Products in Building & Construction: Silicones

Andisil® OH 2,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

SR8850-2 is a pure silver-plated copper filled conductive RTV silicone sealant. This one-component electrically conductive silicone adhesive cures at room temperature when exposed to atmospheric moisture.The material has no corrosive by-products and has good adhesion properties to metals, plastics, silicones, ceramics and glass. SR8850-2 is provided as a one-part electrically conductive elastomer silicone adhesive sealant with a compatible primer. The adhesive has a continuous operating temperature of 125°C while conductivity is maintained when exposed to temperatures up to 200°C. The silicone cures when exposed to atmospheric conditions. The typical curing schedule is 48 hours at 25°Cand 60% relative humidity.

USI Chemical USi-PDMS 0.65 is a special product which has excellent physical and chemical properties.

Andisil® crosslinkers and chain extenders are reactive silicon-hydride containing polysiloxanes that can be used in addition cure systems with Andisil® VS polymers or Andisil® Reactive Methyl Phenyl polymers and a Andisil® platinum catalyst. They are available in various viscosities and silicon-hydride contents.

Andisil® OH 14,000 is a Silanol terminated fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® crosslinkers and chain extenders are reactive silicon-hydride containing polysiloxanes that can be used in addition cure systems with Andisil® VS polymers or Andisil® Reactive Methyl Phenyl polymers and a Andisil® platinum catalyst. They are available in various viscosities and silicon-hydride contents.

Andisil® crosslinkers and chain extenders are reactive silicon-hydride containing polysiloxanes that can be used in addition cure systems with Andisil® VS polymers or Andisil® Reactive Methyl Phenyl polymers and a Andisil® platinum catalyst. They are available in various viscosities and silicon-hydride contents.

Andisil® OH 40 is a Low viscosity 3.5% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® OH 50,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® OH 6,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Foam control agent for water-based gloss paints and wood coatings.

Andisil® OH 30 is a Low viscosity 6% silanol fluid. Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

SR8850-1 is a room temperature curable, silver coated copper filled, electrically conductive RTV silicone sealant/adhesive. It can be used as a coating if dissolved or diluted with low boiling point solvent, such as naphtha. The material has no corrosive by-products and has good adhesion properties to metals, plastics, silicones, ceramics and glass. It is useful for bonding large area substrates and components of any size. The material is provided as a one-part electrically conductive elastomer/silicone with a compatible primer. The silicone cures when exposed to atmospheric conditions. The typical curing schedule is 24 hours at 25°C and 60% relative humidity. Using a large volume of paste requires a cure schedule of 48 hours at 25°C and 60% relative humidity.

Andisil® EM 1374 is a 40% emulsion of an alkyl trialkoxysilane. It can be utilized in the construction industry as a concrete hydrophobizing agent. The water-based emulsion provides a convenient delivery system for blending into the concrete matrix.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

USI Chemical USi-PDMS 1000 is a special product which has excellent physical and chemical properties.

USI Chemical USi-PDMS 10000 is a special product which has excellent physical and chemical properties.

USI Chemical USi-PDMS 30000 is a special product which has excellent physical and chemical properties.

Andisil® crosslinkers and chain extenders are reactive silicon-hydride containing polysiloxanes that can be used in addition cure systems with Andisil® VS polymers or Andisil® Reactive Methyl Phenyl polymers and a Andisil® platinum catalyst. They are available in various viscosities and silicon-hydride contents.

Andisil® crosslinkers and chain extenders are reactive silicon-hydride containing polysiloxanes that can be used in addition cure systems with Andisil® VS polymers or Andisil® Reactive Methyl Phenyl polymers and a Andisil® platinum catalyst. They are available in various viscosities and silicon-hydride contents.

PEL-SIL™ 1316 silicone surfactant is compatible with polyols and specially designed for use with pentane in both appliance formulations and laminated continuous rigid board foam. PEL-SIL™ 1316 is designed to maximize the k value both initially and in long term aging. PEL-SIL™ 1316 will produce foam with excellent flowability and a high percent of closed cells.

PEL-SIL™ CL370 is an amino-functional siloxane with pendant propyldiamine groups. The specialty amino polysiloxane can be used in coatings and adhesives for improving adhesion to various substrates. PEL-SIL™ CL370 is a reactive amine-containing siloxane additive as resin modifier for epoxy resin and polyurethane systems to impart flexibility and strength.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® OH 80,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

XtraBond® HT is a one part, easy to use, non-slumping paste that cures to a silicone rubber when exposed to atmospheric moisture at room temperature. This product is engineered to provide a durable, watertight bond when exposed to continuous temperatures ranging from -40° to 500°F on a continuous basis – while maintaining its integrity at up to 600°F for intermittent time periods. Its unique formulation acts as both a thermal and electrical insulator as well, so it is ideal for sealing around heating elements.

Andisil® MOS is a Methyl tris(MEKO)silane. Andisil® Oximes are liquid raw materials for neutral condensation curing silicone sealants. In the presence of a (tin) catalyst these silanes react with hydroxyfunctional silicone polymers; exposure to moisture results in the formation of crosslinked, elastomeric silicones. In contrast to acidic or basic curing systems, no acidic acid or amine, but 2-butanoneoxime is liberated during application. Due to the neutral character of 2-butanoneoxime, sealants based on Andisil® Oximes can be applied even on (corrosion) sensitive substrates like metals or marble.

USI Chemical USi-PDMS 10 is a special product which has excellent physical and chemical properties.

Andisil® crosslinkers and chain extenders are reactive silicon-hydride containing polysiloxanes that can be used in addition cure systems with Andisil® VS polymers or Andisil® Reactive Methyl Phenyl polymers and a Andisil® platinum catalyst. They are available in various viscosities and silicon-hydride contents. Andisil® XL 11 has random pendant silicon-hydride functionality and are trimethylsiloxyterminated.

XtraBond® 450FS is a one component, non-sag, permanently flexible, fast set neutral cure silicone sealant. The product is engineered to deliver excellent adhesion to vinyl, glass, aluminum, wood, sheet metal and most common building materials – without the need of a primer. The product is an ideal fit for applications where there is a lack of moisture that would aid the curing process.

SW-244 is a clear penetrating, breathable water repellent designed for the protection of exterior above-grade concrete, brick masonry, and some natural stones from the damage caused by water intrusion. It penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. SW-244 is not a coating and as a result will not discolor or change the surface appearance in any way.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.

Andisil® Vinyl Polymers are vinyl-terminated dimethylpolysiloxanes that are available in a variety of viscosities. They can be used as base polymers or as blend polymers in order to create the desired hardness. These polymers can be cured with silicon-hydride crosslinkers and a platinum catalyst.