Products

MOCOM Compounds ALTECH® PP-H A 2045/500 is a Polypropylene Homopolymer with 45% glass fibers, heat stabilized, extrusion grade, low emission, and processing stabilized. It is suitable for Pre-Drying Conditions in an air circulating dryer 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer 80-120°C for 2-3 h. Processing Injection molding is done at a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is used for building and construction, sport and leisure applications, such as functional components, housings, and sports equipment. It should not be exposed to strong UV radiation and should not be stored in direct sunlight.

MOCOM Compounds ALCOM® HM PP 1000 18038 is a pre-drying condition polypropylene copolymer with a hygienic material filler/additive system and a silver, metallic color similar to RAL 9022 and RAL 9023. It has antibacterial properties according to ISO 22196, and is used in packaging, personal care, household goods, furniture, building, and construction applications such as sanitary articles, hygiene products, kitchen ware, functional components, housings, handles, containers, and caps/closures. Processing injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALCOM® HM PP 3030 14029 is a polypropylene with 30% glass beads, hygienic material and gray color, featuring antibacterial properties according to ISO 22196. It is used in the packaging, personal care, household goods, furniture, building and construction markets. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures. Injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-90°C, with a maximum moisture content of <0.10%.

MOCOM Compounds ALTECH® PP-B B 4020/506 MR20 is a polypropylene copolymer with 20% mineral filler/additive system featuring easy release (demolding), processing stabilized, heat stabilized, and easy flow properties. It is suitable for the packaging, building and construction market segments, and typical applications include housings, functional components, and fixing elements. For processing injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C.

MOCOM Compounds ALCOM® LDX PC 1000 UV 14062 WT1140-14 is a translucent, light-scattering extrusion grade polycarbonate with a special filler and UV stabilized additive system. It is suitable for applications such as lighting, light-transparent components, and lamp covers. Pre-drying involves 120°C in a dry air (dessiccant) dryer for 2-4 hours, or 120°C in an air circulating dryer for 4-12 hours, with a maximum moisture content of less than 0.02%. Processing requires a melt temperature of 240-280°C and should be protected from light.

MOCOM Compounds ALCOM® HM PC+ABS 1000 AG 16152 is a hygienic material with antibacterial properties according to ISO 22196 in its natural color. It is designed for packaging, personal care, household goods, furniture, building and construction, and sport and leisure applications. It is suitable for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners, handles, profiles, etc.

MOCOM Compounds ALCOM® ABS+SAN A 1000/100 SV2067-06MCF has pre-drying conditions of 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours. Its base polymer is Acrylonitrile/butadiene/styrene + Styrene/acrylonitrile, and it has a metallic effect color. It has low tendency to flow lines and is used in the market segments of electrical and electronic, building and construction, and various. Its application area is for housings, fixing elements, and various, and it is processed by injection molding with a melt temperature of 220-260°C and mold temperature of 50-80°C. It should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-B A 4430/120 MR30 UV is a Polypropylene Heterophasic Copolymer with 20% chalk, 10% talcum, and UV, heat, and processing stabilizers, as well as easy release (demolding) properties. For injection molding, a melt temperature of 200-250°C and a mold temperature of 20-70°C should be used. This thermoplastic is suitable for building and construction, electrical and electronic, and sport and leisure market segments, and can be used for domestic appliances, gardening tools, and exterior parts. Typical applications include housings, fixing elements, and functional components.

MOCOM Compounds ALCOLOR® Function PA AO A WT1114-15 is a 6% dosage injection molding colorant for use in Polyamide with a base polymer of Polyamide, a light fastness colorant of blue woolscale 8, a filler/additive system of light stabilizer, a color of white, special features of being UV stabilized, free from cadmium, lead and diarylide pigments, dust-free, with a high additive content and high dispersibility, for use in various building and construction applications, such as door handles.

MOCOM Compounds ALCOM® PBT 700/9 is a pre-drying conditions polybutylene terephthalate (PBT) with a matt (textured) surface, used in the building and construction, fixtures/fittings, and household goods. Typical applications include kitchenware, fixing elements, and more. Processing injection molding requires a melt temperature of 250-270°C and a mold temperature of 60-100°C. For proper use, keep in a dry, protected environment, not above 30°C, and pre-dry in a dry air (dessiccant) dryer at 100-120°C for 2-4 h, or in an air circulating dryer at 100-120°C for 4-8 h, depending on the moisture content.

MOCOM Compounds ALTECH® PP-B A 2040/150 GF40 CP is a Polypropylene Heterophasic Copolymer with 40% glass fibers, chemically coupled, with an easy release (demolding) agent, and heat stabilization. It is suitable for the market segments of machinery, electrical and electronic, building and construction, and suitable for applications such as sports equipment, interior decoration/finishing, exterior parts, and electrical components. Typical applications include functional components, housings, and fixing elements.

MOCOM Compounds ALTECH® PP-H B 4910/500 MR10 is a polypropylene homopolymer that is processed using injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, containing 10% talcum and being processing stabilized and easy release (demolding). It is used in the market segments of packaging, furniture, building and construction, and is suitable for injection molded parts, interior decoration/finishing. Typical applications include racking/shelving, household goods, housings, and functional components. To ensure a good quality of the product, it should be stored in a cool, dark place, not exceeding 30°C.

