Products

WIC PA66 30 BK EF is a polyamide 66 base polymer with 30% carbon fiber filler and black color, specially designed for easy flow and heat aging stabilization. It is mainly used in the automotive and sport market segments. Processing conditions include injection molding with a melt temperature of 280-300°C and a mold temperature of 80-120°C. Under certain conditions, increased thermal conductivity must be considered. To ensure optimal performance, it should be stored in a dry, light-protected environment.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 17090 WT1087-17 is a polycarbonate base material with a special filler/additive system that is UV stabilized and provides light scattering and high light transmission. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016. For pre-drying, conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours or in an air circulating dryer for 4-12 hours with a maximum moisture content of <0.02%. Processing injection molding should occur at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV WT1516-04LD is a polycarbonate material with a special filler/additive system that has been UV stabilized for translucent, light scattering properties and good flow. It is ideal for lamp covers, display elements, and operating elements in the automotive and lighting industries.

MOCOM Compounds ALCOM® HM ABS 1000 AG 14077 is a pre-drying Acrylonitrile/Butadiene/Styrene/Copolymer with hygienic material, light stabilizer, and natural color. It has antibacterial properties according to ISO 22196 and is used in the market segments of packaging, personal care, household goods, furniture, building and construction, and sport and leisure. It is mainly used in sanitary articles, hygiene products, domestic appliances, functional components, clothing/fasteners, housings, handles, and fittings.

MOCOM Compounds ALTECH® ECO PC 1000/128 is a UV-stabilized polycarbonate base polymer with easy release (demolding) characteristics. It is suitable for pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-3 hours, or in an air circulating dryer at 100-120°C for 4-12 hours, depending on moisture content, with a maximum moisture content of <0.02%. It is suitable for applications including exterior parts, light transparent components and injection molded parts, and is commonly used for lamp covers, housings, and various other products. It should be stored dry, protected from light, and kept away from direct sunlight.

MOCOM Compounds ALCOM® PC 740/4 UV CC1063-11LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and provides high light transmission and light scattering. It has excellent flow and is suitable for automotive and lighting applications, such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALFATER® XL A40I 4FC0010 is a thermoplastic vulcanizate (PP+EPDM) that is designed for injection molding applications. This material has a natural color with a bright inherent color and is compliant with EN 71-3 regulations for food contact. It is suitable for use in the packaging, household goods, food processing industry, toy markets, and other applications. The material has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is easy to flow and can be used for injection molded parts such as seals, sealing lips, handles, soft-touch elements, protection caps, caps/closures, containers, kitchenware, and 2K components, making it a reliable choice for many applications.

MOCOM Compounds ALTECH® PP-H A 4920/200 TV20 is a Polypropylene Homopolymer base polymer pre-dried in a dry air (dessiccant) dryer or an air circulating dryer at temperatures of 80-120°C for 2-4 hours. It is then processed through injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It offers benefits such as 20% talcum, good flow, low warpage, easy release (demolding), and slip agent. This material is suitable for electrical and electronic, building and construction, and sport and leisure applications and is used for injection molded parts, interior decoration/finishing, clothing/fasteners, housings, functional components, and different automotive powertrain parts.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15003 CC1002-15 is a polycarbonate base polymer filled with a special filler and UV stabilized. It is translucent, light scattering, and dependent on wall thickness, as well as having an easy flow. It is used in the automotive and lighting market segments for lighting and light transparent components, such as lamp covers, display elements, and operating elements, and has the GS93016 approval. It is processed through injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. To ensure optimal use of this product, it should be stored in a dry, light-protected environment.

MOCOM Compounds ALTECH® PP-B B 4920/526 MR20 UV is a polypropylene heterophasic copolymer with a 20% talcum filler/additive system that is UV stabilized, heat stabilized, easy to release (demolding), and processing stabilized. It is typically used for housings, handles, functional components, fixing elements, and other interior, power tools, exterior parts, and electrical components in the automotive, machinery, sport and leisure, and electrical and electronic market segments. It has good mechanical and thermal properties, providing a good balance between stiffness and impact resistance.

MOCOM Compounds ALTECH® PP-B A 4930/506 TV30 is a heat stabilized polypropylene heterophasic copolymer with a 30% talcum filler/additive system. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, providing features such as easy release (demolding) and good flow. It is suitable for use in building and construction, as well as in sport and leisure applications, such as functional components, housings, fixing elements, and bezels. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or an air circulating dryer at 80-120°C for 2-4 hours.

