Products in Transportation: Vinyl Esters

Crystic® Vinylester Resin VE671 is an epoxy Bisphenol A based standard vinyl ester resin. It has outstanding chemical resistance to a wide range of substances, (acids, alkalies, oxidising agents) at room and elevated temperatures. The product is suitable for fabrication of fiber reinforced composites by all conventional techniques (contact molding, filament winding and injection molding) and for use in many chemical processing industry applications (storage tanks, vessels, ducts).

Crestamould® VE 690PA is a pre-accelerated, thixotropic, modified vinyl ester resin. This product is developed for use as a skin coat in tooling and marine applications. It has excellent blister resistance, and it significantly reduces the occurrence of print-through to produce durable moldings with an enhanced surface finish.

Crystic® Vinyl Ester Resin VE 679PA is a pre-accelerated, thixotropic, DCPD modified, vinyl ester laminating and tooling resin with excellent surface finish for marine skin coat as well as for tooling applications. It has a gel time of 23 minutes.

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

Crestamould® VE 679PA is a pre-accelerated, thixotropic, DCPD-modified vinyl ester resin. This product has been developed for use as a skin coat in marine and tooling applications. It has excellent blister resistance, reduced print through, a 23-minute gel time, and Lloyd's approval.

Polycryl PPS-G-620 Green is a refinishing vinyl ester tooling gel coat. These coatings are vinyl ester urethane hybrids with a unique low hap chemistry. They are MACT Compliant and meet current Federal regulations regarding emissions.

Epovia Optimum® KRF-1031 is bisphenol-A epoxy vinyl ester resin with low viscosity, low color, low foaming, fast cure, lloyd's approved and it is generally used in marine applicatons.

Polycryl C-501 Clear is a vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Gilliner® 1566 and 1566T is a high impact resistant grade liner constructed of woven E- and S-glass cloth with a modified vinyl ester resin system to optimize strength, weight and cost. This product offers superior mechanical properties and higher strength-to-weight ratio compared to all E glass constructions. 1 mil. white polyvinyl fluoride film overlay on the face side is included for Gilliner® 1566T.

SIMPREX® M940-200 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M940-200 has a medium tack. It can be cured at lower temperature (205°F) and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

SIMPREX® M850-200 is an advanced vinyl ester prepreg designed to provide the highest performance-to-cost ratio. SIMPREX® M850-200 has a medium to high tack. It can be cured at lower temperature (205°F) and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

EPOVIA RF-5000 - Urethane modified vinyl ester resin for SMC-BMC,good thickening. It is generally used in Automotive applicatons

Polynt Group 787-0790 - toughened vinyl ester resin offers dramatically improved fracture toughness resistance over typical vinyl ester resins; unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

Polynt Group 787-2599 - toughened vinyl ester resin offering improved fracture toughness and crack resistance; unthixed, unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

Polycor® Tooling VE SP gel coats are specifically formulated with selected vinyl ester resins that exhibit high heat distortion temperature to withstand the repeated molding of FRP laminates. They provide a high gloss and hard durable surface. These tooling gel coats are ready to be sprayed after the addition of the proper amount of the appropriate of promoters, then the right amount of methyl ethyl ketone peroxide. Read application instructions carefully, because even though manufacturing precautions are used to make tooling gel coat, a misapplication of these products can produce unacceptable results.

Arjay Technologies 7121 Vinyl Ester is specially formulated with Bisphenol-A based epoxy vinyl ester resin for superior physical properties when compared to polyester resins. This has made it the ideal choice for many marine applications where the bonds are structurally critical. It is best known for its critical bonding applications.

Polycryl PPS-B-630 Black is a refinishing vinyl ester tooling gel coat. These coatings are vinyl ester urethane hybrids with a unique low hap chemistry. They are MACT Compliant and meet current Federal regulations regarding emissions.

Ilkalem AS PV-300T is Bisphenol-A epoxy vinylester thixotropic resin for GRP applications.

Epovia Optimum® BC 4200 PA - vinylester barrier coat for spray application. Main applications areas are building and construction, composites, industrial sector, marine etc.

SMCarbon® 24CF50-12K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Epovia Optimum® KRF-2000SE is brominated vinyl ester resin for hand lay up-filament winding with low color, low foaming, fast cure and it is generally used in building and construction, chemical industry, industrial sector, railway sector applicatons.

Polycor® Tooling VE BR Neutral 0000 - speciality vinyl ester based gel coat formulated to provide our highest level of heat resistance. A high gloss durable surface, resilient to the repeated molding cycles of composite production. High levels of styrene and chemical resistance.

SMCarbon® 24CF60-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

SIMPREX® M730-200 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M730-200 has a medium tack. It can be cured at lower temperature (205°F) and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

ARMORSTAR VE IVSXH210 is generally used in Automotive,Building and Construction,Composites,Industrial sector,Marine,Mass Transports,Mold manufacture applications.

Polynt Group 781-6010 - toughened vinyl ester resinthat offers improved fracture toughness and crack resistance; unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

SIMPREX® M745-200 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M745-200 has a medium tack. It can be cured at lower temperature (205°F) and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

SIMPREX® M745 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M745 has a medium to high tack and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

SIMPREX® M940 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M940 has a medium tack and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

Eternal Materials 2968PT-689 Series is vinyl ester based structural adhesive.

ARMORSTAR VSXH Series is generally used in Automotive,Building and Construction,Composites,Industrial sector,Marine,Mass Transports,Mold manufacture applications.

SMCarbon® 24CF50-50K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These materials with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Quantum Composites QC-8560 is a vinyl ester chopped E-glass fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density.

Polycryl B-501 Black is a vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

SIMPREX® H425 is an advanced vinyl ester prepreg designed to provide excellent fire retardance properties (V-0 flammability rating). It is ideal for manufacturing sandwich structures, providing good adhesion to core materials such as Nomex® honeycomb, balsa and foams. SIMPREX® H425 is a great choice for many applications in the range of low to medium service temperature, where a high degree of fire retardance is required.

Polycryl B-602HT Black is a high temperature vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent high temperature specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.