Products in Adhesives & Sealants: Rheology Modifier

ICATACK 281 is a High solids aqueous dispersion of a stabilized rosin acid. APEO free. General purpose, higher softening point.

GlucoSol® 721 is a new entry in the Chemstar water-soluble product line. It is a highly substituted natural polysaccharide designed to impart enhanced functional properties including: solution stability, salt tolerance, surface activity, water retention, improved rheology and viscosity. GlucoSol® 721 offers a unique alternative to competitive natural and synthetic water-soluble polymers

SCG Chemicals LP1024P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1024P is guaranteed its high quality for various applications.

SYLVALITE RE 85GB rosin ester is an ester of stabilized Tall Oil Rosin. This light colored product has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides excellent color stability when compared with other tackifiers of its type.

ICATACK 651 is a Aqueous, solvent-free dispersion of a stabilized rosin ester. APEO free.

West System 407-B Low-Density, 14 lb is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy. Add 407 to a mixture of epoxy resin/hardener to create a fairing putty. It’s easy to sand or carve this putty once it has cured. The filler is reasonably strong on a strength-to-weight basis. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy to a “peanut butter” consistency, it will be easy to fair. The higher the percentage of 407 in your epoxy mix, the easier it will be to fair. Cures to a dark red/brown color.

Polybut™ 6 is a low molecular weight conventional polybutene.

King Honor International KH FT WAX 120 is the coal-based Fischer-Tropsch wax. It has a higher melting point and the lower penetration. KH FT wax 120 is suitable to be used in road marking paints. Presently, the thermoplastic traffic marking paint is the most widely used on the roads as the autonomous vehicle guidance. It is generally composed of thermoplastic resin, pigments, and fillers. The addition of FT wax 120 can improve the dispersibility of pigment and filler in thermoplastic resin, and improve paint fluidity, prevent sedimentation, adjust viscosity, improved wear and stain resistance.

TACKIFIER 55 is a water-borne dispersion of modified natural resins. The product is solvent free. Ring & ball of the base resin = 62-65°C

Shiraishi Kogyo Kaisha Viscoexcel-30 is a ultra-fine calcium carbonate which has 30 nm of particle size. These particles are surface coated with fatty acid to improve dispersion property at the mixing. Viscoexcel-30 is developed and designed as calcium type rheologicalmodifier. Viscoexcel-30provides high viscosity and high thixotropicproperty, the same as fumed silica or organic agent. Viscoexcel-30provides better rheologicalproperty both at low and high shear area, also provides better workability at high shear area.

PalyGel® 325B is widely used in sealants & adhesives, asphalt coatings, joint compound, molecular sieve.

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

ONLY AVAILABLE OUTSIDE EUROPEAN UNION! TAFIGEL PUR 40 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 40 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 40 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

CLiQFLOW LP is an organically modified bentonite clay based rheological additive. The organo clay requires a high shear activation process andis recommended for low-to medium polar non-aqueous systems used for example in the adhesives, coatings or ink industry.

Soyanol™ 1000E is water-based additive for paints or stains, highly compatible with many chemistries, including most latex, acrylic and urethane emulsion systems, it helps develop high stability emulsions, increases open times, improves freeze / thaw performance over industry leading coalescents, also does double duty as coalescent and plasticizer, it is efficient and cost effective solution which has typical usage 2%-7%.

Aquadhes® 6002 is a a water-based rosin ester dispersion and solvent free.

Polybut EM 200(A-50) is a water-based emulsion of low molecular weight polybutene.

ShiraSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Mineral Spirits, Aromatic 100, Aromatic 150, Methyl Amyl Ketone, n-Butyl Acetate and other slow evaporating solvents. ShiraSol is formulated for use as a cleaner, primary or co-solvent in a variety of formulations involving aliphatic, aromatic and ketone solvent systems.

JINGYI BK-883 has a trong thickening ability, good compatibility, need polar activator. Applicable to low and middle polar solvent systems and also used in paints, printing inks, sealants, lubricating greases, paint filers, aromic ash, mixed paints. The international countertype of BK-883 is Bentone-34.

Polybut™ 80 is a low molecular weight conventional polybutene.

West System 404-45 High-Density Adhesive Filler, 43 oz is an epoxy thickening additive. We developed it for maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated. Blended with epoxy, it makes an excellent gap filler or structural filets. Use this filler wherever you need an especially strong bond. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

Kraton D1155 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below. Kraton D1155 ES - supplied as porous pellets dusted with amorphous silica Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen.

KemituraSil® 120 is used as a thickening and thixotropic agent in many organic systems, i.e. unsaturated polyesters, coatings, paints and lacquers, printing inks, adhesives, composites, pharmacy and in cosmetics. KemituraSil® 120 is used as reinforcing filler in elastomers, like silicones. KemituraSil® 120 is also used as free flow additive in technical powders, in food and feed where even small amounts significantly improve the flow properties.

Kraton D-1161 polymer is a clear linear triblock copolymer based on styrene and isoprene, with bound styrene of 15% mass. Kraton D-1161 polymer is used in fomulating adhesives ,sealants and coatings, and may also be used as a modifier of bitumen.

Polybut™ 10 is a low molecular weight conventional polybutene.

XYSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200m2/g, and it is synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis.

SCG Chemicals LP1100P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP11IOOP is guaranteed its high quality for various applications.

Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities.Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back

TAFIGEL PUR 64 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 64 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 64 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

THICR 118 is water-based Acrylic thickner. It is a cross- linked acrylic emulsion when emulsion is diluted with water & treated with alkali, each emulsion particle swells & emulsion becomes & viscous.

Adiplast Wax AD - PH is organic wax used in adhesive manufacturing.

Hydroxypropyl MethylCellulose (HPMC) are widely used in construction, pharmaceutical,food, cosmetic, detergent, paints, as thickener, emulsifier, film former, binder, dispersing agent, protective colloids.We can provide the regular grade HPMC, we also can provide modified HPMC according to customer requirements. After modified and surface treatment, we can get the goods which is dispersed in water quickly, lengthen open time, anti-sagging, etc.

TAFIGEL PUR 41 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 41 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 41 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

Fintac 2331 is a modified rosin which offers an excellent combination of oxidation and crystallization resistance. This product functions as a tackifier for SBR, natural rubber, butyl rubber, ethylene-vinyl acetate and other polymers. It can be delivered in flaked and solid forms. Formulated in solvent-based and water-based adhesives, it exhibits no tendency to crystallize. It meets the requirements of the Code of Federal Regulations, Title 21, under the following section: 175.105 Adhesives; 176.210 Defoaming Agents Used in the Manufacture of Paper and Paperboard; 177.2600 Rubber Articles Intended for Repeated Use.

Bisomer® PPA6 is a hydroxyl functional acrylate monomer.