Suppliers in Fence, Decks & Rails

"International Recycling is one of the largest independent trading companies in the UK, bringing together over 65 years combined experience in the recycling industry. IRL sources and supplies a wide range of recyclables - recovered paper/plastics and prime paper/reel stock - internationally via a network of trusted partners and its multi-lingual staff are fully trained in all the required import/export regulations and procedures."

Quantum's founder, Tony LaGrange, obtained a B.Sc. Degree in Chemistry and worked in many areas of the industrial and commercial coatings industry. His niche was providing products and technical assistance to address environmental and performance requirements to the specialty coatings market. In true entrepreneurial spirit, Mr. LaGrange began first in his basement where he was the consultant, research and development chemist, manufacturer, shipper, purchaser, receiver and bookkeeper. He expanded to his garage, but in short order leased a facility in Edmonton and began to grow his team of experts. In 2010 he built his own state-of-the-art R&D and test laboratory and manufacturing facility in the Riel Business Park in St. Albert, AB, along with an excellent reputation for formulating solvent-free elastomers and fire retardant coatings. Quantum Chemical continues to be a Global Leader in innovative specialized coatings in particular, fire resistant and environmentally-sound protective coatings.

We have over 30 years’ experience providing the most effective and innovative solutions, ensuring operations across the world are repaired and protected in the fight against corrosion, erosion and chemical attack. Our expertise delivers a lasting performance for equipment and structures in all environments – from extreme to mild, from dry to underwater, from underground to above ground. We provide solutions for abrasion resistance, chemical resistance, emergency repair, high temperature, pump efficiency, high impact resistance and more. Our technical expertise supports industry-leading organizations in the fields of Oil & Gas, Petrochemical, Marine/Shipbuilding, Infrastructure, Power Generation and Renewable Energy.

"Royal Coatings manufactures protective coatings for industrial and marine applications. Our corporate headquarters is in Belle Chasse, Louisiana, on the intercoastal canal outside New Orleans. We currently manufacture our protective coatings at 5 locations across the U.S. and have expanded our facility five times in the last 28 years. Our worldwide distribution and representative network allow us to support projects on every continent. Some of the industries we currently serve are marine, oil & gas, and general infrastructure. Royal Coatings was founded in 1992 by engineer and businessman Owen Jones to develop technologies to improve worker safety. Jones noticed workers frequently being injured when applying hot oils and greases for corrosion protection to the inside of barges. Void Kote™, our water-based protective coating, was soon developed and adopted across various industries. Today, two out of every three barges on the Mississippi River have been coated with Royal Coatings products."

DarCole Products, Inc. originated in 1984 and later became incorporated in 1986. DarCole was named after Billy D. Frields’ two children, Darin and Nicole Frields. We are proud of our standing as the first admixture company developed being dedicated solely to the Mobile (Volumetric/On-site) Mix Industry. We at DarCole Products feel that a one on one customer relationship is essential. We routinely go that extra mile for our customers, showing them the advantages of using our admixtures will enhance their final product while generating cost savings at the same time. DarCole is also dedicated to providing our customers continuous technical support. We have made it a priority to manufacture and distribute admixtures that are both user and environmentally friendly.

Your ChemCo is an innovative chemical company which services many markets.

"In 1959, Arthur R.Monteith established a company to engineer and manufacture specialized industrial coatings - A.R.Monteith Inc. The company has grown steadily on the strong foundations of its innovative formulations, flexible manufacturing capabilities and a willingness to experiment in new and developing markets. During 2005, the business became a subsidiary of Dominion Colour Corporation (the globally respected pigment manufacturer) and assumed its new legal identity, A.R.Monteith Corporation. Monteith is now a leading manufacturer of specialized industrial coatings, dispersions and digital printing ink systems. Our passion in developing new products and perfecting manufacturing processes is recognised by our customers Worldwide. And, our commitment to delivering the highest standards of service, consistency and compatibility has earned us a reputation that we are justly proud of."

With nearly 30 years of experience, TUFFLEX POLYMERS has a proven track record of providing high-performance elastomeric surfacing solutions engineered to protect pedestrian, vehicular, buried membrane construction and specialty applications from varying levels of impact, abrasion and deterioration. Originally founded in 1985 to meet the demands of the ski resort industry, TUFFLEX’s product line has grown to encompass a wide variety of markets, including ship decking and any interior or exterior surfaces that require superior waterproofing protection. Much like our name, TUFFLEX products provide the perfect combination of toughness and flexibility, providing resistance to freeze-thaw cycles, the extremes of thermal shock, and substrate expansion and contraction in addition to providing protection against the deteriorating affects of UV rays. These solvent-free, zero VOC, liquid-applied coatings can be used in new construction or to repair existing surfaces. Additionally, they cure rapidly, allowing for quick and easy installation.