MOCOM Compounds ALCOM® ABS 530/50 HM is a white, pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer with a hygienic filler/additive system and antibacterial properties according to ISO 22196. It has a melt temperature range of 220-260°C and a mold temperature range of 50-80°C. This product is suitable for injection molded parts such as sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings, and is used for applications in the packaging, personal care, household goods, furniture, building and construction, and sport and leisure markets. For optimal results, it should be stored in a dry, light-tightly sealed environment.

MOCOM Compounds ALCOM® HM PP 1000 AG 17005 is a pre-dried polypropylene copolymer containing a hygienic filler/additive system. The material is white, similar to RAL 9003, and has antibacterial properties according to ISO 22196. It is suitable for use in packaging, personal care, household goods, furniture, building, and construction applications. Injection molding of the material should be done with a melt temperature of 200-270°C and a mold temperature of 20-70°C. The material should be stored and handled in a tightly sealed environment.

MOCOM Compounds TEDUR® L FC 9510-6 is a polyphenylene sulfide base polymer filled with 40% glass fibers, designed for the machinery market segment. It is used for applications such as pipe fitting, pump components, and ducting/piping systems. It has high stiffness and is recommended to be pre-dried with a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content, before injection molding. For injection molding, the melt temperature should be 320-340°C, and the mold temperature should be greater than 140°C.

MOCOM Compounds ALTECH® PP-H A 3030/100 GB30 is a Polypropylene Homopolymer with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is composed of 30% glass beads and a special filler/additive system that includes easy release (demolding), slip agent, and heat stabilization. It is commonly used in building and construction, sport and leisure, and is suitable for injection molded parts and interior applications such as household goods, hygiene products, and housings. To ensure optimal performance, it should be stored in a dry and light-protected environment at a maximum temperature of 30°C.

MOCOM Compounds ALTECH® PP-H A 4818/100 MR18 is a Polypropylene Homopolymer with a Filler/Additive System of chalk, which features detergent solution stabilization, processing stabilization, and easy release (demolding). Processing Injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is suitable for building and construction applications and is often used in domestic appliances, housings, and functional components.

MOCOM Compounds ALTECH® PP-H FC 1000/100 DS is a polypropylene homopolymer that has special features such as detergent solution stabilization, good hydrolysis resistance, easy release (demolding) and a slip agent, as well as being heat stabilized. It is suitable for use in the electrical and electronic, packaging, and building and construction markets for applications such as food contact, injection molded parts and exterior parts. Typical applications include functional components and housings. For injection molding, processing should be done with a melt temperature of 200-240°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PA6 B 2015/100 GF15 is a polyamide 6-based product with 15% glass fibers, heat and processing stabilized, and easy release (demolding). It is suitable for building and construction, machinery, clothing/fasteners, and injection-molded parts applications. Pre-drying conditions must be 80°C in a dry air (dessiccant) dryer for 2-12 h depending on moisture content with a maximum moisture content of 0.15%. Processing temperature for injection molding should be between 270-290°C, mold temperature should be between 80-100°C, and it should be protected from light and stored at temperatures below 30°C.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 16077 is a hygienic material with antibacterial features according to ISO 22196. It is white in color, similar to RAL 9003, and is mainly used for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners. It is also suitable for applications such as packaging, personal care, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALTECH® PP-B B 2020/550 GF20 Pre-Drying Conditions is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. The base polymer is a polypropylene copolymer with a filler/additive system of 20% glass fibers that is chemically coupled, processing stabilized, and has easy release (demolding) and heat stabilizing features. The market segment for this material is building and construction, packaging, and its application areas are household goods, power tools, exterior parts, and filter systems. Typical applications include racking/shelving, handles, housings, and functional components. For storage, this material should be kept dry, protected from light, and not above 30°C.

MOCOM Compounds ALCOM® ABS 530/29 HM-AG is a Pre-Drying Conditions Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of hygienic material and light stabilizer, in white, similar to RAL 9003, gray, similar to RAL 7004, similar to RAL 7015, and similar to RAL 7043, with special features of antibacterial acc. to ISO 22196. It is marketed in segments such as packaging, personal care, household goods, furniture, building and construction, and sport and leisure, with application areas such as injection molded parts, and typical applications including sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings.

MOCOM Compounds ALTECH® PP-H A 3030/100 is a polypropylene homopolymer with a 30% glass bead filler/additive system, specially designed for easy release (demolding) and slip agent. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C and can be used to create building and construction, sport and leisure applications, such as injection molded parts, interior and household goods, hygiene products, and housings. To ensure best results, pre-drying conditions should be in an air circulating dryer at 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer at 80-120°C for 2-3 h.

MOCOM Compounds ALCOM® HM PP 3030 19024 is a white polypropylene homopolymer with a 30% glass bead filler/additive system that has antibacterial properties according to ISO 22196. It is widely used in markets such as packaging, personal care, household goods, building and construction, and sport and leisure. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures.

