Products in Marine Coatings

SILRES® IC 368 is a solventless, reactive, methoxyfunctional methyl-phenyl polysiloxane with a narrow molecular weight distribution. It is specifically designed to enhance the weathering and heat resistance of organic resins. This solvent-free liquid resin is ideal for incorporating a compatible silicone component into other binder systems. Its properties make it a valuable additive for improving the overall performance and durability of the resulting materials.

HALOX® 570 is an organic corrosion inhibitor designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. HALOX® 570 is especially effective along weld seams and, in some cases, can also be used in solvent-based coatings and UV-cured systems. HALOX® 570 may be used in formulations based on waterborne acrylic latexes and co-polymers, styrene/acrylic latexes, acrylate epoxy esters, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2-pack polyurethane. HALOX® 570 may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 has a minimal effect on gloss reduction.

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor, HALOX® 570, which requires no dilution. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both water-based primers and direct-to-metal topcoats. In direct-to-metal coatings, HALOX® 570 LS has a minimal effect on gloss reduction.

HALOX® SW-111 is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water-reducible resin systems and corrosion-resistant caulks and sealants.

HALOX® 700 is a white, non-refractive, corrosion-inhibiting pigment used in protective coatings. It provides extended protection in solvent-based and water-based epoxy and urethane coatings through the combination of zinc and aluminum phosphates. When used in alkyd and acrylic coatings, it is recommended to use it in combination with HALOX® Organic Corrosion Inhibitors for optimal performance.

HALOX® 630 is a liquid organic corrosion inhibitor for solvent-borne protective coatings on metal surfaces. It may be used in solventborne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high-solids epoxy esters, alkyds, acrylic resins, and 2 pack polyurethane primers. However, in bake systems, the temperature should not exceed 150°C. It should be noted that yellowing may be observed with reactive isocyanates. HALOX® 630 provides superior corrosion resistance even over poorly prepared surfaces, such as adherent rust or oil contamination.

AFCONA 7201 is recommended for unsaturated polyester, PVC, epoxy, and polyurethane resin systems. It is a moderately strong defoamer, but is not suitable for unpigmented/clear systems, as it may cause in-can haziness. However, this has a negligible effect on final gloss and will not influence other properties of the system.

Portalum® A 25 is produced from refractory agglomerated super calcined (RASC) bauxite. The main constituent is the mineral corundum. The standardized quality of Portalum® A 25 is guaranteed by means of an ISO 9001-certified quality management plan. Raw materials and production are closely monitored to ensure consistency in chemical composition and grain size.

IMSIL® A-10 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-25 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

Portaryte® B10 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

IMSIL® A-8 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-30 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-75 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® 1240 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

AFCONA 5209 is an anionic/cationic wetting and dispersing additive used to improve the wetting of pigment surfaces. AFCONA 5209 is the 100% version of AFCONA 5009. It reduces the interfacial tension between pigments or extenders and the vehicle. It stabilizes the pigments through electrical charge repulsion forces.

IMSIL® A-15 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

Portaryte® B15 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

LIOCRYL AS 320 N is an aqueous styrene acrylic emulsion that is solvent- and plasticiser-free. The emulsion is particularly suitable for the production of matt to glossy paints for indoor and outdoor use and for formulations for tile adhesives. The film dries above the film formation temperature to give a clear coating, shows little tendency to swell in water, and has high saponification resistance. Because of these properties, Liocryl AS 320 is especially suitable for the production of outdoor paints and plastic-bound plasters, as well as for impregnating and priming brickwork and sanding plasters. It has applications in industrial coatings, architectural coatings, metal coatings, marine coatings, crafts and lobby, marine transportation, adhesives, and industrial maintenance.

SYNTHALAT A 065 is an acrylic resin cross-linked with polyisocyanate. Primarily used in combination with aliphatic polyisocyanates for air- and stove-drying coatings for metals, woods, and plastics. These types of 2 components are preferably used in fields where high coating qualities are required but where stoving is impossible due to the size or heat-sensitivity of the object to be coated. Its applications lie in numerous fields, like furniture, marine transportation, wood flooring, industrial maintenance, and marine coatings.

SYNTHALAT A-TS 3277 is a polyisocyanate-curing acrylic resin. It is supplied as 60% in Shellsol A. It is known for its better weathering resistance. It has applications in metal coatings, marine transportation, industrial coatings, industrial maintenance, automotive OEM coatings, and marine coatings. 

LIOCRYL AS 615 is an aqueous styrene acrylic emulsion. It is a styrene acrylic emulsion for use in primers and top coats for metal and other substrates. The emulsion contains no alkylphenol ethoxylates (APEO's), and it is solvent- and plasticiser-free. It has applications in primers and lacquers, marine coatings, Craft and hobby, architectural coatings, furniture coatings, marine transportation, and also in wood flooring.