Metalcrete Industries was founded in the year 1908 under the name Klein Manufacturing Company. Klein Manufacturing's top-selling product was a metallic aggregate floor resurfacing material called "Metalcrete". Over the years, Klein Manufacturing Company became world-renowned and earned a reputation for manufacturing exceedingly tough, high-strength floors. Klein Manufacturing Company's name was later changed to Metalcrete Corporation of America to reflect the success that their Metalcrete metallic resurfacing product achieved. Now operating under the name Metalcrete Industries, the company's product line has developed into over 150 specialized products to meet the demands of today's tough industrial requirements. Metalcrete Industries employs a solutions-based business model by teaming up with architects, engineers, and contractors to identify challenges and solve problems faced by maintenance managers and building owners. Metalcrete sets itself apart by distributing a product line that outperforms and outlasts conventional commodity building materials.

3B-the fiberglass company is a leading developer and supplier of glass fiber products and technologies for the reinforcement of thermoplastic and thermoset polymers. We operate 3 state-of-the art manufacturing facilities located in Battice (Belgium), Birkeland (Norway) and Goa (India) as well as a dedicated R&D Center in Battice (Belgium) and a Customer Service Center in Brussels (Belgium, at the very heart of Europe). Our products are designed and optimized to serve the automotive industry, the wind industry and to be incorporated in performance composites.

With over 50 years experience, LymTal provides innovative solutions utilizing the latest polymer technologies to create the highest quality products in the industry. Our expert technical service and support combined with dedication to both Research & Development and manufacturing excellence ensures product consistency and quality. To that end, all of our Iso-Flex products are developed and manufactured in a controlled environment within our own USA based facilities. Our combination of manufacturing and construction experience brings unique benefits to engineers, owners and contractors. The Iso-Flex product line of traffic coatings, roof coatings, sealants, penetrating sealers and expansion joint systems provides a complete package of products for the protection of concrete structures. In addition to its premier Iso-Flex product line, LymTal is constantly expanding its role by providing innovative and custom new products, private labeling, toll manufacturing, and toll packaging services.

Just about every major North American brand of polyethylene, polystyrene, and polypropylene products flows through your Osterman channel. But what else would you expect from a leading prime distributor of PE, PP, PS, PET and engineered thermoplastics? As one of the largest traders and polymer distributors in the industry, we're on a first-name basis with the sales, production and engineering experts who deliver for us – so we can deliver for you. Our close relationships help ensure availability and pricing that make sense for your business. We can also recommend application solutions and alternatives that can improve your output, productivity and profitability.

Since 1999, SureCrete has been the leader in high-quality, innovative, decorative and restoration concrete solutions. Our company was founded on the idea that installers need not be chemists to deliver the looks, finishes and solutions their customers want. Continuing in that tradition, the SureCrete brand has become synonymous with innovative materials and systems for decorative concrete installations. We manufacture over 1400 products from our Central Florida plant ranging from products to create and enhance concrete floors, walls, countertops and architectural concrete castings. SureCrete has always desired to simplify cement technology so that the applicator can use their talents solely on their craftsmanship rather than being a chemist. In 1999, SureCrete formulated the industry’s first full line of single component overlay bag mixes. This technology allowed for a zero VOC, self-bonding, just add water formula that delivered the strongest freeze thaw bond strength of an overlay to concrete to date.

POLYQuik provides high-performance concrete repair products, color-stable coatings, fillers and sealants, floor coatings, primers and spray coatings for a wide range of industries and applications. POLYQuik is a division of Willamette Valley Company, a leading-edge multinational corporation that manufactures and distributes a wide variety of custom products and services throughout the world. Founded in 1952, our innovative solutions and expertise supports more than a dozen industries and specialties. We are a research and development-driven manufacturer of chemical productions and application equipment for those working to meet the ever-changing demands of their industry. We are committed to providing viable solutions for our partners through science, creativity and innovation. We offer manufacturing and engineering capabilities in Oregon, Louisiana, Georgia, Minnesota, Canada, South America, and Europe. Our business is ISO certified to ensure consistency and deliver the highest possible quality for our customers.

