Products in Automotive & Transportation: Polyethylenes

SGF4950HS is a High Density Polyethylene copolymer that provides a remarkable combination of good processability and excellent stress cracking resistance (ESCR). It is highly recommended for manufacturing containers, flasks, and bottles up to 30 liters for transporting chemical products. This grade has a minimum biobased carbon content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

Braskem America UTEC® 4041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than high density polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America UTEC® 3041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America UTEC® 3040 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America UTEC®4040 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem GF4950HS is a high density polyethylene copolymer offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products.

For more information regarding REACH, please visit Braskem's site

LNP THERMOCOMP FX10009 compound is based on Polyethylene (PE) resin containing proprietary fillers. Added features of this grade include: Improved Dielectric Properties.

SABIC's Specialties Business LNP STAT-KON FX98501 compound is based on Polyethylene (PE) resin containing conductive carbon powder and glass fiber. Added features of this grade include: Electrically Conductive. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

TIVAR® Sterra™ UHMW-PE shapes are produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling, automotive, and transportation. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, and guides, rollers, conveyors, chutes, hoppers, impact plates, and asphalt equipment components. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

LNP LUBRICOMP FL004 compound is based on Polyethylene (PE) resin containing 20% PTFE. Added features of this grade include: Wear Resistant.

LNP STAT-KON FX98500C compound is based on Polyethylene (PE) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive.

AquaKlean 403 is an anionic paraffin/polyethylene wax emulsion ideal for cleanability and water repellency in architectural coatings.Features and Benefits Provides excellent initial water beading and long term water repellency. Imparts soil release for improved cleanability. Imparts slip, antiblocking, scratch and abrasion resistance. Wax emulsion particle does not reduce gloss or clarity. Anionic emulsion stabilization contributes to immediate hydrophobicity.

Polyfluo® 900A unique ceramic fortified composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance, surface durability and anti-blocking.Features and Benefits High performance product for maximizing surface abrasion resistance (Taber) and film toughness Fortified with hard, inert, semi-transparent spherical ceramic for maximum abrasion resistance Low density polyethylene provides superior surface toughness, durability and mar resistance PTFE enhances abrasion resistance, antiblocking and film hardness Easy to disperse fine powder that can be incorporated with high speed mixing

Superslip™ 6515AL is a highly engineered HDPE/amide wax/alumina nanocomposite for maximum scratch, scuff and block resistance.Features and Benefits Maximum scratch resistance; equal to PE/PTFE additives HDPE/amide wax composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Good abrasion resistance with slip and lubricity Amide wax component provides excellent antiblocking and release properties Ideal for can and container coatings; 21CFR 175.300 approved Compare to Superslip 6515XF

Polyfluo® 523AL ia A highly engineered HDPE/PTFE/alumina nanocomposite for unsurpassed scratch and scuff resistance.Features and Benefits Maximum scratch and scuff resistance with slip and lubricity HDPE/PTFE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Easier-to-disperse nanotechnology in a safe, non- nano powder Composite particle density maximizes efficiency and minimizes settling Extra fine particle size provides excellent gloss retention and film clarity Composite wax/alumina particle is less abrasive on processing equipment compared to free alumina

PolyGlide® 1226XF is a highly engineered HDPE/ceramic/nanoceramic composite for abrasion resistance and lubricity.Features and Benefits HDPE composite reinforced with hard, inert ceramic microspheres and nanoceramic platelets Improved Taber abrasion resistance when compared to PE/PTFE additives Provides slip and lubricity Ideal for can and container coatings; 21CFR 175.300 approved Effective replacement for PTFE additives Compare to (coarser) Polyfluo 900

Excelene 5005 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

AquaGraft® 1-5150 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

Excelene 4963A are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Excelene 3150B are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Excelene 3151 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

Aquagraft® 1-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

Excelene 3125 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

HydroCER 7410 is a 45% aqueous dispersion of medium molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

EXTINITY® 0101-107 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal and ultraviolet stability and can be converted easily on standard processing equipment.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~155 micron, D100 = 300 micron.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70 micron, D100 = 150 micron.

EXTINITY® 0201-312 is a highly loaded antimony trioxide concentrate that can be used for a variety of applications including film, sheet, and extrusion coating. The content of antimony trioxide in EXTINITY® 0201-312 is 80%, by weight. Use of EXTINITY® 0201-312 eliminates the exposure hazards typically associated with handling antimony trioxide powder, since all of the antimony trioxide powder is dispersed, distributed and encapsulated in a LDPE carrier resin.

Terratek® WC200145 is a proprietary blend of wood flour and biobased polyethylene for injection molding applications. WC200145 contains 30% wood flour and with Braskem GreenPE this formulation is fully biobased.

Terratek® WC200140 is a proprietary blend of wood flour and biobased polyethylene for injection molding applications. WC200140 contains 15% wood flour and with Braskem GreenPE this formulation is fully biobased.

PEXIDAN® HF SX623 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX623 has been designed to meet the requirements of IEC 60092-360 SHF2, BS 7655-2.6 SW4 and EN 50264 sheathing applications.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

Arqlite Composite Plastic Pellet is a 100% recycled thermoplastic blend for injection molding and extrusion, contributing to reducing the carbon footprint, increasing recycled content, and reducing the costs of plastic products. This homogenized compound can be used at a 100% concentration or mixed with pure resins (PP, PE, or PET)

EXTINITY® 0101-108 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal stability and can be converted easily on standard processing equipment.

Precision Associates inc. 16801 is an 80 durometer black general purpose Chlorinated Polyethylene elastomer. It exhibits good resistance to heat and petroleum based oils.

Tovo Gomma T 30 EVB is a rubber compound which is white in color and having PE composition.