Products in Automotive & Transportation: Gears

PA 6 reinforced with glass fiber, flame retarded

Manifattura Cattaneo PE UMW material has a high resistance to chemicals, absorbs little water and has good electrical properties. It is normally used with temperatures between –40 ° C and + 80 ° C and is resistant to water, saline solutions, acids, alkalis, alcohol and petrol. Below 60 ° C PE is insoluble in all organic solvents.

Taulman 3D Alloy 910 is a significant development from taulman3D. The goal was to provide a material with very high tensile and sufficient elongation to maintain a high degree of durability. Alloy 910, when 3D Printed comes in at 8,100 PSI tensile and close to 12,000PSI when injection molded. It has become a trusted additive material for top aerospace and automotive companies globally. With a combined tensile strength higher than the strongest co-polyesters, the durability of nylons, a shrinkage factor that rivals our t-glase, a vast range of chemical resistance and a 82°C working range, you now have one solution easily printable at 250°C-255°C.

GEHR PA® 6 C is a high-molecular and stress-reduced PA 6, which shows a very tough behavior and which was produced by casting. Our round rods and sheets in natural color comply with the food contact regulations according to 10/2011/EC.

POM-GB20, POM copolymer, medium viscosity, 20% glass ball reinforced

Pentamid A S GV30 H FR natural is a low viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced, flame retardant.

Polyurethane (PUR) based compound. Glass fibres. Very good noise reduction. Good impact resistance even at low temperature.

Resinoid 2002-4A is a fabric reinforced, two-step phenolic molding compound. It has been modified to meet gear requirements and other stressed applications. It possesses excellent impact and flexural strength. It is available in bulk form and is recommended for compression or transfer molding.

Pentamid B GV30 H UV natural is a normal viscosity, heat and uv stabilized polyamide 6, 30% glass fiber reinforced.

Titacon® MS904 is a 4％MOLYBDENUM DISULFIDE FILLED, WEAR RESISTANCE, MEDIUM FLOW.

Ketoprix™ EKT33G3L are thermoplastic aliphatic polyketone compounds where the polyketone base polymer consists of perfectly alternating α-olefins and CO to give the 1,4-diketone polymer backbone structure. To this base resin, fiber reinforcement, additional thermal stabilizers and lubricants are added to achieve desired mechanical performance and to assist in injection molding.

Pentamid B GV30 D black is a normal viscosity, heat stabilized polyamide 6, 30% glass fiber reinforced, reduced moisture absorption.

ESTOPLAST EP 1500GY164 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Polyamide 6 general purpose

ESTOPLAST EP 1500WW06 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Pentamid B GV35 H black is a normal viscosity, heat stabilized polyamide 6, 35% glass fiber reinforced.

BARLOG plastics GmbH Kebablend® / WR 04/1310/2115 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

LOXIAMID PA6 LU HS1 03005 is an injection molding grade of lubricated Polyamide 6 resin.

VICTREX® 450G is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

LiNNOTAM with solid lubricants, additives and stabilizers finely distributed in the material. LiNNOTAMGLIDE Pro T has self-lubricating properties due to the added components and shows excellent wear resistance at very high low coefficient of friction.

Next Polymers Next Nylon 6 Prime Series NMS1-01 S.GY. is PA6 MOS2 filled Steel gray compound.

Glass Sphere Reinforced Nylon Resin (PA6)

ESD E2115 belongs to ESD Polyoxymethylene (Acetal) Series with Anti-static, High mechanical strength, Static dissipative and Good toughness.

Amilan® CM3001-N is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Sollamid A 2730 is the formula for Heat Protected Polyamide.

LOXIAMID PA6 LU HS1 03008 is an injection molding grade of lubricated Polyamide 6 resin.

Pentamid B GV30 H LS black is a normal viscosity, heat stabilized polyamide 6, 30% glass fiber reinforced, laser markable.

BARLOG plastics GmbH Kebablend® / WR 02/2110 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

Pentamid A GV35 HYD black is a normal viscosity, heat and hydrolysis stabilized polyamide 66, 35% glass fiber reinforced.

Acetal-C + 25% Glass is a high-quality engineering plastic material. It is Acetal-C reinforced with 25% glass fiber.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified

CP-Polymer Technik Wellamid® GF30-60 42LH-N is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® GF30-60 42LH-N: Eco-Friendly/Green.

Titacon® CF910 is a 10％CARBON FIBER REINFORCED, WEAR RESISTANCE, HIGH STIFFNESS/STRENGTH.

BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

PA 6 reinforced with glass fiber, heat stabilized

Sollamid B 2700 is the formula for Standard Polyamide. Sollamid B 2710 is the formula with external lubrication.