Res-Tek is a leading U.S. manufacturer dedicated to the formulation and production of seamless commercial and industrial flooring systems, concrete deck coatings, and polymer concrete repair mortars. Our innovative, proprietary product lines, based on high quality reactive acrylic resins (methyl-methacrylate) and cementitious urethane, are reliable, durable, and fast curing; offering a superior solution for the most challenging environments.

Euclid Chemical is a world leading manufacturer of specialty chemical products for the concrete and masonry construction industry. For over a century, Euclid Chemical has built a reputation on quality products, innovation, and putting people first. Our team of industry experts provides service and support that make working with us easy. Euclid Chemical can provide solutions before, during and after your project is complete. Our business development group and sales representatives approach each project with a wealth of technical expertise and product knowledge. Our products can be used in a variety of capacities, but the "know how" is where we truly deliver.

"Davlin Coatings is a California business established in 1968. We manufacture a complete line of coatings – architectural and industrial – as well as many specialty coatings including the ACRYLASTIC line of waterproof elastomerics. ACRYLASTIC was born in 1975 out of a need for coating with superior water-proofing characteristics, adhesion, toughness and elongation. Davlin’s experience in flame-retardant coatings stems from being one of the best manufacturers of these coatings in the world. Our product was chosen by NASA to protect cargo containers carried aboard the Space Shuttles fleet. ACRYLASTIC stands at the top in the development of quality waterproof elastomeric coatings. Davlin’s Acrylastic product line offers elongation rates up to 2100%, tensile strength up to 2000 p.s.i., adhesive characteristics similar to an epoxy glue and the durability of an acrylic. Our booth at trade shows will feature three product; Cap Seal, the Cool Roof Kit and the Deck Coatings Kit. Cap Seal has a 40 year history of success. Our Cool Roof Kit meets California Title 24 requirements and has an aged SRI rating of 105. The Deck Coatings Kit can cover 100 square feet with superior waterproofing properties while maintaining a low cost to the consumer."

Adhesives Technology Corporation (ATC) is a leading manufacturer of construction and industry-related adhesives in epoxies, urethanes, acrylics, ester blends, and polyureas. With over forty years of field-proven experience, our product brands like ULTRABOND®, MIRACLEBOND®, CRACKBOND®, THE CRACKER®, and HARD-ROK, are some of the most recognized and most often specified products in all of North America. Our products can be used for anchoring, doweling, bonding, joint filling, concrete repair, maintenance and restoration across many industries including but not limited to; heavy duty construction, industrial, MRO and consumer/DIY. We have one of the broadest selections of adhesives and packaging systems of any manufacturer in the industry, and recent acquisition by Meridian Adhesives is expanding that offering every day. Whether you’re looking for high strength adhesives in a 1-ounce syringe, small 6 oz. cartridge or a 150 gallon kit of low viscosity repair adhesive, you’ll find the product to fit your needs.

P3 is an innovative technology company that creates and manufactures coatings and adhesive polymer solutions. Our core philosophy at P3 is to utilize these durable, environmentally safe and proven applications to improve existing and new infrastructure components. In order for infrastructure asset owners to extend service life, minimize disruptions and maximize driver safety, industry standards must be elevated to stand up to increasing demands on roads and bridges. P3 helps project managers achieve and exceed these goals with our high-performing and long-lasting solutions.

The company offers a complete assortment of paints, paints and thinners for any substrate or for any environment, in a wide range of traditional and non-traditional shades. With regard to the chemical base, the company is a leading Czech specialist in the production of synthetic coatings, but at the same time, water-based products are also represented in the assortment. In addition to final paint materials, a number of customers also find high-quality production of modern synthetic resins as basic raw materials for their production. Development of own products: In the field of development, the company has top-notch facilities well-equipped laboratories and highly experienced specialists. These capacities, which are exceptional by Czech standards, are used and highly valued not only from the point of view of the company's ability to regularly introduce quality novelties to the market, but also from external professional partners who often request various tests, advice or other services.

