Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Features
- Superior Gloss and Chemical Resistance.
- High Heat Distortion Temperature.
- Excellent Cure, High Barcol.
- Low VOC, MACT Compliant.
Applications & Uses
- Markets
- Applications
- Application
- Agitate slowly but thoroughly and bring temperature into 70-80° degree range.
- Catalyze at 2.0% with United Initiators 925H or Akzo Nobel L50a, no equivalent. No reduction or other additions are necessary.
- For best results apply with conventional air assisted airless equipment. 1840 –
- .1850 tip size.
- Fluid pressure approximately 35 – 45 lbs.
- For air assisted airless equipment, utilize approximately 25 – 35 lbs. of air assist.
Properties
- Color
- Typical Properties
Value Units Test Method / Conditions Viscosity 12,000- 16,000 CPS - LVF (#4 At 6) 1,600 - 2,200 - - LVF (#4 At 60) 2,700 - 3,500 - - LVF (#4 At 30) 6.0 – 8.0 - - Thix Index 18 - 26 - - Gel Time (2.0% United Initiators 925H) 2021-07-12 - - Gel To Peak 375 – 405 - - Peak Exotherm (F/100 gm) 35 - 38.5 % - HAPS 35-40 % - 934 Barcol 30 gram qt.Lid (1hour) 40-45 - - Barcol (24 hours) 9.1 - 9.2 lbs. -
Safety & Health
- Precautions
- DO NOT apply excess or uneven film thicknesses as pre-release and or porosity may result.
- Catalyzed masses will get extremely hot, volatilize and crack. Avoid catalyzed mass accumulations/waste as contact with skin or combustibles/flammables can result in injury or fire.
- While these products do achieve a casting 934 Barcol hardness of 35 – 40, do not expect to read those figures if checking Barcol hardness of the tool itself. Barcol Impressors require 31 cured mils minimum to register the hardness of film. That thickness is not achieved from 30 or 40 wet mils with conditions of evaporation and shrinkage. A Barcol point/impressor may penetrate the Tool’s gel coat and read higher if encountering glass or lower if resin.
- Plugs, pumps, spray guns, and product containers should be properly grounded before use.
- A good high quality high temperature paste wax or a liquid semi-permanent product is highly recommended.
Storage & Handling
- Stability-Shelf Life-Storage
These products are stable for 2 months if stored below 77 F and out of direct sunlight, in original
UNOPENED CONTAINERS.