuftec™ H1221 is specially designed as a modifier to increase flexibility of polypropylene (PP). Its excellent compatibility makes H1221 ultra-finely dispersed into PP. PP and H1221 blends provide transparent PP sheets and films with excellent flexibility and resistance to hazing or whitening on bending. The excellent adhesion is suitable for the use of adhesive layer of protective films with hot-melt and pressure sensitive characteristics. H1221 meets USP Class Ⅵ standards. It may be used for medical applications after a special agreement with Asahi Kasei.

EPS-301 is used in Packing materials of protecting articles from breakage, Thermal insulations Construction materials, Arts and crafts materials, Fish-box & helmet inner mat etc.

Stypol® AIPY4000 - impact polystyrene shrinkage control additive. For use in SMC and BMC appliations. Main applications areas are building and construction, electronic and electrical, home and domestic applications, industrial sector etc.

DynaStar™ 77350-1000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

Filler reinforced, Good abrasion resist, Dimensional Precision

Tique EPS Foam Board (Expanded Polystyrene) Type II is an integral part of an EIFS system. EPS Foam Boards provide insulative qualities as well as drainage capabilities for moisture release systems. It meets or exceeds physical and thermal property standards as established in ASTM C 578.

Kraton D4270 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene in the neat polymer of 32% mass. It is supplied from Japan in the physical forms below. Kraton D4270 JSP - supplied as dusted dense pellets Kraton D4270 JS - supplied as dusted crumb Kraton D4270 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Jackocell 4 S 232 is a product that has a High strength, Fast molding cycles and Good density control as a feature with High density molding.

Suitable for products requiring high impact strength and low temperature performance

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Styron HI™ is High Impact Polystryene HIPS. It is a low-cost plastic material that is easy to machine and fabricate. Stryon HI is often specified for low strength structural applications when impact resistance, machinability, and low cost are required.

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.

DİOKİ EPS F® is white beads contains internal non-HBCD flame retardant additive and pentane as blowing agent. It is not recommend for use in food contact applications. Each bead’s density is 1,05 kg/m³, bulk density is approx. 600 kg/m³ DİOKİ EPS F® is a polymer has high quality, has perfect expansion properties. It is specially produced for the production of incombustible products. It does not include in HBCD.