PPG: WE PROTECT AND BEAUTIFY THE WORLDâ„¢ At PPG (NYSE:PPG), we work every day to develop and deliver the paints, coatings and materials that our customers have trusted for more than 130 years. Through dedication and creativity, we solve our customers biggest challenges, collaborating closely to find the right path forward. With headquarters in Pittsburgh, we operate and innovate in more than 70 countries and reported net sales of $14.3 billion in 2016. We serve customers in construction, consumer products, industrial and transportation markets and aftermarkets. To learn more, visit www.ppg.com and follow @PPG on Twitter

Founded in 1980, Genesee Polymers manufactures silicone-based products for various industrial applications. These include mold release agents, electronics, pharmaceuticals, cosmetics, paints, coatings, paper treatment, printing inks, and textile softeners. The company is located in Burton, MI, and ships directly from there. Genesee Polymers' focus is on developing technologically advanced polymers and formulations based on customer requirements, delivering them on time for the benefit of customers, shareholders, employees, and suppliers. They prioritize research and development and continuous process improvement to ensure innovation, quality, and efficiency.

Partners in Chemicals© is a supplier of chemical raw materials and additives with global presence through local partners and branch offices in Europe, USA, Middle East and China. Partners in Chemicals© is a group of companies consisting of Chemical Distribution & Trade B.V., ICG Specialty Chemicals B.V., and Deltachem (Qingdao) Co. Partners in Chemicals© has a wide product range covering all main industries. Our products are being sold from local stock through our local partners our branch offices with knowledge of the local customs avoiding cultural and lingual barriers. As we have been investing in our Asian presence and joint our strengths in cooperation with our Chinese partner Deltachem (Qingdao) Co., LTD we consider ourselves specialists of the Asian polymer additives production market. Our polymer additive range is being sold under our brand name OMNISTAB© and produced in Asia by our production partners under toll manufacturing agreements and/or long ter partnership agreements. Our partners produce based on western ISO standards and quality guarantees. Customer production audits are one of our key values as we tend to be as transparent as possible on all our business.

"Since 1974, Specialty Products Inc. (SPI) has continued to be a premier manufacturer of spray-applied Polyurea Elastomers, Polyurethane Foams and custom Plural Component Equipment. Headquartered in Lakewood, Washington, SPI also has operation centers in Chicago Illinois, and Anchorage Alaska. We provide our clients with a one-stop shop solution through manufacturing our own products and equipment, and providing 24/7 technical support. Our unique testing environment allows our chemists to rapidly produce and test product variations, and quickly bring them to market. This ensures you will have a product that is formulated with the exact physical properties to meet your individual project needs. SPI provides superior technical customer service and continuously educate ourselves on the latest industry technologies. Our qualified personnel provide comprehensive, hands-on training classes to educate clients, contractors, fabricators, and OEM engineers on how to properly use plural component spray equipment and apply all of our products. SPI is a founding member of the Polyurea Development Association (PDA). With a technical staff of a combined total of 180 years of experience, SPI is your trusted source for polyurea coatings, foam products and spray application equipment."

For over 25 years, Return Polymers has been a leader in the development, implementation, and delivery of recycled PVC compound solutions for our supplier and client partners. We are driven by our core tenants of Safety, Quality, Integrity and Customer, resulting in unparalleled safety records, product consistency, customer satisfaction, supply chain excellence, technical leadership, environmental sustainability and cost effectiveness. The proven management team has over 100 years of PVC-specific industry and technology expertise in companies that range from technology start-ups and distribution to light manufacturing and large multi-national corporations. Return Polymers serves clients in every PVC market segment, including siding, windows, fence, pipe, sheet, electrical, point of purchase, custom extrusion, appliance, injection molding, compounding and raw material suppliers. The attention to detail and unsurpassed quality has ensured Return Polymers remains the preferred supply chain partner.

Wesco Refractories, Inc. is a leading manufacturer of refractories in the United States. What sets us apart is our unrelenting focus on quality, consistency and service. Our production facilities and quality control systems are designed to deliver consistent, superior-quality products. This allows us to keep our prices competitive, and to offer our customers efficient turnaround times. In addition, our engineers use the most advanced technologies available in the marketplace, allowing them to develop customized solutions for even the most difficult applications. Finally, we back every product we produce with exemplary service to ensure that every client need is being met, every time.

Aliancys is a leading global company active in the sales of Quality Resins for composite applications. Together with its customers, Aliancys is pushing the limits of both composite part manufacturing and performance. Taking an integral approach to new product development, Aliancys is using its full expertise in resin chemistry, material science, and component manufacturing for shaping new applications in composites. So let’s talk and increase our mutual business success, both today and tomorrow.

