Products in Adhesives & Sealants: Alkyds

Yuron New Material HPE1505 is an anticorrosive paint with fast drying (ships, bridges, tank, etc.),anticorrosion paint, marine paint, flame-retardant paint, road marking paint and Printing ink like heat resistance ink, package printing ink, etc. and adhesives bonding between rubber and metal improving the adhesion ability of chloroprene rubber, nitrile rubber.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

NEVCHEM® 120 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

Puyang Ruicheng Chemical DCPD petroleum resin RC-D120 is the pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated dicyclopentadiene derived from a special process, at a certain temperature and pressure, formed by the polymerization of low molecular weight polymer. D120 has a good compatibility with ester and polyurethane solvents. In the ester solvent, it has a good compatibility with epoxy resin, furthermore it has a good curing speed with epoxy resin .It can be used as the modifier for the marine paints and some other special paint as well as the shrinkage force to the cement and steel, furthermore, it also can strengthen the wetting property to paint and improve the leveling property of paint film.

NEVCHEM®200 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

DOG Chemie Deotack 940 may be applied in various areas, including adhesives, coatings and polymer processing. It improves the tack as well as pigment wetting and has a high resistance against acids and bases. Furthermore, the product has a water-repellent effect (hydrophobizing).

NEVPENE® 9511 is a thermoplastic low molecular weight, C5 modified C9 hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

CUMAR® 130 is a thermoplastic low molecular weight, hydrocarbon resin produced by catalytic polymerization of predominantly indene and other aromatic monomers.

Fintac 2331 is a modified rosin which offers an excellent combination of oxidation and crystallization resistance. This product functions as a tackifier for SBR, natural rubber, butyl rubber, ethylene-vinyl acetate and other polymers. It can be delivered in flaked and solid forms. Formulated in solvent-based and water-based adhesives, it exhibits no tendency to crystallize. It meets the requirements of the Code of Federal Regulations, Title 21, under the following section: 175.105 Adhesives; 176.210 Defoaming Agents Used in the Manufacture of Paper and Paperboard; 177.2600 Rubber Articles Intended for Repeated Use.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Kamicryl 5010 Thermoplastic Acrylic Resin is an Co-polymer of various Acrylic Monomers available in free flowing solids and solution form. These are extensively used in the formulation of Lacquers and speciality coatings.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Bisomer® S10W is an aqueous solution of a long chain methacrylate monoester based on a polyethylene glycol backbone.

NEVPENE® 9510 is a thermoplastic low molecular weight, C5 modified C9 hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

NEVCHEM®240 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

EVERSTAB LS-292/765 may be used after adequate testing for applications such as: automotive coatings; coil coatings; wood stains or do-it-yourself paints; radiation curable coatings. Its high efficiency has been demonstrated in coatings based on a variety of binders such as: one and two-component polyurethanes; thermoplastic acrylics (physical drying); thermosetting acrylics; alkyds and polyesters; alkyds (air drying); water borne acrylics; phenolics, vinylics; radiation curable acrylics.

Hubercarb® W3NT is a 3-micron calcium carbonate produced in Quincy, IL containing an extremely low level of crystalline silica content enhanced by a propreitary fatty acid based surface treatment.

Yuron New Material HPE1510 is an anticorrosive paint with fast drying (ships, bridges, tank, etc.),anticorrosion paint, marine paint, flame-retardant paint, road marking paint and Printing ink like heat resistance ink, package printing ink, etc. and adhesives bonding between rubber and metal improving the adhesion ability of chloroprene rubber, nitrile rubber.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Bisomer® MPEG550MA is a long chain methacrylate monoester based on an ethylene oxide backbone.

HUATE organoclay BK-922 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Guangxi Zhongchang Resin RA90 resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance. Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Mangalam Organics Limited TERPENE PHENOLIC RESIN DRT-70 are thermoplastic polymers manufactured by copolymerization of terpene hydrocarbons and phenol.