MOCOM Compounds TEDUR® L PPS 1000 15087 is a polyphenylene sulfide base polymer that has been elastomer modified for high toughness. It is suitable for both extrusion and injection molding. The pre-drying conditions should be in a dry air (dessiccant) dryer at 100-130°C for 2-4 hours. The melt temperature for extrusion should be 290-310°C, while the melt temperature and mold temperature for injection molding should be 290-310°C and >100°C respectively. This product is typically used for ducting/piping systems and functional components in the automotive and machinery market segments, providing superior toughness and performance.

MOCOM Compounds ALCOM® PC 730/3.1 UV WT1283-09LDM is a polycarbonate-based extrusion grade material with a special filler/additive system containing UV stabilizers, antioxidants, and light scattering properties, resulting in a low gloss finish. It is suitable for use in lighting applications and is typically used for lamp covers. The melt temperature range for extrusion is 240-280°C.

MOCOM Compounds ALCOM® PBT 700/9 BK2034-06MCS is a polybutylene terephthalate base polymer with a matt (textured) surface, used in building and construction, fixtures/fittings, household goods, and kitchenware for various applications. For optimal results, it should be pre-dried in a dry air (dessiccant) dryer at 100-120°C for 2-4 hours or in an air circulating dryer at 100-120°C for 4-8 hours, depending on moisture content. During processing, injection molding should be used with a melt temperature of 250-270°C and a mold temperature of 60-100°C. To ensure maximum product quality, the product should be protected from light at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® ABS A 1000/170 is a copolymer of Acrylonitrile/Butadiene/Styrene with good flow and processing stability, suitable for injection molding at melt temperatures of 200-240°C and mold temperatures of 50-80°C. It is used in a variety of applications such as electrical and electronic, building and construction, Medical/Personal Care, ducting/piping systems, domestic appliances, valve components, housings, printer housings, paper dispensers, and operating elements.

MOCOM Compounds ALCOM® HM PA6 1000 AG UV 15046 WT1077-15 is a pre-dried polyamide 6-based material with an additive system containing a hygienic material and light stabilizer. It is white in color, similar to RAL 9003 and RAL 9016, and has antibacterial properties according to ISO 22196. This material is suitable for use in personal care, household goods, furniture, building and construction, and sport and leisure applications. When processing with injection molding, the recommended melt temperature should be between 250-270°C and the mold temperature should be between 40-80°C.

MOCOM Compounds ALCOM® HM PP 1000 AG 14079 is a polypropylene homopolymer with a hygienic material filler/additive system and natural color. It has antibacterial features according to ISO 22196 and is suitable for applications in packaging, personal care, household goods, furniture, building and construction. Typical applications include sanitary articles, hygiene products, kitchenware, functional components, housings, handles, containers, and caps/closures.

MOCOM Compounds ALTECH® ECO PA6 1000/588 is a polyamide 6 base polymer that is fast solidifying, easy to release (demolding), heat stabilized, and contains recycled material. It is suitable for electrical and electronic, automotive, building and construction, and various other applications and is typically used for conduit, technical profiles, and various other applications. Pre-drying conditions should be 80°C in a dry air (desiccant) dryer for 2-12 hours, depending on moisture content. Processing injection molding should be done with a melt temperature of 250-270°C and a mold temperature of 40-80°C.

MOCOM Compounds TEDUR® L FC 9510-7 is a polyphenylene sulfide-based polymer containing 40% glass fibers, making it ideal for injection molding due to its high stiffness, easy flow and reduced flash. It is suitable for applications in the machinery, electrical and electronic, and building and construction markets, such as housings and parts in contact with drinking water.

MOCOM Compounds ALTECH® PA6 B 1000/270 is a Polyamide 6 base polymer with good flow and easy release (demolding) properties, making it suitable for use in the building and construction market segment. It is typically used for housings, clips, and functional components in exterior parts and injection molded parts.

MOCOM Compounds CELLIDOR® B 631-10 is a cellulose acetate butyrate base polymer used for injection molding with a phthalate-free plasticiser filler/additive system. It is pre-dried in a dry air (dessiccant) dryer or air circulating dryer at temperatures of 50-70°C for 1-2 h or 2-4 h respectively, depending on moisture content. The extrusion melt temperature ranges from 190-235°C, and indie temperature from 40-80°C. It is used in the sport and leisure and various market segments for extruded parts and profiles, with typical applications such as protection-strips and grease reservoirs. The parts produced using this polymer have excellent dimensional stability and high strength.

MOCOM Compounds ALCOM® HM PA6 1000 SB1038-21 is a pre-dried polyamide 6 with a hygienic filler/additive system, colored black, with antibacterial properties according to ISO 22196. It is designed for automotive, personal care, electrical and electronic, furniture, building and construction, and sport and leisure applications, and is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C. Typical applications include sanitary articles, hygiene products, domestic appliances, functional components, housings, handles, fittings, and clothing/fasteners.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 14069 is a hygienic material composed of a Polyamide + Acrylonitrile Butadiene Styrene Blend, available in gray, similar to RAL 7015 and RAL 7042. It has antibacterial properties according to ISO 22196 and can be used for packaging, personal care, furniture, building and construction, and sport and leisure applications.