SYNTHALAT A 060 is an acrylic resin cross-linked with polyisocyanate. Used in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings for industrial paints with good flexibility, adhesion, and resistance to weathering. It has applications in marine coatings, automotive OEM coatings, metal coatings, industrial maintenance, marine transportation, and industrial coatings.

SYNTHALAT F 330 is a short-oil, air-drying alkyd resin. This is suitable for air-drying general purpose primers that can be overpainted with stoving, nitrocellulose, PVC, chlorinated rubber, and 2-component acrylic lacquers without lifting. It has applications in industrial maintenance, marine transportation, marine coatings, primers and lacquers, and metal coatings. 

SYNTHALAT A 156 HS is a polyisocyanate-curing high-solid acrylic resin. Used with high-solid 2-pack coatings that are air- and oven-drying in combination with polyisocyanates, affording high strength and resistance to chemical attack and weathering, the coatings are suitable in particular for large-capacity vehicles and cars and for industrial coating. It has applications in marine coatings, industrial coatings, metal coatings, industrial maintenance, and marine transportation.

SYNTHALAT SF 260 is a styrene-modified short-oil alkyd resin. This is recommended for very fast-drying primers, wash primers, fast-drying synthetic resin-based paints, and hammer-finish paints. It has applications in primers and lacquers, marine coatings, metal coatings, marine transportation, industrial coatings, and maintenance.

SYNTHALAT W 48 is a water-thinnable, specially modified alkyd resin. It is recommended for water-thinnable top coat formulations with good color retention and very good water resistance. It has applications in wood flooring, furniture coatings, industrial maintenance, wood coatings and finishes, marine coatings, and transportation.

SYNTHALAT PL 754 is a urethane modified long-oil alkyd. This is suitable for fast-drying industrial and anti-corrosive lacquers for steel and metallic substrates. It is also recommended for 1-component wood and parquet flloring. It has applications in architectural coatings, metal coatings, marine coatings, industrial coatings, and also in other consumer applications.

SYNTHALAT W 30 is a water-thinnable, short-oil alkyd resin. It is recommended for water-dilutable corrosion protection priming paints with good elasticity and hardness. It has applications in metal coatings, industrial coatings, marine coatings, industrial maintenance, industrial coatings, and marine transportation.

SYNTHALAT F 334 is a short-oil alkyd resin. This product is suitable for primers and single-coat laquers in aromatic-free solvents for universal use with good adhesion to steel, wood, and non-ferrous metals. It has applications in primers and lacquers, marine transportation, marine coatings, industrial coatings, and industrial maintenance. 

SYNTHOESTER 215 HS is a hydroxyl group containing, high solid polyester resin. It is recommended to use it in combination with melamine resins and CAB for base coat enamels. It is also used with aliphatic polyisocyanates for air- and oven-drying 2-pack high-solid laquers and fillers with high mechanical properties, high gloss and body, and very good chemical and weather resistance. It has applications in primers and lacquers, marine transportation, wood flooring, industrial maintenance, marine coatings, and automotive OEM coatings.

LIOPTAL TH 406 is a short-oil alkyd modified with phenolic resin. It is used as fast-drying anti-corrosion primers, synthetic resin-based paints, shop primers, knife fillers, oven-drying industrial products, and top coats. It has applications in metal coatings, primers and lacquers, marine transportation, industrial maintenance, and marine coatings.

SYNTHOESTER TS 2245 is a siloxane-modified, cycloaliphatic, hydroxyfunctional, high-solid polyester resin. This can be cross-linked with polyisocyanates for high-performance, air- and forced-drying 2-pack top coats. It has applications in automotive OEM coatings, marine coatings, metal coatings, marine transportation, and industrial maintenance.

SYNTHALAT A 150 S is an acrylic resin cross-linked with polyisocyanate. Used in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings with high mechanical resistance and high resistance to chemicals and weathering. It has applications in marine coatings, industrial coatings, metal coatings, automotive OEM coatings, and industrial maintenance.

SYNTHALAT A 086 HS is a hydroxyfunctional acrylic resin. Combined with (cyclo-) aliphatic polyisocyanates to produce air- and forced-drying two-pack coatings for common industrial coatings that have strong abrasion, chemical, and weather resistance. Additional characteristics include fast drying and excellent adherence to various metals and subrates. Around 470 g/l of VOC as a top coat at 21 seconds. It has applications in marine transportation, industrial coatings, industrial maintenance, metal coatings, and marine coatings.

SYNTHALAT A 085 is an acrylic resin cross-linked with polyisocyanate. It is used in combination with aliphatic polyisocyanates for air- and stove-drying two-component coatings. It offers good mechanical properties and resistance to chemicals. It has applications in automotive OEM coatings, primers and lacquers, and also in marine transportation.