MOCOM Compounds ALCOM® PC 740/4 UV WT1368-04LD is a polycarbonate injection molding grade with a special filler/additive system and features such as light scattering, high light transmission and good flow. It is approved by GMW15702 and GS93016 and is suitable for applications in the automotive and lighting market segments, such as lamp covers, display elements and operating elements.

WIC PP 40 BKD is a deep black material with heat-age stabilization properties intended for use in automotive and sports applications. The base polymer is polypropylene and it contains 40% carbon fiber as a filler. Prior to processing via injection molding, the material must be pre-dried at 80°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 210 to 260°C, with a mold temperature between 30 and 60°C.

MOCOM Compounds ALCOM® HM ABS 1000 AG 17161 is a pre-drying condition acrylonitrile/butadiene/styrene/copolymer with a hygienic material filler/additive system. It is white in color, similar to RAL 9003, and has antibacterial properties according to ISO 22196. This material is suitable for packaging, personal care, household goods, and building and construction applications, and is suitable for injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C. To ensure optimal performance, it should be stored in a dry, light-protected area with a tightly sealed container.

MOCOM Compounds ALTECH® ABS A 1000/506 is a high heat and processing stabilized acrylonitrile/butadiene/styrene/copolymer injection molding grade suitable for various market segments, such as domestic appliances and injection molded parts. The pre-drying conditions require 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content, with a maximum moisture content of <0.20%. The melt temperature during injection molding should be between 200-240°C and the mold temperature should be between 50-80°C. The product should also be protected from light in an environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H FC 4920/100 MR20 is a polypropylene homopolymer with 20% talcum filler/additive system. When processing injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. It is characterized by easy release (demolding), processing stabilization, and heat stabilization. It is mainly used for building and construction, packaging, injection molded parts, domestic appliances, and interior decoration/finishing, such as bezels, housings, and functional components.

MOCOM Compounds ALCOM® LD PC 1000 UV 15027 GY1044-15 is a polycarbonate base polymer with a special filler/additive system that has been UV stabilized for increased durability. It is translucent, light scattering, with high light diffusion, good flow, and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It is used in the Automotive, Lighting market segment and is commonly used for lamp covers, display elements, and operating elements. For optimal performance, it must be pre-dried.

MOCOM Compounds ALTECH® PA6 B 2030/209 GF30 is a heat-stabilized, easy-release and easy-flow polyamide 6 reinforced with 30% glass fibers, designed for automotive, electrical and electronic, sport, and leisure applications. For injection molding, the melt temperature should be between 270-290°C and the mold temperature should be between 80-100°C. Common applications include housings, handles, functional components, and injection-molded parts. This product should be stored in a cool, dark place, not exceeding 30°C.

MOCOM Compounds ALCOM® PC 740/4 GY1177-05LD is a polycarbonate base polymer containing a special filler/additive system, featuring a translucent and light scattering appearance that is dependent on wall thickness and has good flow. It is suitable for use in automotive and lighting applications, and is typically used in lamp covers, display elements, and operating elements. It has approvals from GMW15702 and GS93016. Processing injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALTECH® ABS A 1000/906 is a copolymer of Acrylonitrile/Butadiene/Styrene that is suitable for injection molding and produces high surface quality components. The melt temperature should be between 200-240°C, and the mold temperature should be between 50-80°C. Typical applications include housings and gardening tools.

MOCOM Compounds ALFATER® XL A70I 3EFSL0000 is a thermoplastic vulcanisate (PP+EPDM) polymer suitable for injection molding. It has improved abrasion resistance, slip-optimized, easy flow, high surface quality, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications and can be used for injection molded parts such as seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, bearings and sliding elements, thin walled parts, profile, cable ducts, 2K components, and casters. It has good adhesion to various polymers and has a service temperature range of -40-125°C. The polymer should be stored dry, protected from light, at a temperature not exceeding 30°C, and tightly sealed.

MOCOM Compounds ALTECH® ECO PC 2015/509 GF15 is a polycarbonate containing 15% glass fibers, designed for easy release (demolding). It is suitable for use in electrical and electronic, building and construction segments and is typically applied for domestic appliances, electrical components, and various other applications. It should be processed using injection molding with a melt temperature of 280-300°C and a mold temperature of 80-100°C.

MOCOM Compounds ALCOM® PC 740/4 UV GY1118-12LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has a translucent, light scattering, and high light diffusion. It is used for automotive and lighting applications such as lamp covers, display elements, and operating elements with approvals of GS93016. The processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4.2 WT1159-10LD2 is a polycarbonate base polymer with a special filler/additive system for translucent, light scattering, and high light diffusion with good flow and heat-stabilized properties. It is used for Automotive and Lighting market segments, typically for lamp covers, display elements, and operating elements applications.