Gaco is a recognized leader in innovative silicone roofing systems, and offers best-of-class waterproofing and insulation solutions for a variety of commercial, industrial, and residential applications. The company’s headquarters is located in Nashville, Tennessee and the company’s state-of-the-art manufacturing, research and development facility in Waukesha, Wisconsin. Gaco has manufactured waterproofing and insulating solutions for commercial, industrial, and residential applications since 1955. Today, Gaco products cover millions of square feet of buildings in every climate, and we remain one of the only single-source solution partners for building owners. Controlling the entire process saves you from wasting time and money — whether you’re the one on the roof, under it, or designing it. Let us protect your building from the elements and provide the guaranteed performance you want. Contact your local Gaco representative today, and let’s start a conversation.

"Foundation Armor is a leading manufacturer of industrial grade concrete sealers and coatings. Our products are used to seal everything from concrete driveways and basements, to parking garages and bridge decks. Not sure which concrete sealer is the best concrete sealer for your application? Live Chat with us, or call us at 866-306-0246. About Us: Foundation Armor is a family owned concrete sealer and coatings manufacturer. Our primary focus is our customers, and our dedication to them is reflected in the quality of our products and the level of customer service we offer. We believe in manufacturering high quality industrial-grade products, providing honest information and technical advice, and ensuring that the products we suggest are the best products for our customers' applications. All of our products are manufactured in the USA, and we don't use recycled or imported resins. Whether you are just browsing, trying to find an answer to a technical problem, or have done your research and are ready to purchase, you can contact us direct via Live Chat or by phone. We do not use a call center and the person on the other end of the chat or phone is genuinely there to help! Where to Buy: You can buy direct from us, or from other online retailers such as Home Depot, Walmart, Amazon, or Houzz. In order to maintain a high standard of customer service and technical support, our products are currently not offered in stores. "

Adhesive Prepregs for Composite Manufacturers is one of the industries top Prepregs manufacturers. We are a developer of thermoset epoxy prepregs for the manufacturers, designers and hobbyists of composite parts. Adhesive Prepregs has been manufacturing prepregs since 1992. APCM, LLC. is a growing member of the composite industry. We are currently striving to bring this highly technical form of manufacturing to the open market. We produce an uncompromised light weight, high strength material. Determination and longevity will prevail in this endeavor. APCM, LLC. began in 1992 with principle members from McCann Manufacturing Co. APCM, LLC. has developed innovative ways to produce and customize prepregs that are lighter… stronger… and faster to use. We’re a cooperative group of craftspeople founded by David L. Young. David is formerly from McCann Manufacturing Co., Inc. Adhesive Prepregs for Composite Manufacturers has a combined 30 years of experience in the manufacturing of Epoxy Adhesive Prepregs.

"Marex Composites is part of a global organization that distributes and finishes structural core materials. Marex Composites started in 2016 and has a young venture partnership that is able to customize standard finishes by scrim, score, infusion grooved, perforated, slit and plain. Marex finishes Maricell PVC foam material into lightweight core materials in order to meet specific customer’s needs. Marex Composites is also able to finish balsa core materials. If your company needs a finished product quickly, Marex Composites is experienced, dependable and has a short lead time."

3A Composites Core Materials is a global organizational unit within the 3A Composites Group, a part of Schweiter Technologies (SIX Swiss Exchange: SWTQ), with operations in Europe, the Americas, China and Papua New Guinea. We are a global leader with the broadest portfolio of high-performing and sustainable core materials with main focus on PET foam and balsa wood. We are the pioneers in sandwich technology with more than 75 years of experience. Since the very beginning our focus has been developing strong and solid, lightweight core materials, which allow manufacturing more durable, sustainable and energy-efficient end products for our customers.

Miracote® products, by Crossfield Products Corp., provide Scientifically Superior technologies for plywood and concrete protection and restoration offering a complete line of protective coatings, waterproofing membranes, and repair materials.

"L & L Coatings Corporation is a full service manufacturer of water-based elastomeric coatings. Our coatings provide a durable, appealing, waterproofed seal on primed ferrous and non-ferrous metal, galvanized steel, masonry, fiberglass, transite and most construction, insulation and roofing materials. It stops water from entering and air from escaping by sealing up all potential leak areas. Located in Tampa, Florida, L & L has provided coatings used for waterproofing, fumigation containment on tobacco warehouses and creating water-tight seals on metal roof decks. We have been in business since 1972, and continue to live up to our standards by providing the highest quality of elastomeric coatings."