MOCOM Compounds ALCOM® PC 740/4 GF20 UV WT1105-13LD is a polycarbonate base polymer containing 20% glass fibers, special filler, and UV stabilizers. It is known for its translucency, light scattering, and high light diffusion, making it ideal for use in automotive and lighting industries for applications such as lamp covers, display elements, and operating elements. This material is processed by injection molding with a melt temperature of 290-320°C and mold temperature of 80-130°C.

MOCOM Compounds ALCOM® PC 740/4 CC1120-05LD is a polycarbonate base polymer with a special filler/additive system that offers light scattering, high light transmission, and good flow. It has been approved by GS93016 and requires pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours with a maximum moisture content of <0.02%. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® ABS 530/29 HM-AG is a Pre-Drying Conditions Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of hygienic material and light stabilizer, in white, similar to RAL 9003, gray, similar to RAL 7004, similar to RAL 7015, and similar to RAL 7043, with special features of antibacterial acc. to ISO 22196. It is marketed in segments such as packaging, personal care, household goods, furniture, building and construction, and sport and leisure, with application areas such as injection molded parts, and typical applications including sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings.

WIC PP 20 BK LE2 is a black polypropylene-based thermoplastic composite with 20% carbon fiber filler. It is suitable for injection molding, with a melt temperature range of 210–260 °C and a mold temperature range of 30–60 °C. Pre-drying is required at 80°C in an air-circulating dryer for 2-4 hours, depending on the moisture content, which should not exceed 0.10%. The material is UV- and heat-stabilized and has low emissions. It is primarily intended for use in the automotive and sports markets and offers excellent dimensional stability.

MOCOM Compounds ALCOM® HM PP 3030 19024 is a white polypropylene homopolymer with a 30% glass bead filler/additive system that has antibacterial properties according to ISO 22196. It is widely used in markets such as packaging, personal care, household goods, building and construction, and sport and leisure. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures.

MOCOM Compounds ALCOM® PC 740/4 UV CC1269-08LD is a polycarbonate-based material containing a special filler and light scattering, UV stabilized additives. It has GS93016 approval and is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. Injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALTECH® PC A 1000/572 UV is a polycarbonate-based polymer with a UV stabilized special feature and a release agent filler/additive system. It is typically used for applications in sport and leisure and should be stored in a dry and protected environment not exceeding 30°C. For processing injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C is required. No additional sentence is needed.

MOCOM Compounds ALTECH® PP-H A 3030/100 is a polypropylene homopolymer with a 30% glass bead filler/additive system, specially designed for easy release (demolding) and slip agent. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C and can be used to create building and construction, sport and leisure applications, such as injection molded parts, interior and household goods, hygiene products, and housings. To ensure best results, pre-drying conditions should be in an air circulating dryer at 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer at 80-120°C for 2-3 h.

MOCOM Compounds ALTECH® PP-H A 4940/100 MR40 is a Polypropylene Homopolymer base polymer with a 40% talcum filler/additive system. It has easy release (demolding) and slip agent features, as well as being heat stabilized. It is commonly used in the automotive, building and construction markets for interior decoration/finishing, gardening tools, injection molded parts, and functional components, such as housings. Pre-drying conditions include a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. Processing Injection molding melt temperature is 200-250°C and the mold temperature is 20-70°C. Ensure that the barrel and mold temperatures are properly set before starting the injection cycle.

MOCOM Compounds ALFATER® XL A50I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and black color that is used for injection molded parts. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance and hydrolysis resistance. The black color meets the requirements for weathering dry, hot (Kalahari, PV3929) and weathering moist, hot (Florida, PV3930). ALFATER® XL A50I 2GP0000 is used in the market segments of automotive, building and construction, electrical and electronic, machinery, and furniture and its application areas are injection molded parts. Typical applications are seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, plugs, fastener & connector, and 2K components. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer and thermoplastic elastomer general. It is widely used across industry applications and provides a great combination of properties.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 18075 CC1088-18 is a polycarbonate base polymer with a special filler/additive system providing features such as being translucent, having high light transmission, high light diffusion, light scattering, easy release (demolding), and good flow. It is processing stabilized and UV stabilized, making it suitable for injection molding with melt temperatures of 270-310°C and mold temperatures of 80-110°C. This material is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements, and is GS93016 approved.